Oval concrete domes

• Autorzy: Kobielak S. , Zamiar Z.

Identyfikatory

DOI

10.1016/j.acme.2016.11.009

• Języki publikacji: EN

Abstrakty

EN

The paper presents a review and update of the design and construction of oval concrete domes with a particular emphasis on the rectangular plane, with rounded corners, of the RC dome constructed in Wrocław, Poland, which is one of the few shells of this type realized in the world. The roots of oval domes lie in mediaeval times, when they were made as masonry. The best known dome examples of this period, as well as the development outline of thin oval concrete structures and the data on the geometry of such domes were given. One of the major challenges in the realization of such non-standardized concrete domes is applying novel, cost-effective forming techniques in their construction. A review of innovative low cost aesthetic forming systems of thin concrete shells was made. Nearly a half of the paper makes a description of the design and construction of Wrocław's oval dome (23.7 m × 18.20 m × 4.70 m) of thickness 80 mm, which covers the rectangular nave of the church building. The RC dome is supported by two longitudinal and two transversal beams (200 mm × 2600 mm), which rest in the four corners of the building's masonry walls. The geometry and equations of the section curves as well as the results of a static analysis with the use of FEM as well as reinforcement drawings of the dome and its support beams were given. The particular phases of the dome construction illustrated by means of drawings were presented.

Słowa kluczowe

EN

concrete oval domes; structural design; forming techniques

PL

betonowa kopuła; konstrukcja strukturalna; technika formowania

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2017
• Tom: Vol. 17, no. 3
• Strony: 486--501
• Opis fizyczny: Bibliogr. 49 poz., fot., rys., wykr.

Twórcy

autor

Kobielak S.

• Wroclaw University of Environmental and Life Science, Faculty of Environmental Engineering and Geodesy, Poland

autor

Zamiar Z.

• Wroclaw University of Environmental and Life Science, Faculty of Environmental Engineering and Geodesy, Poland

Bibliografia

• [1] J. Barrallo, Ovals and ellipses in architecture, in: Proc. of ISAMA 2011 Tenth Interdisciplinary Conference of the International Society of the Arts, Mathematics, and Architecture, Columbia College, Chicago, IL, June 13–17, (2011) 9–18.
• [2] www.beiteversocrumbly.files.wordpress.com/2013/07/ san_carlo_plan.jpg.
• [3] www:upload.wikimedia.org/Wikipedia/commons/7/76/ Dome_San_Carlo_alle_Quattro _Fontane.20.06.jpg.
• [4] www.wikipedia.org.
• [5] T. Aoki, M.A. Chiorino, R. Roccati, Structural characteristics of the elliptical masonry dome of the sanctuary of Vicoforte, in: S. Huerta, I. Juan de Herrera, SEdHC, ETSAM, A.E. Benvenuto, COAM, F. Dragados (Eds.), Proceedings of the First International Congress on Construction History, Madrid, 20– 24th January 2003, (2003) 203–212.
• [6] www:wikipedia/wiki/File:Vicoforte_Basilica-della_Nativit% C3%AO_di_Maria_ Santissima_Dome_001.JPG.
• [7] T. Aoki, M.A. Chiorino, A. Spadafora, Structural analysis with F.E. method of the elliptical dome of the Sanctuary of Vicoforte, in: Proc. First Intern. Conf. Innovative Materials and Technologies for Construction and Restoration – IMTCR04, Liguori, Naples, 2003 417–429.
• [8] J. Jasieńko, K. Raszczuk, M. Moczko, M. Piechówka-Mielnik, Selected Aspects of the Structural Analysis of the North Dome in the ‘‘Four Domes Pavilion Civil and Environmental Engineering Reports’’, vol. 17(2), 2015, pp. 33–41.
• [9] E. Ramm, E. Schunck, Heinz Isler Schalen, Karl Krämer Verlag, Stuttgart, DE, 1986.
• [10] J. Chilton, An Engineer's Contribution to Contemporary Architecture – Heinz Isler Thomas Telford, RIBA Publications, 2000 168 pp.
• [11] B. Peerderman, Analysis of Thin Concrete Shells Revisited: Opportunities Due to Innovations in Materials and Analysis Methods, Master's thesis, Delft, 2008.
• [12] A. Muttoni, F. Lurati, M.F. Ruiz, Concrete Shells – Towards Efficient Structures: Construction of an Ellipsoidal Concrete Shell in Switzerland, 2013, 43–50.
• [13] S. Huerta, Oval domes: history, geometry and mechanics, Nexus Network Journal 2 (2) (2007) 211–248.
• [14] www.Fractional-calculus.com/super_ellipse.pdf.
• [15] www.dezeen.com (Soumaya Museum by Fernando Romero Architects).
• [16] www.designboom.com (Soumaya Museum by Fernando Romero Architects).
• [17] www.wroclaw.pl/en/four-domes-pavilion-is-ready-photos- video.
• [18] www.jerusalempedia.com/Israel Goldstein_Synagogue.html.
• [19] www.emporis.com/building/israelgoldsteinsynagogue- jerusalem-israel.
• [20] J. Chilton, 39 etc. . .: Heinz Isler's infinite spectrum of new shapes for shells, in: A. Domingo, C. Lazaro (Eds.), Proc. of the International Association for Shell and Spatial Structures (IASS) Symposium 2009, Valencia Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, 28 September–2 October, Universidad Politecnica de Valencia, Spain, 2009 51–62.
• [21] D. Billington, The Art of Structural Design: A Swiss Legacy, Princeton University Art, 2003.
• [22] F. Huijben, F. van Herwijnen, R. Nijsse, Concrete shell structures revisited: introducing a new ‘‘Low-Tech’’ construction method using vacuumatics formwork, in: E. Oñate, B. Kröplin, K.-U. Bletzinger (Eds.), International Conference on Textile Composites and Inflatable Structures: Structural Membranes, 2011, 409–420.
• [23] S.N. Krivoshapko, C.A. Bock Hyeng, I.A. Mamieva, Chronology of erection of the earliest reinforced concrete shells, IJRRAS 18 (February (2)) (2014) 95–118.
• [24] B. Balakrishna, A Unique Recognition for Shell Structures and R. Sundaram, The Masterbuilder, 2012, pp. 126–128.
• [25] R. Sundaram, Developing new ideas in the design of shell and spatial structures, The Indian Concrete Journal (2012) 27–28.
• [26] R. Sundaram, Shell structures, The Magazine (2015).
• [27] www.upload.wikimedia.org/Wikipedia/commons.
• [28] www.intecc.com-Larsen&Toubro Limited.
• [29] www.monolithic.com.
• [30] www.monolithic.org featured-community-domes, Turkey- Cultural Center: The new Ankara CSO Concert Hall—a modern marvel surrounded by Turkish History.
• [31] M. Mihailescu, R. Sundaram, Construction methods and quality control ROF concrete shell roofs, in: Proc. of the Intern. Assoc. for Shell and Spatial Structures (IASS) Symposium 2009, Valencia, Spain 28 September–2 October, (2009) 177–197.
• [32] J. Schlaich, W. Sobek, Suitable shell shapes, Concrete International (January) (1986) 41–46.
• [33] W. Sobek, On design and construction of concrete shells, Cement 1991 nr 11 pp. 23–27, in: B. Kroplin, E. Onate (Eds.), Structural Membranes, CIMNE, Barcelona, Spain, 2011 421–431.
• [34] M.K. Hurd, Concrete sphere houses French planetarium www.concreteconstruction.net.
• [35] D. Bini, 1500 buildings shaped by air, in: Save Conference Proceedings, 1984, 187–191.
• [36] www.bini.com.
• [37] B. Kromoser, J. Kolleger, Pneumatic forming of hardened concrete – building shells in the 21st century, Structural Concrete 16 (2) (2015) 161–171.
• [38] M. West, Fabric-Formed Concrete, Centre for Architectural Structures and Technology, Manitoba, Canada, 2006.
• [39] D. Veenendaal, M. West, B. Block, History and overview of formwork: using fabrics for concrete casting, Structural Concrete 12 (3) (2011) 164–177.
• [40] J. Brennan, R. Pedreschi, P. Walker, M. Ansell, The potential of advanced textiles for fabric formwork, ICE Proc. of the Institution of Civil Engineers, Construction Materials 166 (August (CM4)) (2013) 229–237.
• [41] R.F. Pedreschi, The use of fabrics as formwork for concrete \structures and elements, in: B. Kroplin, E. Onate (Eds.), Proceedings of 5th International Conference on Textile Composites and Inflatable Structures: Structural Membranes, CIMNE, Barcelona, Spain, 2011 421–431.
• [42] T.J. Andersen, W.C. da Silva, L.N. Thrane, Lessons from the TaylorCrete Project Innovative Industrial Methods for Future Digital Concrete Architecture, vol. 145, Concrete Society of Southern Africa Concrete Beton, 2016, pp. 16–21.
• [43] www.superpool.org.
• [44] S. Dallinger, J. Kolleggger, Pneumatic formwork for concrete and ice shells, in: B. Kröplin, E. Oñate (Eds.), Int. Conference on Textile Composites and Inflatable Structures: Structural Membranes, Barcelona, 2009.
• [45] Austrian University Develops ‘‘Inflatable’’ Concrete Dome Method, Building Design + Construction, June, 2014.
• [46] N. Cauberg, T. Tysmans, S. Adriaenssens, J. Wastiels, M. Mollaert, B. Belkassem, Shell elements of textile reinforced concrete using fabric formwork, Advances in Structural Engineering 15 (4) (2012) 689.
• [47] www.caro.sdu.dk.
• [48] M. Pierrat, Y. L'Huby, A. Decelle, Optimization of design and erection methods to minimize the construction time schedule of EPR plants, in: 7th International Conference on Nuclear Engineering, Tokyo, Japan, April 19–23, 1999.
• [49] P. Steadman, Why are most building rectangular? ARQ 10 (2) (2006) 119–130.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)