Multi criteria decision making model for producing multiple products at the same time

• Autorzy: Mokao Rami

Identyfikatory

DOI

10.24425/mper.2020.134936

• Języki publikacji: EN

Abstrakty

EN

The Decision Makers in the production organizations, which produce multiple different products at the same time, set the priorities for what the organization desires to produce. This priority is sorting the products in order to schedule the production based on these priorities. The production organizations receive a huge number of orders from different customers, each order contains many products with close delivery dates. The organization aims to produce multiple different products at the same time, in order to satisfy all customers by delivering all orders at the right time. This study will propose a method to prioritize the production to produce a multiple different products at the same time, the production lines will produce multiple different products. This method will prioritize the products using Multi Criteria Decision Making technique, and prioritize the production operations using a new algorithm called Algorithm for Prioritization of Production Operations. In addition, the study will provide an algorithm for production scheduling using the production priority calculated based on the proposed method. The study will also compare the scheduling based on the priority rules and based on the proposed method through total production time and the variety of products produced.

Słowa kluczowe

EN

production priority; priority rules; production scheduling; time table

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2020
• Tom: Vol. 11, No. 3
• Strony: 92--105
• Opis fizyczny: Bibliogr. 50 poz., rys., tab., wykr.

Twórcy

autor

Mokao Rami

• Decision Support Systems Master, Higher Institute for Applied Science & Technology, Damascus, Syria

Bibliografia

• [1] Parnaby J., Concept of a manufacturing system, International Journal of Production Research, 17, 2, 123–135, 1979.
• [2] Baker K.R., Introduction to sequencing and scheduling, Handbook Oper. Res. Manag. Sci., 28, 203, 1974.
• [3] Liu S.Q., Ong H.L., Metaheuristics for the mixed shop scheduling problem, Asia-Pacific Journal of Operational Research, 21, 4, 97–115, 2004.
• [4] Graves C.S., A review of production scheduling, Operations Research, 29, 4, 646–675, 1981.
• [5] Robert A.W., Samit C., Introduction to the scheduling problem, IEEE Design & Test of Computers, 12, 2, 60–69, 1995.
• [6] Huang Y., Kanal L.N., Tripathi S.K., Reactive scheduling for a single machine: problem definition, analysis, and heuristic solution, International Journal of Computer Integrated Manufacturing, 3, 1, 6–12, 1990.
• [7] Brucker P., Scheduling algorithms, Springer Berlin Heidelberg New York, ISBN 978-3-540-20524-1, 4th ed., 2007.
• [8] Bera H., Gannon M.J., Optimization techniques applied to job-shop scheduling, IFAC Proceedings Volumes, 23, 3, 333–335, 1990.
• [9] Wojakowski P., Warżolek D., The classification of scheduling problems under production uncertainty, Research in Logistics & Production, 4, 3, 245–255, 2014.
• [10] Lei D., Multi-objective production scheduling: a survey, The International Journal of Advanced Manufacturing Technology, 43, 926, 2009.
• [11] Rodammer F.A., Wight K.P., A recent survey of production scheduling, IEEE Transactions on Systems, Man, and Cybernetics, 18, 6, 841–851, 1999.
• [12] Jones A., Rabelo L.C., Survey of Job Shop Scheduling Techniques, Wiley Encyclopedia of Electrical and Electronics Engineering, 1999, doi: 10.1002/047134608X.W3352.
• [13] Behnamian J., Survey on fuzzy shop scheduling, Fuzzy Optimization and Decision Making, 15, 3, 331–366, 2015.
• [14] Arisha A., Young P., Elbaradie M.A., Job shop scheduling problem: an overview, International Conference for Flexible Automation and Intelligent Manufacturing (FAIM 01), Dublin, Ireland, July 2001, 682–693, 2001, doi: 10.21427/D7WN5Q.
• [15] Mellor P., A review of job shop scheduling, Journal of the Operational Research Society, 17, 2, 161–171, 1966.
• [16] Sharma P., Jain A., A review on job shop scheduling with setup times, Journal of Engineering Manufacture, 2015, doi: 10.1177/0954405414560617.
• [17] Buxey G., Production scheduling: Practice and theory, European Journal of Operational Research, 36, 1, 17–31, 1989.
• [18] McKay K.N., Wiers V.C.S., Unifying the theory and practice of production scheduling, Journal of Manufacturing Systems, 18, 4, 241–255, 1999.
• [19] Chan F.T.S., Au K.C., Chan P.L.Y., A decision support system for production scheduling in an ion plating cell, Expert Systems with Applications, 30, 2006, 727–738, 2013.
• [20] Chen T., Zhou G., Modeling production scheduling problem and its solution by genetic algorithm, Journal of Computers, 8, 8, 2126–2133, 2013.
• [21] Chan F.T.S., Wong T.C., Chan L.Y., Flexible jobshop scheduling problem under resource constraints, International Journal of Production Research, 44, 11, 2071–2089, 2006.
• [22] Azzouz A., Ennigrou M., Said L.B., A hybrid algorithm for flexible job-shop scheduling problem with setup times, International Journal of Production Management and Engineering, 5, 1, 23–30, 2016.
• [23] Phanden R.K., Jain A., Verma R., A genetic algorithm-based approach for job shop scheduling, Journal of Manufacturing Technology Management, 23, 7, 937–946, 2012.
• [24] Ramazan S., The new Fundamental Tree Algorithm for production scheduling of open pit mines, European Journal of Operational Research, 177, 2, 1153– 1166, 2007.
• [25] Akyol D.E., Bayhan G.M., A review on evolution of production scheduling with neural networks, Computers & Industrial Engineering, 53, 1, 95–122, 2007.
• [26] Bao L.W., Lu Y.Z., Neural network based real-time production scheduling for industrial processes, IFAC Proceedings Volumes, 22, 13, 85–90, 1989.
• [27] Lundgren G.M., Lundgren J.T., Persson J.A., An optimization model for refinery production scheduling, International Journal of Production Economics, 78, 3, 255–270, 2002.
• [28] Wang J., Luh P.B., Zhao X., Wang J., An optimization-based algorithm for job shop scheduling, Sadhana, 22, 2, 241–256, 1997.
• [29] Calleja G., Pastor R., A dispatching algorithm for flexible job-shop scheduling with transfer batches: an industrial application, Journal Production Planning & Control: The Management of Operations, 25, 4, 93–109, 2013.
• [30] Panwalkar S.S., Iskander W., A survey of scheduling rules, Operations Research, 25, 1, 45–61, 1977.
• [31] Haupt R., A survey of priority rule-based scheduling, Operations-Research-Spektrum, 11, 1, 3–16, 1989.
• [32] Holthaus O., Rajendran C., Efficient dispatching rules for scheduling in a job shop, International Journal of Production Economics, 48, 1, 87–105, 1997.
• [33] Sels S., Gheysen N., Vanhoucke M., A comparison of priority rules for the job shop scheduling problem under different flow time- and tardiness-related objective functions, International Journal of Production Research, 50, 15, 4255–4270, 2012.
• [34] Barman S., Lisboa J.V., Cost performance of simple priority rule combinations, Journal of Manufacturing Technology Management, 21, 5, 567–584, 2010.
• [35] Kawai T., Fujimoto Y., An efficient combination of dispatch rules for job-shop scheduling problem, INDIN ’05, 2005 3rd IEEE International Conference on Industrial Informatics, 2005.
• [36] Koruca H.I., Aydemir E., A priority rule based production scheduling module on faborg-sim simulation tool, Gazi University Journal of Science, 27, 4, 1143– 1155, 2014.
• [37] Iringova M., Vazan P., Kotianova J., Jurovata D., The comparison of selected priority rules in flexible manufacturing system, Proceedings of the World Congress on Engineering and Computer Science, 2, WCECS 2012, 2012.
• [38] Triantaphyllou E., Shu B., Sanchez S.N., Ray T., Multi-criteria decision making: an operations research approach, Encyclopedia of Electrical and Electronics Engineering, 15, 1998, 75–186, 1998.
• [39] Linkov I., Satterstrom F.K., Tkachuk A., Seager T.P., A multi-criteria decision analysis approach for prioritization of performance metrics, Managing Critical Infrastructure Risks, Springer 2007, 261– 298, 2007.
• [40] Kolios A., Mytilinou V., Minguez E.L., Salonitis K., A comparative study of multiple-criteria decisionmaking methods under stochastic inputs, Energies, 2016, 9, 566, 2016.
• [41] Pamucar D., Bozanic D., Randjelovic A., Multicriteria decision making: An example of sensitivity analysis, Serbian Journal of Management, 12, 1, 1–27, 2017.
• [42] Kumar K.K., Nagaraju D., Gayathri S., Narayanan S., Evaluation and selection of best priority sequencing rule in job shop scheduling using hybrid MCDM technique, Frontiers in Automobile and Mechanical Engineering, IOP Conf. Series: Materials Science and Engineering, 197, 2017, 012059, 2017.
• [43] Leoneti A.B., Consideration regarding the choice of ranking multiple criteria decision making methods, Pesquisa Operacional, 36, 2, 259–277, 2016.
• [44] Podviezko A., Podvezko V., Influence of data transformation on multicriteria evaluation result, Procedia Engineering, 122, 2015, 151–157, 2015.
• [45] Wang Y., Liu D., Ruhe G., Formal description of the cognitive process of decision making, IEEE Transactions on Systems, Man, and Cybernetics (C), 36, 2, 124–133, 2004.
• [46] Niyazi M., Tavakkoli-Moghaddam R., Solving a facility location problem by three multi-criteria decision making methods, International Journal of Research in Industrial Engineering, 3, 4, 41–56, 2014.
• [47] Dodgson J., Spackman M., Pearman A., Phillips L., Multi-criteria analysis: a manual, Department for Communities and Local Government: London, (Chapter 5), 30–45, 2009.
• [48] Podvezko V., Application of AHP technique, Journal of Business Economics and Management, 10, 2, 181–189, 2009.
• [49] Yoon K.P., Hwang C.L., Multiple attribute decision making: an introduction, SAGE Publications, Inc; 1 edition, 1995.
• [50] Vieira G.E., Herrmann J.W., Lin E., Rescheduling manufacturing systems: a framework of strategies, policies, and methods, Journal of Scheduling, 6, 1, 39–62, 2008.