Effect of Boron and Tungsten Carbides on the Properties of TiC-Reinforced Tool Steel Matrix Composite Produced by Powder Metallurgy

• Autorzy: Slokar Benić Ljerka , Šubić Jadranko , Erman Žiga

Identyfikatory

DOI

10.24425/amm.2020.132791

• Języki publikacji: EN

Abstrakty

EN

The influence of boron carbide and tungsten carbide on the apparent porosity, density, coercive force, hardness and micro-structure of metal matrix composite of the Ferro-TiC type, is presented in this paper. The samples of investigated steel/titanium carbide composite were produced by powder metallurgy process, i.e. by powders mixing and compacting followed by sintering in the vacuum furnace. According to the results, steel/titanium carbide composite materials with addition up to 11.9 vol.% of boron carbide are interesting to detailed investigation as well as materials having more than 17.2 vol.% of tungsten carbide because these compositions show significant changes in hardness and coercive force values.

Słowa kluczowe

EN

metal matrix composite; steel/TiC composite; powder metallurgy; properties; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 539--547
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab., wykr.

Twórcy

autor

Slokar Benić Ljerka

• University of Zagreb Faculty of Metallurgy, Aleja Narodnih Heroja 3, 44000 Sisak, Croatia

autor

Šubić Jadranko

• Elmech Sintermak Ltd., Zagreb, Croatia

autor

Erman Žiga

• University of Ljubljana Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia

Bibliografia

• [1] V. K. Rai, R. Srivastava, S. K. Nath, Wear. 231 (2), 265-271 (1999), DOI: 10.1016/S0043-1648(99)00127-1
• [2] W. Jing, W. Yisan, Mater. Lett. 61 (22), 4393-4395 (2007), DOI: 10.1016/j.matlet.2007.02.011
• [3] F. Akhtar, Can. Metall. Q. 53 (3), 253-263 (2014), DOI: 10.1179/1879139514Y.0000000135
• [4] B. Li, Y. Liu, H. Cao, L. He, J. Li. Mater. Lett. 63 (23), 2010-2012 (2009), DOI: 10.1016/j.matlet.2009.06.026
• [5] M. Razavi, M. S. Yaghmaee, M. R. Rahimipour, S. S: Razavi-Tousi, Int. J. Miner. Process. 94 (3-4), 97-100 (2010), DOI: 10.1016/j.minpro.2010.01.002
• [6] http://www.ferro-tic.com/grade.html [cited: 2018 May 6]
• [7] M. Razavi, M. R. Rahimipour, A. H. Rajabi-Zamani, Mater. Sci. Eng. A 454-455,144-147 (2007), DOI: 10.1016/j.msea.2006.11.035
• [8] M. Foller, H. Meyer, Proceedings of the 6th International Tooling Conference: The Use of Tool Steels : Experience and Research, Vol II, Karlstad University, 1373-1389 (2002).
• [9] Ö. N. Doğan, J. A. Hawk, J. H. Tylczak, Wear. 250 (1-12), 462-469 (2001), DOI: 10.1016/S0043-1648(01)00635-4
• [10] Ö. N. Doğan, J. A. Hawk, J. H. Tylczak, R. D. Wilson, R. D. Govier, Wear. 225-229, 758-779 (1999), DOI: 10.1016/S0043-1648(99)00030-7
• [11] K. Liu (Ed.), Tungsten Carbide, InTechOpen (2012).
• [12] I. Kovač, R. Mikuš, J. Žarnovsky, R. Drlička, J. Žitňanský, A. Výrostková, Kovove Mater. 52, 387-394 (2014), DOI: 10.4149/km20146387
• [13] M. Kolnes, A. Mere, J. Kübarsepp, M. Viljus, B. Maaten, M. Tarraste, Powder Metall. 61 (3), 197-209 (2018), DOI: 10.1080/00325899.2018.1447268
• [14] H. Klaasen, J. Kübarsepp, F. Sergejev, Powder Metall. 52 (2), 111-115 (2009), DOI: 10.1179/174329008X315575
• [15] H. Reshetnyak, J. Kübarsepp, Powder Metall. 41 (3), 211-216 (1998), DOI: 10.1179/pom.1998.41.3.211
• [16] R. Zheng, X. Hao, Y. Yuan, Z. Wang, K. Ameyama, C. Ma, J. Alloys Compd. 576, 291-298 (2013), DOI: 10.1016/j.jall-com.2013.04.141
• [17] F. Akhtar, I. S. Humail, S. J. Askari, J. Tian, G. Shiju, Int J Refract Met Hard Mater. 25 (5-6), 405-410 (2007), DOI: 10.1016/j.ijrmhm.2006.11.005
• [18] H. Suzuki, S. Nishida, T. Fujiura, Kobelco Technol Rev. 30, 24-29 (2011).
• [19] American Society for Metals, Powder Metal Technologies and Applications. ASM, (1998).
• [20] R. Kieffer, F. Benesovsky, Hartmetalle, Springer, Wien (1965).
• [21] A. From, R. Sandström, Int. J. Refract. Met. Hard. Mater. 14 (5-6), 405-410 (1996), DOI: 10.1016/S0263-4368(96)00041-8
• [22] http://www.azom.com/article.aspx?ArticleID=75 [cited: 2018 May 11]

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).