Identyfikatory
Warianty tytułu
Polikarboksylanowe domieszki upłynniające mieszankę betonową: aktualny stan wiedzy
Języki publikacji
Abstrakty
An extensive analysis of the possibilities and goal in the application of composites as an alternative to thermoplastic polymer composites filled with minerals has been presented. The analysis was made taking into special consideration the mechanical properties and applicability of polypropylene composites, which are widely used and well characterized. It was shown that the enthusiasm and expectations linked with the vision of the application of thermoplastics filled with plant fibers from widely available renewable sources as cheap materials with attractive properties has not been fully justified. The realistic solution would be maintaining the production of these new materials derived from waste polyolefins and renewable fiber materials from agriculture and forestry industries for low-end applications.
Podstawowym składnikiem betonu są obecnie domieszki chemiczne. Za najważniejsze uznaje się superplastyfikatory, czyli domieszki silnie redukujące zawartość wody w mieszance betonowej. Do najefektywniejszych znanych superplastyfikatorów zaliczają się polikarboksylany i ich pochodne. Artykuł stanowi przegląd aktualnej literatury dotyczącej polikarboksylanowych domieszek chemicznych. Scharakteryzowano metody syntezy i sposoby modyfikacji polimerów z grupami karboksylowymi i omówiono mechanizm działania takich superplastyfikatorów. Przedstawiono zależność między strukturą chemiczną polikarboksylanów a stopniem upłynnienia mieszanki betonowej oraz prognozę rozwoju superplastyfikatorów.
Czasopismo
Rocznik
Tom
Strony
474--481
Opis fizyczny
Bibliogr. 71 poz., rys.
Twórcy
autor
- Warsaw University of Technology, Faculty of Civil Engineering, Department of Building Materials Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
autor
- Warsaw University of Technology, Faculty of Civil Engineering, Department of Building Materials Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
autor
- Warsaw University of Technology, Faculty of Chemistry, Noakowskiego 3, 00-664 Warsaw, Poland
Bibliografia
- [1] Czarnecki L., Łukowski P.: Cement Wapno Beton 2010, 15, 243.
- [2] Aïtcin P.-C.: “Binders for Durable and Sustainable Concrete”, Taylor & Francis, London 2008.
- [3] Czarnecki L., Kurdowski W., Mindess S.: “Developments in the Formulation and Reinforcement of Concrete” (Ed. Mindess S.), Woodhead Publishers Ltd., Abington, Cambridge 2008, pp. 270–284.
- [4] Aïtcin P.-C., Eberhardt A.B.: “Science and Technology of Concrete Admixtures” (Ed. Aïtcin P., Flatt R.J.), Woodhead Publishing, 2015.
- [5] Plank J., Sakai E., Miao C. et al.: Cement and Concrete Research 2015, 78, 81. http://dx.doi.org/10.1016/j.cemconres.2015.05.016
- [6] BS-EN 934-2 (2009), British Standards Institution, London.
- [7] Gołaszewski J.: Construction and Building Materials 2012, 35, 586. http://dx.doi.org/10.1016/j.conbuildmat.2012.04.070
- [8] Plank J., Sachsenhauser B., De Reese J.: Cement and Concrete Research 2010, 40, 699. http://dx.doi.org/10.1016/j.cemconres.2009.12.002
- [9] Plank J., Zhimin D., Keller H. et al.: Cement and Concrete Research 2010, 40, 45. http://dx.doi.org/10.1016/j.cemconres.2009.08.013
- [10] Malferrari D., Fermani S., Galletti P. et al.: Langmuir 2013, 29, 1938. http://dx.doi.org/10.1021/la304618f
- [11] Borget P., Galmiche L., Le Meins J., Lafuma F.: Colloids and Surfaces A: Physicochemical and Engineering Aspects 2005, 260, 173. http://dx.doi.org/10.1016/j.colsurfa.2005.03.008
- [12] Duan G., Huang G., Li A. et al.: Journal of Molecular Liquids 2012, 174, 129. http://dx.doi.org/10.1016/j.molliq.2012.07.013
- [13] Winnefeld F., Becker S., Pakusch J., Götz T.: Cement and Concrete Composites 2007, 29, 251. http://dx.doi.org/10.1016/j.cemconcomp.2006.12.006
- [14] Peng X.Y., Yi C.H., Deng Y.H., Qiu X.Q.: International Journal of Polymeric Materials and Polymeric Biomaterials 2011, 60, 923. http://dx.doi.org/10.1080/00914037.2010.551369
- [15] Kjeldsen A.M., Flatt R.J., Bergström L.: Cement and Concrete Research 2006, 36, 1231. http://dx.doi.org/10.1016/j.cemconres.2006.03.019
- [16] Ran Q., Somasundaran P., Miao C. et al.: Journal of Colloid Interface Science 2009, 336, 624. http://dx.doi.org/10.1016/j.jcis.2009.04.057
- [17] Zingg A., Winnefeld F., Holzer L. et al.: Journal of Colloid Interface Science 2008, 323, 301. http://dx.doi.org/10.1016/j.jcis.2008.04.052
- [18] Zingg A., Winnefeld F., Holzer L. et al.: Cement and Concrete Composites 2009, 31, 153. http://dx.doi.org/10.1016/j.cemconcomp.2009.01.005
- [19] Rai S., Gajbhiye N.: Indian Journal of Chemical Technology 2008, 15, 349.
- [20] Üzer E., Plank J.: Cement and Concrete Research 2016, 82, 100. http://dx.doi.org/10.1016/j.cemconres.2015.12.009
- [21] Felekoğlu B., Sarıkahya H.: Construction and Building Materials 2008, 22, 1972. http://dx.doi.org/10.1016/j.conbuildmat.2007.07.005
- [22] Fan W., Stoffelbach F., Rieger J. et al.: Cement and Concrete Research 2012, 42, 166. http://dx.doi.org/10.1016/j.cemconres.2011.09.006
- [23] Li C., Feng N., Chen R.: Cement and Concrete Research 2005, 35, 867. http://dx.doi.org/10.1016/j.cemconres.2004.04.031
- [24] Chang W., Li H., Wei M. et al.: Materials Research Innovations 2009, 13, 7. http://dx.doi.org/10.1179/143307509X402101
- [25] Ma X.: Journal of Wuhan University of Technology-Materials Science Edition 2010, 25, 799. http://dx.doi.org/10.1007/s11595-010-0095-y
- [26] Lu S., Liu G., Ma Y., Li F.: Journal of Applied Polymer Science 2010, 117, 273. http://dx.doi.org/10.1002/app.31984
- [27] Lv S., Duan J., Gao R. et al.: Polymers for Advanced Technologies 2012, 23, 1596. http://dx.doi.org/10.1002/pat.3034
- [28] Lv S., Gao R., Duan J. et al.: Journal of Applied Polymer Science 2012, 125, 396. http://dx.doi.org/10.1002/app.35606
- [29] Lei J., Li H., Du X., Zhang A.: Iranian Polymer Journal 2013, 22, 117. http://dx.doi.org/10.1007/s13726-012-0110-6
- [30] Lv S., Ju H., Qiu C. et al.: Journal of Applied Polymer Science 2013, 128, 3925. http://dx.doi.org/10.1002/app.38608
- [31] Liu X., Wang Z., Zheng Y. et al.: Materials 2014, 7, 6169. http://dx.doi.org/10.3390/ma7096169
- [32] Li Y., Yang C., Zhang Y. et al.: Construction and Building Materials 2014, 64, 324. http://dx.doi.org/10.1016/j.conbuildmat.2014.04.050
- [33] Zhang Y., Kong X.: Cement and Concrete Research 2015, 69, 1. http://dx.doi.org/10.1016/j.cemconres.2014.11.009
- [34] Łaźniewska-Piekarczyk B.: Construction and Building Materials 2014, 53, 488. http://dx.doi.org/10.1016/j.conbuildmat.2013.11.092
- [35] Lange A., Plank J.: Cement and Concrete Research 2012, 42, 484. http://dx.doi.org/10.1016/j.cemconres.2011.11.017
- [36] Morin V., Tenoudji F.C., Feylessoufi A., Richard P.: Cement and Concrete Research 2001, 31, 63. http://dx.doi.org/10.1016/S0008-8846(00)00428-2
- [37] Chen B.: Journal of Wuhan University of Technology-Materials Science Edition 2015, 30, 533. http://dx.doi.org/10.1007/s11595-015-1185-7
- [38] Ding Q., Zhu Y., Wnag Y. et al.: Journal of Wuhan University of Technology-Materials Science Edition 2012, 27, 768. http://dx.doi.org/10.1007/s11595-012-0545-9
- [39] Ran Q., Liu J., Miao C., Yan S.: Procedia Engineering 2012, 27, 223. http://dx.doi.org/10.1016/j.proeng.2011.12.447
- [40] Ng S., Metwalli E., Müller-Buschbaum P., Plank J.: Cement and Concrete Research 2013, 54, 191. http://dx.doi.org/10.1016/j.cemconres.2013.09.002
- [41] Ren Q., Zou H., Liang M. et al.: RSC Advances 2014, 4, 44018. http://dx.doi.org/10.1039/c4ra05542j
- [42] Jun Y., Jeong Y., Oh J.E. et al.: KSCE Journal of Civil Engineering 2014, 19, 1787. http://dx.doi.org/10.1007/s12205-014-1189-4
- [43] Liu M., Lei J., Guo L. et al.: Thermochimica Acta 2015, 613, 54. http://dx.doi.org/10.1016/j.tca.2015.05.020
- [44] Kong F., Pan L., Wang C., Xu N.: Construction and Building Materials 2016, 105, 545. http://dx.doi.org/10.1016/j.conbuildmat.2015.12.178
- [45] Ferrari L., Bernard L., Deschner F. et al.: Journal of the American Ceramic Society 2012, 95, 2189. http://dx.doi.org/10.1111/j.1551-2916.2012.05189.x
- [46] Huang H., Qian C., Zhao F. et al.: Construction and Building Materials 2016, 110, 293. http://dx.doi.org/10.1016/j.conbuildmat.2016.02.041
- [47] Wu H., Guo H., Lei J. et al.: Frontiers of Chemistry in China 2007, 2, 322. http://dx.doi.org/10.1007/s11458-007-0060-2
- [48] Plank J., Pöllmann K., Zouaoui N. et al.: Cement and Concrete Research 2008, 38, 1210. http://dx.doi.org/10.1016/j.cemconres.2008.01.007
- [49] Jiang L., Li R., Sun K.: Bulletin of the American Ceramic Society 2013, 5, 852.
- [50] Liu X., Wang Z., Zhu J. et al.: Colloids and Surfaces A: Physicochemical and Engineering Aspects 2014, 448, 119. http://dx.doi.org/10.1016/j.colsurfa.2014.02.022
- [51] Lei L., Plank J.: Cement and Concrete Research 2012, 42, 1299. http://dx.doi.org/10.1016/j.cemconres.2012.07.001
- [52] Lei L., Plank J.: Industrial and Engineering Chemistry Research 2014, 53, 1048. http://dx.doi.org/10.1021/ie4035913
- [53] Sowoidnich T., Rachowski T., Rößler C. et al.: Cement and Concrete Research 2015, 73, 42. http://dx.doi.org/10.1016/j.cemconres.2015.01.016
- [54] Kashani A., Provis J.L., Xu J. et al.: Journal of Materials Science 2014, 49, 2761. http://dx.doi.org/10.1007/s10853-013-7979-0
- [55] Lv S., Gao R., Cao Q. et al.: Cement and Concrete Research 2012, 42, 1356. http://dx.doi.org/10.1016/j.cemconres.2012.06.006
- [56] Ran Q., Wang X., Shu X. et al.: Journal of Dispersion Science and Technology 2016, 37, 431. http://dx.doi.org/10.1080/01932691.2015.1042585
- [57] Plank J., Schroefl C., Gruber M. et al.: Journal of Advanced Concrete Technology 2009, 7, 5. http://dx.doi.org/10.3151/jact.7.5
- [58] Pourchet S., Liautaud S., Rinaldi D., Pochard I.: Cement and Concrete Research 2012, 42, 431. http://dx.doi.org/10.1016/j.cemconres.2011.11.011
- [59] Schröfl C., Gruber M., Plank J.: Cement and Concrete Research 2012, 42, 1401. http://dx.doi.org/10.1016/j.cemconres.2012.08.013
- [60] Wang D., Cheng P., Xiong W. et al.: Journal of Wuhan University of Technology-Materials Science Edition 2012, 27, 684. http://dx.doi.org/10.1007/s11595-012-0529-9
- [61] Peng X., Li X., Li Z.: Journal of Dispersion Science and Technology 2013, 34, 1265. http://dx.doi.org/10.1080/01932691.2012.738130
- [62] Marchon D., Sulser U., Eberhardt A., Flatt R.J.: Soft Matter 2013, 9, 10719. http://dx.doi.org/10.1039/c3sm51030a
- [63] Autier C., Azéma N., Boustingorry P.: Colloids and Surfaces A: Physicochemical and Engineering Aspects 2014, 450, 36. http://dx.doi.org/10.1016/j.colsurfa.2014.02.050
- [64] Dalas F., Nonat A., Pourchet S. et al.: Cement and Concrete Research 2015, 67, 21. http://dx.doi.org/10.1016/j.cemconres.2014.07.024
- [65] Dalas F., Pourchet S., Nonat A. et al.: Cement and Concrete Research 2015, 71, 115. http://dx.doi.org/10.1016/j.cemconres.2015.02.001
- [66] Bessaies-Bey H., Baumann R., Schmitz M. et al.: Cement and Concrete Research 2016, 80, 1. http://dx.doi.org/10.1016/j.cemconres.2015.10.010
- [67] Zhu J., Li Y., Zhang G. et al.: Colloid and Polymer Science 2015, 293, 1093. http://dx.doi.org/10.1007/s00396-014-3488-1
- [68] Guo W., Sun N., Qin J. et al.: Journal of Applied Polymer Science 2012, 125, 283. http://dx.doi.org/10.1002/app.35565
- [69] Li Y., Zheng J., Guo H., Lu M.: Journal of Dispersion Science and Technology 2014, 36, 369. http://dx.doi.org/10.1080/01932691.2014.911105
- [70] Wiliński D.: Challenges of Modern Technology 2015, 6, 51.
- [71] Łukowski P.: Journal of Building Chemistry 2016, 1, 31. http://dx.doi.org/10.17461/j.buildchem.2016.105
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e19aa0b1-e34e-4e61-9296-3bfb85ddb9b7