Optimization of Tribological Parameters of Pre-Positioned Wire Based Electron Beam Additive Manufactured Ti-6Al-4V Alloy

• Autorzy: Manjunath Anandan , Anandakrishnan V. , Ramachandra S. , Parthiban Kannan , Sathish S.

Identyfikatory

DOI

10.24425/amm.2022.137776

• Języki publikacji: EN

Abstrakty

EN

The versatile application of titanium alloy in the aerospace industry and it’s hard to machine characteristics focus towards the additive manufacturing. The Ti-6Al-4V alloy is manufactured using the electron beam source with a novel method of prepositioned titanium alloy wires. The tribology of the additive manufactured titanium alloy under dry sliding condition is experimented and analysed using Taguchi technique. The targeted objective of minimum tribological responses are attained with the identified optimal parameters as load - 9.81 N, sliding velocity - 3 m/s, sliding distance - 3000 m for minimum specific wear rate and load - 9.81 N, sliding velocity - 3 m/s, sliding distance - 1000 m for minimum coefficient of friction. Among the parameters tested, load is found to be the dominant factor on the tribology of additively manufactured titanium alloy. The morphological analysis on the worn surface and debris revealed the existence of abrasion, delamination and adhesion wear mechanisms. The increase in the load dominantly showed the appearance of delamination mechanism.

Słowa kluczowe

EN

additive manufacturing; dry sliding wear; titanium alloy; wear analysis; wear mechanisms

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 447--454
• Opis fizyczny: Bibliogr. 31 poz., fot., rys., tab.

Twórcy

autor

Manjunath Anandan

• Gas Turbine Research Establishment, Defence Research & Development Organization, Bangalore, Karnataka-560093, India

• https://orcid.org/0000-0002-3226-1411

autor

Anandakrishnan V.

• Department of Production Engineering, National Institute of Technology Tiruchirapalli, Tiruchirappalli - 620015, Tamil Nadu, India

• https://orcid.org/0000-0001-9851-1738

autor

Ramachandra S.

• Gas Turbine Research Establishment, Defence Research & Development Organization, Bangalore, Karnataka-560093, India

• https://orcid.org/0000-0002-2161-6889

autor

Parthiban Kannan

• Gas Turbine Research Establishment, Defence Research & Development Organization, Bangalore, Karnataka-560093, India

• https://orcid.org/0000-0003-2602-5508

autor

Sathish S.

• Department of Mechatronics Engineering, K. S. Rangasamy College of Technology, Tiruchengode, Namakkal - 637215, Tamil Nadu, India

• https://orcid.org/0000-0003-4561-1297

Bibliografia

• [1] A. Eakambaram, M.A. Xavior, Arch. Metall. Mater. 64, 1541-1548 (2019). DOI: https://doi.org/10.24425/amm.2019.130124
• [2] D.A. Angel, T. Miko, M. Benke, Z. Gacsi, Arch. Metall. Mater. 65, 515-519 (2020). DOI: https://doi.org/10.24425/amm.2020.132788
• [3] A. Woźniak, O. Bialas, M. Adamiak, Arch. Metall. Mater. 65, 735-741 (2020). DOI: https://doi.org/10.24425/amm.2020.132813
• [4] M. Elguerri, Tec. Ital. J. Eng. Sci. 64, 216-224 (2020). DOI: https://doi.org/10.18280/ti-ijes.642-414
• [5] S. Dwivedi, S. Chauhan, Tec. Ital. J. Eng. Sci. 64, 259-264 (2020). DOI: https://doi.org/10.18280/ti-ijes.642-420
• [6] ISO/ASTM. 52900:2015, ASTM Int. 1-9 (2015). DOI: https://doi.org/10.1520/ISOASTM52900-15
• [7] S.M. Kelly, S.L. Kampe, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 35 A, 1869-1879 (2004). DOI: https://doi.org/10.1007/s11661-004-0095-7
• [8] L. Thijs, F. Verhaeghe, T. Craeghs, J. Van Humbeeck, J.P. Kruth, Acta Mater. 58, 3303-3312 (2010). DOI: https://doi.org/10.1016/j.actamat.2010.02.004
• [9] F. Verhaeghe, T. Craeghs, J. Heulens, L. Pandelaers, Acta Mater. 57, 6006-6012 (2009). DOI: https://doi.org/10.1016/j.actamat.2009.08.027
• [10] D. Bourell, J.P. Kruth, M. Leu, G. Levy, D. Rosen, A.M. Beese, A. Clare, CIRP Ann. - Manuf. Technol. 66, 659-681 (2017). DOI: https://doi.org/10.1016/j.cirp.2017.05.009
• [11] A. Manjunath, V. Anandakrishnan, S. Ramachandra, K. Parthiban, Mater. Today Proc. 21, 766-772 (2019). DOI: https://doi.org/10.1016/j.matpr.2019.06.727
• [12] J. Fuchs, C. Schneider, N. Enzinger, Weld. World. 62, 267-275 (2018). DOI: https://doi.org/10.1007/s40194-017-0537-7
• [13] Q. Wu, J. Lu, C. Liu, X. Shi, Q. Ma, S. Tang, H. Fan, S. Ma, Mater. Manuf. Process. 32, 1881-1886 (2017). DOI: https://doi.org/10.1080/10426914.2017.1364860.
• [14] M. Weglowski, Trends Civ. Eng. Its Archit. 1, 25-26 (2018). DOI: https://doi.org/10.32474/tceia.2018.01.000106
• [15] P. Wanjara, K. Watanabe, C. De Formanoir, Q. Yang, C. Bescond, S. Godet, M. Brochu, K. Nezaki, J. Gholipour, P. Patnaik, Adv. Mater. Sci. Eng. (2019). DOI: https://doi.org/10.1155/2019/3979471
• [16] M.D. Sharma, R. Sehgal, Ind. Lubr. Tribol. 66, 174-183 (2014). DOI: https://doi.org/10.1108/ILT-10-2011-0079
• [17] D. Kumar, K.B. Deepak, S.M. Muzakkir, M.F. Wani, K.P. Lijesh, Tribol. - Mater. Surfaces Interfaces. 12, 137-143 (2018). DOI: https://doi.org/10.1080/17515831.2018.1482676
• [18] X.X. Li, Y. Zhou, X.L. Ji, Y.X. Li, S.Q. Wang, Tribol. Int. 91, 228-234 (2015). doi:10.1016/j.triboint.2015.02.009
• [19] A. Molinari, G. Straffelini, B. Tesi, T. Bacci, Wear. 208, 105-112 (1997). DOI: https://doi.org/10.1016/S0043-1648(96)07454-6
• [20] Y. Zhu, X. Chen, J. Zou, H. Yang, Wear. 368-369, 485-495 (2016). DOI: https://doi.org/10.1016/j.wear.2016.09.020
• [21] M.O. Alam, A.S.M.A. Haseeb, Tribol. Int. 35, 357-362 (2002). DOI: https://doi.org/10.1016/S0301-679X(02)00015-4
• [22] Q. An, L.J. Huang, Y. Bao, R. Zhang, S. Jiang, L. Geng, M. Xiao, Tribol. Int. 121, 252-259 (2018). DOI: https://doi.org/10.1016/j.triboint.2018.01.053
• [23] M. Dutt Sharma, R. Sehgal, Tribol. Online. 7, 87-95 (2012). DOI: https://doi.org/10.2474/trol.7.87.
• [24] Q. Ming, Z. Yong-zhen, Y. Jian-heng, Z. Jun, Mater. Sci. Eng. A. 434, 71-75 (2006). DOI: https://doi.org/10.1016/j.msea.2006.07.043
• [25] G.D. Revankar, R. Shetty, S.S. Rao, V.N. Gaitonde, J. Mater. Res. Technol. 6, 13-32 (2017). DOI: https://doi.org/10.1016/j.jmrt.2016.03.007
• [26] S. Sathish, V. Anandakrishnan, G. Manoj, Mater. Today Proc. 21, 492-496 (2020). DOI: https://doi.org/10.1016/j.matpr.2019.06.643
• [27] S. Sathish, V. Anandakrishnan, G. Manoj, Ind. Lubr. Tribol. 72, 503-508 (2019). DOI: https://doi.org/10.1108/ILT-08-2019-0326
• [28] S. Sathish, V. Anandakrishnan, S. Sankaranarayanan, M. Gupta, J. Tribol. 23, 76-89 (2019).
• [29] J. Matthew J. Donachie, Titanium - A Techinacal Guide, (2000). DOI: https://doi.org/10.5772/1844.
• [30] C. Saravanan, V. Subramanian, K. Anandakrishnan, S. Sathish, Ind. Lubr. Tribol. 70, 1066-1071 (2018). DOI: https://doi.org/10.1108/ILT-10-2017-0312
• [31] M. Ananda Jothi, S. Ramanathan, Mater. Sci. Forum. 830-831, 333-336 (2015). DOI: https://doi.org/10.4028/www.scientific.net/MSF.830-831.333

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).