Tractor decelometric trials by application of the ecological hydraulic oil

• Autorzy: Tkáč Z. , Kosiba J. , Jablonický J. , Šinský V. , Shchur T.
• Języki publikacji: EN

Abstrakty

EN

In this article, there is resumed the accomplished impact analysis of biodegradable tractor oil HYDROS UNI application in gear - hydraulic circuit of the tractor Zetor Proxima 7441. This analysis was performed by comparative testing with standard mineral oil PP 80 on the basis of decelometric trials. Decelometric trials were carried out with measuring device XL - MeterTM Pro Gamma. The measurements were executed by the 3rd and the 4th unreduced gear. The results show that the oil HYDROS UNI does not affect decelometric characteristics of the tractor Zetor Proxima 7441.

Słowa kluczowe

EN

deceleration; characteristics; tractor

• Wydawca: Polish Academy of Sciences, Branch in Lublin
• Czasopismo: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
• Rocznik: 2016
• Tom: Vol. 5, No 3
• Strony: 171--175
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr., wz.

Twórcy

autor

Tkáč Z.

• Slovak University of Agriculture

autor

Kosiba J.

• Slovak University of Agriculture

autor

Jablonický J.

• Slovak University of Agriculture

autor

Šinský V.

• Slovak University of Agriculture

autor

Shchur T.

• Lviv National Agricultural University, St. Vladimir the Great, 1, Dublyany, Ukraine

Bibliografia

• 1. Drlička, R., Žarnovský, J., Mikuš, R., Kováč, I., Korenko, M. 2013. Hard machining of agricultural machines parts. In Research in agricultural engineering. 2013, vol. 59, special iss., s. 542-548.
• 2. Jakob, K., Theissen, H. 2006. Bio-based Oils in Hydraulics – Experience from Five Years of Market Introduction in Germany. Institute for Fluid Power Drives and Controls (IFAS), RWTH Aschen University, Germany.
• 3. Korenko, M., Beloev, H., Kaplík, P. 2013 Quality control, using PPAP method : scientific monograph. 1. vol. Ruse : Angel Kanchev University of Ruse. 139 s.
• 4. Kročko, V., Žitňanský J., Drlička, R., Polák, P., Korenko, M. 2012. Environmental impact of cutting fluids to the quality of surface finish in turning. In MendelTech 2012. Brno : Mendel University in Brno.
• 5. Kučera, M., Rédl J. 2008. Vplyv podmienok experimentu na tribologické vlastnosti vybraných materiálov (Effects of experimental conditions on tribologic properties of selected materials). Acta technologica agriculturae, 1: 98-104.
• 6. Majdan, R., Cvíčela, P., Bohát, M., Ivanišová, K. 2008. The observation of hydrostatic pump deterioration during the durability test according to hydraulic fluids contamination. In X. International conference of young scientists 2008. Prague : Czech University of Life Sciences Prague, s. 147-153.
• 7. Majdan, R., Stančík, B., Vitázek, I., Abrahám, R., Tóth, F., Štulajter, I. 2012. The influence of biodegradable fluids on deterioration of the hydraulic pumps elements. In Naučni trudove : zemedelska technika i technologii, agrarni nauki i veterinarna medicina, remont i nadeždnosť : zemedelska technika i technologii, agrarnye nauki i veterinarnaja medicina, remont i nadežnosť. Tom. 51, seria 1.1, s. 187-191.
• 8. Mosolygó, E., Jánošík, Š., 2008. Lubricants based on renewable resources. In: Interfaces’08. Sopron : Slovnaft a.s., Member of the MOL Group, 2008, pp. 111-120.
• 9. Shick, D. 2008. Compatibility testing of biodegradable hydraulic fluids [online]. Available at: http://www.msoe.edu/academics/research_centers/reu/pdf/2008/Compatibility% 20Testing%20of%20Biodegradable%20Hydraulic%20Fluids.pdf [Accessed: 03-02-2012]
• 10. Tkáč, Z., Majdan, R., Tulík, J., Kosiba, J. 2012. Study of ecological fluid properties under operational conditions of tractors. In: TEAM. Osijek-Baranja : University of Josip Juraj Strossmayer, vol. 4, no. 1, pp. 295-298.
• 11. Tulík, J., Hujo, Ľ., Stančík, B., Ševčík, P. 2013. Research of new ecological synthetic oil-based fluid. In Journal of Central European Agriculture. Vol. 14, no. 4, p. 1384-1393.
• 12. PRÍSTAVKA, Miroslav - BUJNA, Marián - KORENKO, Maroš. Reliability monitoring of grain harvester in operating conditions. In Journal of Central European Agriculture online. ISSN 1332-9049, 2013, vol. 14, no. 4, s. 1436-1443, online. Dostupné na internete: <http://jcea.agrhr/articles/774433_RELIABILITY_MONITORING_OF_GRAIN_HARVESTER_IN_OPERATING_CONDITIONS__en.pdf>.
• 13. DRLIČKA, Róbert - ŽARNOVSKÝ, Jozef - MIKUŠ, Rastislav - KOVÁČ, Ivan - KORENKO, Maroš. Hard machining of agricultural machines parts. In Research in agricultural engineering. ISSN 1212-9151, 2013, vol. 59, special iss., s. 542-548.
• 14. KIELBASA, Pawel - KORENKO, Maroš. Vplyv pracovného odporu stroja na veľkosť preklzu hnacích kolies traktora. In Acta technologica agriculturae. ISSN 1335-2555, 2006, roč. 9, č. 2, s. 44-47.
• 15. FRANČÁK, Ján - MIHINA, Štefan - ANGELOVIČ, Marek - GÁLIK, Roman - KORENKO, Maroš - SIMONÍK, Ján - BOTTO, Ľubomír - JOBBÁGY, Ján - ŽITŇÁK, Miroslav. Technika v agrokomplexe. 1. vyd. Nitra : Slovenská poľnohospodárska univerzita v Nitre, 2010. 198 s. ISBN 978-80-552-0412-3.
• 16. KORENKO, Maroš - FRANČÁK, Ján. Vplyv technických a technologických faktorov na kvalitu sadenia zemiakov : vedecká monografia. 1. vyd. Nitra : Slovenská poľnohospodárska univerzita v Nitre, 2009. 122 s. ISBN 978-80-552-0175-7

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.