Wear analysis of die inserts in the hot forging process of a forked type forging using reverse scanning techniques

• Autorzy: Dworzak Ł. , Hawryluk M. , Ziemba J.

Identyfikatory

DOI

10.12913/22998624/80318

• Języki publikacji: EN

Abstrakty

EN

This article presents a wear analysis of die inserts used in the hot forging process of a forked forging (yoke), an element applied in steering systems of passenger vehicles. Studies involved the application of an original reverse scanning method intended for rapid and reliable wear analysis of forging tools (with complicated shape) affording easy assessment without the need to dismount tools from the forging unit. The developed method involves analysis of progressive wear of forging tools based on measurements (scanning) of forgings periodically collected from the process and constitutes a useful tool for measurement and testing. As the authors’ earlier works have demonstrated, the proposed new approach to analysis of tool wear with the application of reverse 3D scanning has proven successful in multiple instances in the case of axially symmetrical objects. The presented results of studies indicate that it is possible to utilize the expanded method to analyze the lifetime of forging tools, including tools with complex geometry. Application of the reverse scanning method allows for continuous and practical monitoring of the condition of forging tools over the course of the forging process and should have a positive impact on improving production output and reducing production costs.

Słowa kluczowe

EN

forging tool wear; destructive mechanisms; reverse 3D scanning; lubricating; and cooling device

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 4
• Strony: 225--238
• Opis fizyczny: Bibliogr. 37 poz., fig.

Twórcy

autor

Dworzak Ł.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Department of Plastic Forming and Metrology, ul. Łukasiewicza 5, 50-371

autor

Hawryluk M.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Department of Plastic Forming and Metrology, ul. Łukasiewicza 5, 50-371

autor

Ziemba J.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Department of Plastic Forming and Metrology, ul. Łukasiewicza 5, 50-371

Bibliografia

• 1.Anders P., Hogmark S., Bergström J. Simulation and evaluation of thermal fatigue cracking of hot work tool steels. International Journal of Fatigue, 10, 2004, 1095–1107.
• 2.Archard J.F. Contact and Rubbing of flat surfaces. Journal of Applied Physics, 24, 1953, 981–988.
• 3.Berti G.A., Monti M. Thermo-mechanical fatigue life assessment of hot forging die steel. Fatigue & Fracture of Engineering Materials & Structures, 28(11), 2005,1025–1034.
• 4.Cechura M., Chval Z. Convectional versus multiple operating press. Brno, 2013, 67–70.
• 5.Choi Ch., Groseclose A., Altan T. Estimation of plastic deformation and abrasive wear in warm forging dies. Journal of Materials Processing Technology, 212(8), 2012, 1742–1752.
• 6.Chval Z. Effect of heat load to the forming machines. MM Science Journal, 2013, 418–421.
• 7.Gąska A., Olszewska M. Ocena odwzorowania kształtu za pomocą współrzędnościowego ramienia pomiarowego wyposażonego w głowicę optyczną. Postępy Nauki i Techniki, 7, 2011, 37–43.
• 8.Groche P., Brenneis M. Manufacturing and use of novel sensoric fasteners for monitoring forming processes. Measurement, 53, 2014, 136–144.
• 9.Gronostajski Z. Hawryluk M., Jakubik J., Kaszuba M., Misiun G., Sadowski P. Solution examples of selected issues related to die forging. Archives of Metallurgy and Materials, 60(4), 2015, 2767–2775.
• 10.Gronostajski Z., Hawryluk M. The main aspects of precision forging. Archives of Civil and Mechanical Engineering, 8(2), 2008, 39–57.
• 11.Gronostajski Z., Hawryluk M., et al. The application of the reverse 3D scanning method to evaluate the wear of forging tools divided on two selected areas. International Journal of Automotive Technology, 18(4), 2017, 653−662.
• 12.Gronostajski Z., Hawryluk M., Kaszuba M., Ziemba J. Application of a measuring arm with an integrated laser scanner in the analysis of the shape changes of forging instrumentation during production. Eksploatacja i Niezawodnosc – Maintenance and Reliability, 18 (2), 201,. 194–200. http://dx.doi.org/10.17531/ein.2016.2.6.
• 13.Gronostajski Z., Kaszuba M., Hawryluk M., Marciniak M., Zwierzchowski M., Mazurkiewicz A., Smolik J. Improving durability of hot forging tools by applying hybrid layers. Metallurgy, 54 (4), 2015, 687–690.
• 14.Gronostajski Z., Kaszuba M., Polak S., Zwierzchowski M., Niechajowicz A., Hawryluk M. The failure mechanisms of hot forging dies. Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, 657, 2016, 147–160.
• 15.Hawryluk M. Metody analizy oraz zwiększania trwałości narzędzi kuźniczych stosowanych w procesach kucia matrycowego na gorąco. Monograficzna seria wydawnicza Problemy Eksploatacji i Budowy Maszyn, ISBN 978–83–7789–410–1, Wyd. Naukowe ITE – PIB, Radom 2016.
• 16.Hawryluk M. Review of selected methods of increasing the life of forging tools in hot die forging processes. Archives of Civil and Mechanical Engineering, 16, 2016, 845–866. http://dx.DOI:0.1016/j.acme.2016.06.001.
• 17.Hawryluk M., Mrzygłód B. A durability analysis of forging tools for different operating conditions with application of a decision support system based on artificial neural networks (ANN). Eksploatacja i Niezawodność – Maintenance and Reliability, 19(3), 2017, 338–348, http://www.ein.org.pl/sites/default/files/2017–03–04p.pdf
• 18.Hawryluk M., Ziemba J. Possibilities of application measurement techniques in hot die forging processes. Measurement, 110, 2017, 284–295.
• 19.Hawryluk M., Ziemba J. The possibility of using scanning techniques in forging applications. Obróbka Plastyczna Metali, 27 (1), 2017, 39–58.
• 20.Hawryluk M., Ziemba J., Sadowski P. A review of current and new measurement techniques used in hot die forging processes. Measurement and Control, 50 (3), 2017, 74–86, https://doi.org/10.1177/0020294017707161.
• 21.Juras B., Szewczyk D. Dokładność pomiarów realizowanych skanerem optycznym. Postępy Nauki i Techniki, 2011, 29÷36.
• 22.Kima D.H., Leeb H.C., Kimc B.M., Kimd K.H. Estimation of die service life against plastic deformation and wear during hot forging processes. Journal of Materials Processing Technology, 212, 2012, 1742– 1752.
• 23.Kocańda A. Określenie trwałości narzędzia w obróbce plastycznej metali, rozdział w monografii pt. Informatyka w Technologii Metali, red. A. Piela, F. Grosman, J. Kusiak i M. Pietrzyk, Wydawnictwo Politechniki Śląskiej, Gliwice, 2003, 213–256.
• 24.Kuş A. Implementation of 3d optical scanning technology for automotive applications. Sensors, 9, 2009, 1967–1979.
• 25.Lange K., Cser L., Geiger M., Kals J.A.G. Tool Life and Tool Quality in Bulk Metal Forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture November, 207, 1993, 223–239.
• 26.Lavtar L., Muhic T., Kugler G., Tercelj M. Analysis of the main types of damage on a pair of industrial dies for hot forging car steering mechanisms. Engineering Failure Analysis, 18(10), 2011, 1143–1152.
• 27.Lee S.R., Lee Y.K., Park C.H., Yang D.Y. A new method of preform design in hot forging by using electric field theory. Int. J. Mech. Sci, 44, 2002, 773–792.
• 28.Lu B., Ou H., Long H. Die shape optimisation for net-shape accuracy in metal forming using direct search and localised response surface methods. Structural and Multidisciplinary Optimization, 44, 2011, 529–545.
• 29.Machácek P., Tomícek J. Application of laser scanning in reverse engineering and prototype manufacturing. WTP, 1(21) 2010, 35–44.
• 30.Persson A., Hogmarkb S., Bergstroma J. Thermal fatigue cracking of surface engineered hot work tool steels. Surface & Coatings Technology,191, 2005, 216– 227.
• 31.Ratajczyk E. Współrzędnościowe ramiona pomiarowe i ich testy dokładności. Przegląd Elektrotechniczny, 5, 2008, 181–185.
• 32.Sedighi M., Tokmechi S. A new approach to preform design in forging process of complex parts. J. Mater. Process. Technol. 97(1–3), 2005, 314–324.
• 33.Starlinga C., Brancob J. Thermal fatigue of hot work tool steel with hard coatings. Thin Solid Films, 308(309), 1997, 436–442.
• 34.Taylan A., Gracious N., Gangshu S. Cold and hot forging fundamentals and application. ASM International. Asm metals handbook, 14, 2005, 337–338.
• 35.Vazquez V., Altan T. Die design for flashless forging of complex parts. J. Mater. Process. Technol, 98, 2000, 81–89.
• 36.Wieczorowski M., Ruciński M., Koteras R. Application of optical scanning for measurements of castings and cores. Archives of Foundry Engineering, 10, 2010, 265−268.
• 37.Xian-bin Fu., Bin Liu., Yu-cun Z., Li-na L. Fault diagnosis of hydraulic system in large forging hydraulic press. Measurement, 49, 2014, 390–396.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)