Influence of Shot Peening on Abrasion Wear in Real Conditions of Ni-Cu-Ausferritic Ductile Iron

• Autorzy: Wieczorek A. N.

Identyfikatory

DOI

10.1515/amm-2016-0320

• Języki publikacji: EN

Abstrakty

EN

The paper presents results of the wear tests of chain wheels made of austempered ductile iron with various content of residual austenite. The aim of this study was to demonstrate the impact of the dynamic surface treatment (shot peening) on wear properties of surface layers of the chain wheels tested that were subjected to the action of quartz abrasive. Apart from determining the value of the abrasive wear, examinations of the magnetic phase content in the microstructure were carried out and plots of hardness of the surface layer as a function of the distance from the surface and microstructure of the materials were prepared. Based on the results, the following was found: an increase in the abrasive wear and a reduction in the hardness of the surface layer of chain wheels subjected to shot peening, as well as reduction of susceptibility to negative action of the shot for cast irons with the structure of upper ausferrite.

Słowa kluczowe

EN

ADI; shot peening; wear; abrasion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1985--1990
• Opis fizyczny: Bibliogr. 26 poz., rys., tab., wykr.

Twórcy

autor

Wieczorek A. N.

• Silesian University of Technology, Faculty of Mining and Geology, 2 Akademicka Str., 44-100 Gliwice, Poland

Bibliografia

• [1] M. Dolipski, P. Cheluszka, E. Remiorz, P. Sobota, Arch. Mining Sci. 60, 1, 25-38 (2015).
• [2] M. Dolipski, E. Remiorz, P. Sobota, Arch. Mining Sci. 57, 4, 1101-1119 (2012).
• [3] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Archives of Metallurgy and Materials 57 (4), 987-993 (2012).
• [4] S. F. Ścieszka, W. Grzegorzek, M. Żołnierz, Journal of Achievements in Materials and Manufacturing A.N. Wieczorek, Key Engineering Materials 674, 201-206, (2016).
• [5] Wieczorek A. N., A report POIG.01.04.00-24-100/11, (Report no published), (2014).
• [6] K. L. Hayrynen, J. R. Keough, AFS Transactions, 187, 1-10, (2005).
• [7] A. Rimmer, W. Bromwich, Gießereie-Erfahrungsaustausch 7-8, 7-9 (2004).
• [8] A. Kochański, A. Krzyńska, T. Radziszewski, Archives of Foundry Engineering 14, 1, 55-58 (2014).
• [9] Kochański A., Krzyńska A., Chmielewski T., Stoliński A., Comparison of Austempered Ductile Iron and Manganese Steel Wearability, Archives of Foundry Engineering 15, 51-54, 2015
• [10] D. P. Townsend, E. V. Zaretsky, NASA Technical Paper 2047, 5-12, (1982).
• [11] D. P. Townsend, NASA Tech Report 91-C-0421992.
• [12] D. Kirk, ICSP-1, Paris, France 271-278, (1981).
• [13] A. Nakonieczny, Dynamic Surface Manufacture - Shot Peening (Dynamiczna powierzchniowa obróbka plastyczna kulowanie - shot peening). Wyd. Instytutu Mechaniki Precyzyjnej, Warszawa 2002.
• [14] A. Zammit, M. Mhaede, M. Grech, S. Abela, L. Wagner, Materials Science and Engineering: A, 545, 78-85 (2012).
• [15] A. S. Benam, S. Yazdani, B. Avishan, China Foundry 8, 3, 325-330 (2011).
• [16] M. Mhaede, K. M. Ibrahim, M. Wollmann, L. Wagner, ARABCAST 2008, Sharm El-Sheikh, Egypt.
• [17] D. Myszka, I. Pokorska, G. Mońka, Inżynieria Materiałowa 182, 4, 616–619 (2011).
• [18] H. Ohba, S. Matsuyama, T. Yamamoto, Tribology Transactions 45, 576-82, (2002).
• [19] V. K. Sharma, Journal of Heat Treating 3, 326-334, (1984).
• [20] A. Zammit, S. Abela, R. Michalczewski, M. Kalbarczyk, L. Wagner, M. Mhaede, R. Wan, M. Grech, Tribologia 4, 137-147 (2014).
• [21] M. Vrbka, I. Křupka, P. Svoboda, P. Šperka, T. Návrat, M. Hartl, J. Nohava,, Tribology International 44, 1726-1735, (2011).
• [22] J. L. Garin, R.L. Mannheim, Journal of Materials Processing Technology 143-144, 347-351, (2003).
• [23] M. Grech, J. M. Young, Cast Metals 8, 98-103 (1987).
• [24] M. Grech, P. Bowen, J. M. Young, 3rd World Conference on ADI, Chicago 338-374 (1991).
• [25] E. Dorazil, Foundry 160, 36-45 (1986).
• [26] V. Chawla, Uma Batra, D. Puri, A. Chawla, Journal of Minerals & Materials Characterization & Engineering 7, 307-316 (2008).

Uwagi

EN

The study was carried out as a part of the project "Innovative technology for production of tension members for transport systems with the use of cast materials", No. POIG.01.04.00-24-100/11.