Application of injection method to modify titanium alloy Ti6Al4V

• Autorzy: Klimas J. , Łukaszewicz A. , Szota M. , Nabiałek M.
• Konferencja: 24th Conference on Biomaterials in medicine and veterinary medicine : 9--12 October 2014, Rytro, Poland
• Języki publikacji: EN

Abstrakty

EN

In the present work, the samples were subjected to a comparative analysis of the titanium alloy Ti6Al4V prepared by various methods. The research included a comparison of the following properties of manufactured elements: microstructure, phase composition and surface roughness. The test results clearly showed that these properties are different when using different method of casting. These changes allows the use of prepared elements in medicine.

Słowa kluczowe

EN

biomaterials; titanium alloy Ti-6Al-4V; massive amorphous alloy

• Wydawca: Polish Society for Biomaterials in Cracow
• Czasopismo: Engineering of Biomaterials
• Rocznik: 2014
• Tom: Vol. 17, no. 128-129
• Strony: 91--92
• Opis fizyczny: Bibliogr. 4 poz., tab., wykr., zdj.

Twórcy

autor

Klimas J.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Material Engineering, 19 Armii Krajowej Ave., 42-200 Częstochowa

autor

Łukaszewicz A.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Material Engineering, 19 Armii Krajowej Ave., 42-200 Częstochowa

autor

Szota M.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Material Engineering, 19 Armii Krajowej Ave., 42-200 Częstochowa

autor

Nabiałek M.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Physics, 19 Armii Krajowej Ave., 42-200 Częstochowa

Bibliografia

• [1] Jurczyk M., Jakubowicz J.: Biomateriały, Wydawnictwo Politechniki Poznańskiej, Poznań 2008.
• [2] Klimas J., Dudek A. Klimas M.: Surface Refinement of Titanium Alloy Ti6Al4V ELI, Engineering of Biomaterials R.15 nr 116 -117, 2012.
• [3] Klimas J., Szota M., Nabiałek M., Łukaszewicz A., Bukowska A.: Comparative Description of Structure and Properties of Ti-6Al-4V Titanium Alloy for Biomedical Applications Produced by Two Methods: Conventional (Molding) and Innovative (Injection) Ones. Journal of Achievements in Materials and Manufacturing Engineering Vol.61 Iss.2, 2013, s.195 - 201.
• [4] Nabiałek M.: Wytwarzanie oraz właściwości amorficznych i nanokrystalicznych stopów żelaza, Wydawnictwo Politechniki Częstochowskiej, Częstochowa, 2012.