PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A Concept of a Self-Powering Heat Meter

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Koncepcja samo-zasilającego się licznika energii cieplnej
Języki publikacji
EN
Abstrakty
EN
In the paper a concept and a study of a self-powering solution for heat energy consumption measurement in home or industrial heating systems is presented. The batteryless heat meter, equipped with a wireless transceiver could constitute a long life completely autonomous device that would not need any servicing nor power sources replacement. The proposed thermoelectric generator attached to a heat source can provide single miliwatts of power when the temperature difference exceeds a few grades.
PL
W artykule przedstawiono koncepcję i studium rozwiązania samo-zasilającego się licznika energii cieplnej dla systemu ogrzewania mieszkań i/lub powierzchni przemysłowych. Miernik energii cieplnej pracuje bez baterii i wyposażony jest w bezprzewodowy system nadawczoodbiorczy system, który może pracować dostatecznie długo jako system autonomiczny nie wymagający serwisowania czy wymiany źródeł zasilających. Dołączony do źródła ciepła generator termoelektryczny może dostarczać mocy rzędu kilku miliwatów gdy różnica temperatur na grzejniku przekracza kilka stopni Celsjusza.
Rocznik
Strony
33--36
Opis fizyczny
Bibliogr. 9 poz., rys., wykr.
Twórcy
autor
  • AGH University of Science and Technology, Department of Electronics
autor
  • AGH University of Science and Technology, Department of Electronics
autor
  • AGH University of Science and Technology, Department of Electronics
  • AGH University of Science and Technology, Department of Electronics
autor
  • AGH University of Science and Technology, Department of Electronics
Bibliografia
  • [1] Cao L., Jiang W., Zhang Z. (2008) Networked wireless meter reading system based on ZigBee technology. Control and Decision Conference, 2008. CCDC 2008, Chinese, pp. 3455-3460
  • [2] Shao G., Hou J., Zou B., Wang Z. (2009) Research and development of non-magnetic heat meters based on ZigBee and GPRS. ICEMI '09. 9th International Conference on Electronic Measurement & Instruments, pp. 645-649
  • [3] Xie H. F., Chen Q. H., Wang P. (2012) Design of Wireless Heat Automatic Reading Meter Monitoring System. Advanced Materials Research, Vol. 488-489 , pp. 1717-1721
  • [4] Joseph A. D. (2005) Energy Harvesting Projects, Published by the IEEE CS and IEEE ComSoc, 1536-1268/05
  • [5] Raffaelle R. P., Underwood J., Scheiman D., Cowen J., Jenkins P., Hepp A. F., Harris J., Wilt D. M. (2000) Integrated solar power systems, Proc. Of the 28th IEEE Photovoltaic Specialists Conference, pp. 1370-1373
  • [6] Mateau L., Codrea C., Lucas N., Pollak M., Spies P. (2006) Energy Harvesting for Wireless Communication Systems Using Thermogenerators,http://www.iis.fraunhofer.de/fhg/Images/mateu_et_al_fv_dcis2006_tcm97-73301.pdf
  • [7] Ottman G. K., Hofmann H. F., Bhatt A. C., Lesieutre G. A. (2002) Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply, IEEE Transactions on Power Electronics, vol. 17, no. 5
  • [8] Dziurdzia P., Mirocha A. (2009) From Constant to Temperature Dependent Parameters Based Electrothermal Models of TEG, Proc. of the 16-th International Conference Mixed Design of Integrated Circuits and Systems, Łódź, Poland, 25-27 June 2009, pp. 555-559
  • [9] Dziurdzia P., Stepien J. (2011) Autonomous Wireless Link Powered with Harvested Heat Energy, COMCAS 2011, International IEEE Conference on Microwaves, Communications, Antennas and Electronic Systems, Tel Aviv, Israel, November 7-9
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e0172bd3-4f6e-4991-bc26-267631c49c37
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.