Implementation of Innovative Methods for the Creation of Strategy Algorithms in CAD/CAM System Edgecam

• Autorzy: Čuboňová Nadežda , Dodok Tomáš , Kuric Ivan , Císar Miroslav

Identyfikatory

DOI

10.12913/22998624/92100

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the issue of the machining process optimization by using the algorithms that were proposed for the creation of NC strategies in CAD / CAM systems. The possibilities to create NC strategy in CAD / CAM systems using Feature Based Machining were analyzed using Edgecam’s Strategy Manager Module, Mastercam’s FBM Drill, and Machining Knowledge Editor in the Siemens NX10. Strategy Manager Module of CAD/CAM system Edgecam was suggested for experimental use. On the basis of the of NC strategy creation definition in this system, the algorithms for creating of new NC strategies were proposed, and database application for this NC strategies were created. The use of created NC strategies will eliminate the repetitive steps in creating the machining process and shorten the NC program creation.

Słowa kluczowe

EN

NC strategies; strategy manager; Feature Base Machining; Edgecam 2016 R2

PL

strategie NC; menadżer strategii; podstawowa obróbka; Edgecam 2016 R2

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 4
• Strony: 10--18
• Opis fizyczny: Bibliogr. 15 poz., fig., tab.

Twórcy

autor

Čuboňová Nadežda

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Dodok Tomáš

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Kuric Ivan

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Císar Miroslav

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovak Republic

Bibliografia

• 1. Čuboňová N. and Císar M. Design of camera mount and its application for monitoring machining process. Advances in Science and Technology, 9(26), 2015, 34–40.
• 2. Čuboňová N.: Genetic algorithms implemented for optimization of technological processes. Chosen applications of computer modelling in mechanical engineering. Pearson Education Limited, 2015.
• 3. Dodok T., Čuboňová N. and Rudawska A. Analysis of shapes for the development of algorithms for strategies of machining process in the CAM system. Academic Journal of Manufacturing Engineering, Editura Politehnica, 15(1), 2017, 6–10.
• 4. Dodok T., Čuboňová N. and Kuric I. Workshop Programming as a Part of Technological Preparation of Production. Advances in science and technology, 11(1), 2017, 111–116.
• 5. Krajcovic M., Bulej V., Sapietova A. and Kuric I. Intelligent manufacturing systems in cxoncept of digital factory. Komunikacie, 15(2), 2013, 77–87.
• 6. Kumičáková D., Gorski F., Milecki A. and Grajewski, D. Utilization of advanced simulation methods for solving of assembly processes automation partial tasks. Manufacturing Technology, 13(4), 2013, 478–486.
• 7. Kuric I., Zajačko I. and Císar M. Analytical intelligence tools for multicriterial diagnostics of CNC machines. Advances in Science and Technology, 10(32), 2016, 59–64.
• 8. Kuric I. Dynamic classification system. Chosen applications of computer modelling in mechanical engineering. Pearson Education Limited, 2015.
• 9. Legutko S. Materials for Cutting Tools. Development of Mechanical Engineering as a Tool for the Enterprise Logistics progress, Poznan, Poland 2006, 33–49
• 10. Náprstková N. Students connecting to production problems resolutions in CAD/CAM area. 9th International Scientific Konference – Engineering for rural development 2010, Jelgava, Litvia 2010, 310–314.
• 11. Rudawska A., Čuboňová N., Pomaranska K., Stančeková D. and Gola A. Technical and Organizational Improvements of Packaging Production Process. Advances Science and Technology, 10(30), 2016, 182–192.
• 12. Rudawska A., Reszka M., Warda T., Miturska I., Szabelski J., Stančeková D. and Skoczylas A. Milling as a method of surface treatment in adhesive bonding. Journal of Adhesion Science and Technology, 30(23), 2016, 2619–2636.
• 13. Sadílek M., Kratochvíl J., Petrů J., Cep R., Zlámal T. and Stančeková, D. Cutting tool wear monitoring with the use of impedance layers. Tehnicki Vjesnik, 21(3), 2014, 639 – 644.
• 14. Sága M., Vaško M., Čuboňová N. and Piekarska, W. Optimisation Algorithms in Mechanical Engineering Applications. Pearson, 2016.
• 15. Stuchlý V., Poprocký R. and Kaczmarek M. Reliability evaluation as a means of increasing the efficiency of equipment maintenance. Advances in science and technology research journal, 10(32), 2016, 40–46.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).