Cryogenically treated goat and human hair reinforced hybrid polymer composites

• Autorzy: Thasthagir Syed M , Kumar Ramesh R , Mariappan Mathanbabu , Senthamaraikannan P.

Identyfikatory

DOI

10.14314/polimery.2024.5.4

Warianty tytułu

PL

Hybrydowe kompozyty polimerowe wzmocnione włosem kozim i ludzkim poddane obróbce kriogenicznej

• Języki publikacji: EN

Abstrakty

EN

Composites of epoxy resin reinforced with goat and human hair were obtained and subjected to cryogenic processing for 24 hours at temperature 77 K. Morphological (SEM), mechanical and thermogravimetric analyses (TGA) were performed. The best properties were obtained by using a reinforcement consisting of 60 wt% human hair and 40 wt% goat hair. The SEM confirmed good interactions at the interface for this composite.

PL

Otrzymano kompozyty żywicy epoksydowej wzmocnionej kozim i ludzkim włosem, które poddano obróbce kriogenicznej przez 24 godziny w temperaturze 77 K. Zbadano strukturę (SEM), właściwości mechaniczne i termiczne (TGA). Najlepsze właściwości uzyskano stosując wzmocnienie składające się z 60% mas. włosa ludzkiego i 40% mas. włosa koziego. Metodą SEM potwierdzono dla tego kompozytu dobre oddziaływania na granicy faz.

Słowa kluczowe

EN

goat hair; human hair; epoxy resin; composites; cryogenic treatment

PL

futro kozie; włos ludzki; żywica epoksydowa; kompozyt; obróbka kriogeniczna

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2024
• Tom: Vol. 69, nr 5
• Strony: 312--317
• Opis fizyczny: Bibliogr. 21 poz., fot., rys., tab., wykr.

Twórcy

autor

Thasthagir Syed M

• Department of Automobile Engineering, K.S.R. College of Engineering, Tiruchengode, Namakkal, Tamilnadu 637215 India

• https://orcid.org/0000-0001-6730-6651

autor

Kumar Ramesh R

• Department of Automobile Engineering, K.S.R. College of Engineering, Tiruchengode, Namakkal, Tamilnadu 637215 India

• https://orcid.org/0000-0001-8394-9454

autor

Mariappan Mathanbabu

• Department of Mechanical Engineering, Government College of Engineering, Bargur, Krishnagiri, 635104 Tamilnadu, India

• https://orcid.org/0000-0002-1306-8990

autor

Senthamaraikannan P.

• Department of Mechanical Engineering, K.S.R. College of Engineering, Tiruchengode, Namakkal, Tamilnadu, 637215 India

• https://orcid.org/0000-0002-5136-2269

Bibliografia

• [1] Ali H., Rohit K., Dixit S.: Journal of Natural Fibers 2023, 20(1), 2181268. https://doi.org/10.1080/15440478.2023.2181268
• [2] Waghmare S., Shelare S., Aglawe K. et al.: Materials Today: Proceedings 2022, 54(3), 682. https://doi.org/10.1016/j.matpr.2021.10.379
• [3] Manivannan J., Rajesh S., Mayandi K. et al.: Journal of Natural Fibers 2022, 19(11), 4007. https://doi.org/10.1080/15440478.2020.1848743
• [4] Neto J., Queiroz H., Aguiar R. et al.: Journal of Renewable Materials 2022, 10(3), 561. https://doi.org/10.32604/jrm.2022.017434
• [5] Jayaseelan J., Vijayakumar K.R., Ethiraj N. et al.: IOP Conference Series: Materials Science and Engineering 2017, 282, 012018. https://doi.org/10.1088/1757-899X/282/1/012018
• [6] Verma A., Singh V. K., Verma S.K. et al.: International Journal of Waste Resources 2016, 6, 1000206. http://dx.doi.org/10.4172/2252-5211.1000206
• [7] Lakshmaiya N., Kaliappan S., Patil P.P. et al.: Coatings 2022, 12(11), 1675. https://doi.org/10.3390/coatings12111675
• [8] Kumar Sinha H., Thakur N.: International Journal of Aerospace, Mechanical, Structural and Mechatronic Engineering 2015, 1, 2454.
• [9] Gupta A.: Journal of Waste Management 2014, 498018. https://doi.org/10.1155/2014/498018
• [10] Jayachandran A.H., Mercy J.L: International Journal of Chemical Technology Research 2016, 9(3), 57.
• [11] Mathew T., VS A.K., Nr S. et al.: International Journal of Engineering and Computer Science 2017, 4, 6667.
• [12] Velmurugan G., Natrayan L., Chohan J.S. et al.: Biomass Conversion and Biorefinery 2023. https://doi.org/10.1007/s13399-023-04591-1
• [13] Shindo Y., Takeda T., Narita F.: Cryogenics 2012, 52(10), 564. https://doi.org/10.1016/j.cryogenics.2012.07.008
• [14] Li Y., Wei Y., Meng J. et al.: Composites Communications 2022, 35, 101326. https://doi.org/10.1016/j.coco.2022.101326
• [15] Rahman F., Wahid-Saruar M., Shefa H.K. et al.: Journal of Natural Fibers 2023, 20(1), 2168820. https://doi.org/10.1080/15440478.2023.2168820
• [16] Vinod B., Sudev L.J.: Materials Today: Proceedings 2022, 64(1), 330. https://doi.org/10.1016/j.matpr.2022.04.692
• [17] Kumar T.N., Goutami K., Aditya J. et al.: IOSR Journal of Mechanical and Civil Engineering 2015, 12(4), 65. http://doi.org/10.9790/1684-12466575
• [18] Sreenivasa C.G., Joshi A.G.: “Influence of Cryogenic Treatment on Mechanical Behavior of Glass Fiber-Reinforced Plastic Composite Laminate” in “Polymers at Cryogenic Temperatures” (Editors: Kalia. S., Fu S.-Y.), Springer Berlin, Heidelberg 2013, p. 181.
• [19] Zhang M., Pan R., Liu B. et al.: Materials 2023, 16(1), 396. https://doi.org/10.3390/ma16010396
• [20] Shao Y., Xu F., Liu W. et al.: Composites Part B: Engineering 2017, 125, 195. https://doi.org/10.1016/j.compositesb.2017.05.077
• [21] Nanda B.P., Satapathy A.: IOP Conference Series: Materials Science and Engineering 2017, 178, 012012. http://doi.org/10.1088/1757-899X/178/1/012012