Enhanced aging resistance of poly(ε-caprolactone)/brewers’ spent grain composites

Hejna, Aleksander; Formela, Krzysztof; Barczewski, Mateusz; Kuang, Tairong; Saeb, Mohammad Reza

doi:10.14314/polimery.2022.1.1

Artykuł - szczegóły

Tytuł artykułu

Enhanced aging resistance of poly(ε-caprolactone)/brewers’ spent grain composites

Autorzy

Hejna Aleksander , Formela Krzysztof , Barczewski Mateusz , Kuang Tairong , Saeb Mohammad Reza

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.14314/polimery.2022.1.1

Warianty tytułu

Odporność starzeniowa kompozytów poli(ε-kaprolakton)/młóto browarniane

Języki publikacji

Abstrakty

The presented paper investigated the influence of the brewers’ spent grain (BSG) extrusion parameters on the photo-oxidative resistance of poly(ε-caprolactone)-based wood polymer composites. Filler samples characterized by the higher melanoidin content were more efficient in hindering of polymer degradation, inhibiting the decomposition of the polymer amorphous phase. As a result, deterioration of mechanical performance was limited, which was expressed by the higher values of aging factor for samples containing BSG extruded at higher temperatures.

W prezentowanej pracy zbadano wpływ parametrów wytłaczania młóta browarnianego na odporność fotooksydacyjną kompozytów polimerowo-drzewnych na osnowie poli(ε-kaprolaktonu). Próbki napełniaczy o wyższej zawartości melanoidyn skuteczniej spowalniały degradację polimeru, hamując dekompozycję fazy amorficznej polimeru. W efekcie, obserwowano wyższe wartości współczynnika starzenia dla próbek zawierających młóto browarniane wytłaczane w wyższej temperaturze, co oznacza ograniczone zmniejszenie właściwości mechanicznych.

Słowa kluczowe

brewers' spent grain aging resistance filler modification wood-polymer composites

młóto browarniane poli(ε-kaprolakton) kompozyty polimerowo-drzewne modyfikacja napełniacza odporność starzeniowa

Wydawca

Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej

Czasopismo

Polimery

Rocznik

2022

Tom

Vol. 67, nr 1

Strony

3--12

Opis fizyczny

Bibliogr. 50 poz., rys. kolor., wykr.

Twórcy

autor

Hejna Aleksander

ohejna12@gmail.com

Gdańsk University of Technology, Department of Polymer Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland

https://orcid.org/0000-0001-9125-6164

autor

Formela Krzysztof

Gdańsk University of Technology, Department of Polymer Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland

https://orcid.org/0000-0003-0867-9794

autor

Barczewski Mateusz

Poznan University of Technology, Institute of Materials Technology, Piotrowo 3, 61-138 Poznań, Poland

https://orcid.org/0000-0003-1451-6430

autor

Kuang Tairong

Zhejiang University of Technology, College of Material Science and Engineering, Hangzhou, 310014, China

https://orcid.org/0000-0003-4009-1720

autor

Saeb Mohammad Reza

Gdańsk University of Technology, Department of Polymer Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland

https://orcid.org/0000-0001-9907-9414

Bibliografia

[1] Tudor E.M., Scheriau C., Barbu M.C. et al.: Applied Sciences 2020, 10(16), 5594. https://doi.org/10.3390/app10165594
[2] Antov P., Krišt’ák L., Réh R. et al.: Polymers 2021, 13(4), 639. https://doi.org/10.3390/polym13040639
[3] Kristak L., Ruziak I., Tudor E.M. et al.: Polymers 2021, 13(14), 2287. https://doi.org/10.3390/polym13142287
[4] Hejna A., Korol J., Kosmela P. et al.: Polymers 2021, 13, 893. https://doi.org/10.3390/polym13060893
[5] Suárez L., Castellano J., Díaz S. et al.: Polymers 2021, 13, 2326. https://doi.org/10.3390/polym13142326
[6] Civancik-Uslu D., Ferrer L., Puig R. et al.: Science of the Total Environment 2018, 626, 927. https://doi.org/10.1016/j.scitotenv.2018.01.149
[7] Liikanen M., Grönman K., Deviatkin I. et al.: Journal of Cleaner Production. 2019, 225, 716. https://doi.org/10.1016/j.jclepro.2019.03.348
[8] Sommerhuber P.F., Wenker J.L., Rüter S., Krause A.: Resources, Conservation and Recycling 2017, 117, 235. https://doi.org/10.1016/j.resconrec.2016.10.012
[9] Hejna A.: Emergent Materials 2021, Online First. https://doi.org/10.1007/s42247-021-00304-4
[10] https://brewersofeurope.org/uploads/mycms-files/documents/publications/2020/european-beer-trends-2020.pdf (access date 01.12.2021)
[11] Sun C., Liu R., Ni K. et al.: Journal of Food Engineering 2016, 186, 69. https://doi.org/10.1016/j.jfoodeng.2016.03.002
[12] Silva G.G.D., Guilbert S., Rouau X.: Powder Technology 2011, 208(2), 266. https://doi.org/10.1016/j.powtec.2010.08.015
[13] Hejna A., Barczewski M., Skórczewska K. et al.: Journal of Cleaner Production. 2021, 285, 124839. https://doi.org/10.1016/j.jclepro.2020.124839
[14] Chibane L.B., Degraeve P., Ferhout H. et al.: Journal of the Science of Food and Agriculture 2018, 99, 1457. https://doi.org/10.1002/jsfa.9357
[15] Fărcaş A.C., Socaci S.A. et al.: Journal of Cereal Science 2015, 64, 34. https://doi.org/10.1016/j.jcs.2015.04.003
[16] Hejna A., Barczewski M., Kosmela P., Mysiukiewicz O.: Proceedings 2021, 69, 1. https://doi.org/10.3390/CGPM2020-07219
[17] Hejna A., Barczewski M., Kosmela P. et al.: Journal of Composites Science 2021, 5, 44. https://doi.org/10.3390/jcs5020044
[18] Revert A., Reig M., Seguí V.J. et al.: Polymer Composites 2017, 38(1), 40. https://doi.org/10.1002/pc.23558
[19] Pat. PL 430 449 (2019).
[20] Hejna A., Marć M., Kowalkowska-Zedler D. et al.: Polymers 2021, 13, 879. https://doi.org/10.3390/polym13060879
[21] Wang H.Y., Qian H., Yao W.R.: Food Chemistry 2011, 128(3), 573. https://doi.org/10.1016/j.foodchem.2011.03.075
[22] Hejna A.: “The melt flowability and tensile performance of poly(e-caprolactone)/brewers’ spent grain composites as a function of filler modification”, Materials from 8th International Scientific and Practical Conference “Science and Practice: Implementation to Modern Society”, Manchester, UK, December 26–28, 2020, p. 1544.
[23] Koenig M.F., Huang S.J.: Polymer 1995, 36(9), 1877. https://doi.org/10.1016/0032-3861(95)90934-T
[24] CIE Standard 15:2004, Technical Report, 3rd ed., Colorimetry, Vienna, 2004.
[25] Dadali G., Demirhan E., Özbek B.: Drying Technology 2007, 25, 1713. https://doi.org/10.1080/07373930701590988
[26] Hunt R.W.G.: “The Reproduction of Colour (6th ed.)”, Wiley, Chichester, UK 2004.
[27] Hejna A., Formela K., Saeb M.R.: Industrial Crops and Products 2015, 76, 725. https://doi.org/10.1016/j.indcrop.2015.07.049
[28] Hejna A., Piszcz-Karaś K., Filipowicz N. et al.: Science of the Total Environment 2018, 640-641, 1320. https://doi.org/10.1016/j.scitotenv.2018.05.385
[29] Hejna A.: Journal of Composites Science 2020, 4, 167. https://doi.org/10.3390/jcs4040167
[30] França D.C., Morais D.D., Bezerra E.B. et al.: Materials Research 2018, 21(5), e20170837. https://doi.org/10.1590/1980-5373-mr-2017-0837
[31] Martins-Franchetti S.M., Campos A., Egerton T.A., White J.R.: Journal of Materials Science 2007, 43(3), 1063. https://doi.org/10.1007/s10853-007-2210-9
[32] Bajsić E.G., Mijović B., Penava N.V. et al.: Journal of Applied Polymer Science 2016, 133(24), 43539. https://doi.org/10.1002/app.43539
[33] Tsuji H., Echizen Y., Nishimura Y.: Polymer Degradation and Stability 2006, 91(5), 1128. https://doi.org/10.1016/j.polymdegradstab.2005.07.007
[34] López-Rubio A., Lagaron J.M.: Polymer Degradation and Stability 2010, 95(11), 2162. https://doi.org/10.1016/j.polymdegradstab.2010.03.002
[35] Marzec A., Szadkowski B., Kuśmierek M. et al.: Polymer Testing 2020, 82, 106290. https://doi.org/10.1016/j.polymertesting.2019.106290
[36] Masek A., Cichosz S.: Polymers 2021, 13, 1677. https://doi.org/10.3390/polym13111677
[37] Massardier V., Louizi M.: Polímeros 2015, 25(6), 515. https://doi.org/10.1590/0104-1428.2006
[38] Kargin V.A., Sogolova T.I., Shaposhnikova T.K.: Polymer Science U.S.S.R. 1965, 7, 423. https://doi.org/10.1016/0032-3950(65)90076-6
[39] Hejna A.: Waste Management 2021, 121, 296. https://doi.org/10.1016/j.wasman.2020.12.018
[40] Mohsin G.F., Schmitt F.J., Kanzler C. et al.: Food Chemistry 2018, 245, 761. https://doi.org/10.1016/j.foodchem.2017.11.115
[41] Oracz J., Zyzelewicz D.: Antioxidants 2019, 8(11), 560. https://doi.org/10.3390/antiox8110560
[42] Lan X., Liu P., Xia S. et al.: Food Chemistry 2010, 120(4), 967. https://doi.org/10.1016/j.foodchem.2009.11.033
[43] Ji Y., Yang X., Ji Z. et al.: ACS Omega 2020, 5, 8572. https://doi.org/10.1021/acsomega.9b04421
[44] Cämmerer B., Kroh L.W.: Food Chemistry 1995, 53, 55. https://doi.org/10.1016/0308-8146(95)95786-6
[45] Sun Y., Lin L., Zhang P.: Industrial and Engineering Chemistry Research 2021, 60(9), 3495. https://doi.org/10.1021/acs.iecr.1c00026
[46] Igyor M., Ogbonna A., Palmer G.: Process Biochemistry 2001, 36(11), 1039. https://doi.org/10.1016/S0032-9592(00)00267-3
[47] Afoakwa E.O., Paterson A., Fowler M., Vieira J.: Journal of Food Engineering 2008, 87, 181. https://doi.org/10.1016/j.jfoodeng.2007.11.025
[48] Hejna A., Barczewski M., Kosmela P. et al.: Macedonian Journal of Chemistry and Chemical Engineering 2021, 40(1), 89. https://doi.org/10.20450/mjcce.2021.2236
[49] Berry B.W.: Journal of Food Science 1998, 63(5), 797. https://doi.org/10.1111/j.1365-2621.1998.tb17903.x
[50] Weatherall I.L., Coombs B.D.: Journal of Investigative Dermatology 1992, 99(4), 468. https://doi.org/10.1111/1523-1747.ep12616156

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-dfdadaf3-08a2-4bb6-ba96-fb6439f1235b