Welding of mobile platform elements made of AHSS steel and a non-alloy steel

• Autorzy: Szczucka-Lasota Bożena , Węgrzyn Tomasz , Łazarz Bogusław , Jurek Adam

Identyfikatory

DOI

10.20858/sjsutst.2020.106.14

• Języki publikacji: EN

Abstrakty

EN

In the construction of mobile platforms, there is an increasing necessity to weld steels from the AHSS group (AHSS - Advanced High-Strength Steel) with low-alloy steels. This article verifies the possibility of obtaining accurate mixed welded joints from different grades of AHSS steel with S355J2 steel. The structure, as well as mechanical properties of the obtained welded joints, were thoroughly analysed.

Słowa kluczowe

EN

civil engineering; transport; mobile platforms; welding

PL

inżynieria lądowa; transport; platformy mobilne; spawanie

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 106
• Strony: 165--171
• Opis fizyczny: Bibliogr. 10 poz.

Twórcy

autor

Szczucka-Lasota Bożena

• Faculty of Transport, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Węgrzyn Tomasz

• Faculty of Transport, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Łazarz Bogusław

• Faculty of Transport, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Jurek Adam

• Novar Sp. z o. o. Gliwice, Gliwice, Poland

Bibliografia

• 1. Benato R., F. Dughiero, M. Forzan, A. Paolucci. 2002. “Proximity effect and magnetic field calculation in GIL and in isolated phase bus ducts”. IEEE Transactions on Magnetics 38(2): 781-784. DOI: https://doi.org/10.1109/20.996202.
• 2. Izairi N., F. Ajredini, A. Vevecka-Pfiftaj, P. Makreski, M.M. Ristova. 2018. “Microhardness evolution in relation to the cFigtalline microstructure of aluminum alloy AA3004”. Archives of Metallurgy Materials 63(3): 1101-1108. DOI: https://doi.org/10.24425/123782
• 3. Giles T.L., K. Oh-Ishi, A.P. Zhilyaev, S. Swami, M.W. Mahoney, T.R. McNelley. 2009. “The Effect of Friction Stir Processing on the Microstructure and Mechanical Properties of an Aluminum Lithium Alloy”. Metallurgical and Materials Transactions 40(1): 104-115. DOI: https://doi.org/10.1007/s11661-008-9698-8.
• 4. Hamilton C., S. Dymek, A. Węglowska, A. Pietras. “Numerical simulations for bobbin tool friction stir welding of aluminum 6082-T”. 2018. Archives of Metallurgy Materials 63(3): 1115-1123. DOI: https://doi.org/10.24425/123784.
• 5. Jambor M., F. Novy, M. Mician, L. Trsko, O. Bokuvka, F. Pastorek, D. Harmaniak. 2018. „Gas metal arc welding of thermo-mechanically controlled processed S960MC steel thin sheets with different welding parameters”. Komunikacie (Communications - Scientific Letters of the University of Zilina) 20(4): 29-35. ISSN: 1335-4205.
• 6. Spišák E., J. Majerníková, J. Slota. 2014. “Change of ears creation of AHSS steels after heat treatment of zinc coating”. Metalurgija 53(4): 473-476.
• 7. Hadryś D. 2015. “Impact load of welds after micro-jet cooling”. Archives of Metallurgy and Materials 60(4): 2525-2528. DOI: https://doi.org/10.1515/amm-2015-0409.
• 8. Jaewson L., A. Kamran, P. Jwo. 2011. “Modeling of failure mode of laser welds in lapshear speciments of HSLA steel sheets”. Engineering Fracture Mechanics 78(2): 347-396.
• 9. Celin R., J. Burja. 2018. “Effect of cooling rates on the weld heat affected zone coarse grain microstructure”. Metallurgical and Materials Engineering 24(1): 37-44. DOI: https://doi.org/10.30544/342.
• 10. Darabi J., K. Ekula. 2003. “Development of a chip-integrated micro cooling device”. Microelectronics Journal 34(11): 1067-1074. DOI: https://doi.org/10.1016/j.mejo.2003.09.010.