Selecting Parameters for Bending of Tubes Made of the X70 Steel by Numerical Modelling

• Autorzy: Junak G. , Cieśla M. , Tomczak J.

Identyfikatory

DOI

10.1515/amm-2017-0343

• Języki publikacji: EN

Abstrakty

EN

This paper addresses numerical analyses of the bending process for tubes made of the X70 steel used in gas distribution pipe-lines. The calculations performed under the research involved simulation of processes of tube bending with local induction heating. The purpose of these calculations was to establish process parameters making it possible to develop pipe bends of geometric features conforming with requirements of the applicable standards. While performing the calculations, an analysis was conducted to determine the probability of occurrence of folding and fractures according to the Cockcroft-Latham criterion.

Słowa kluczowe

EN

tube bending; numerical modelling; X70 steel; gas distribution pipelines

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2339--2342
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr., wzory

Twórcy

autor

Junak G.

• Silesian University of Technology, Institute of Metals Technology, Katowice, Poland

autor

Cieśla M.

• Silesian University of Technology, Institute of Metals Technology, Katowice, Poland

autor

Tomczak J.

• Lublin University of Technology, Department of Computer Modeling and Metal Forming Technologies, Poland

Bibliografia

• [1] W. Kubiński, M. Kuczera, Obróbka Plastyczna Metali 4, 23-36 (2004).
• [2] J. Pacanowski, Z. Kosowicz, Rudy i Metale Nieżelazne 41 (10), 419-423 (1996).
• [3] M. Cieśla, K. Mutwil, G. Junak, Fatigue Failure and Fracture Mechanics XXVI: Proceedings of the XXVI Polish National Conference on Fatigue Failure and Fracture Mechanics, Source: AIP Conf. Proc. 1780, 020001 (2016).
• [4] PN-EN 10216-2, Seamless steel tubes for pressure purposes.
• [5] PN-EN 13480-3. Industrial metal pipelines. Design and calculations.
• [6] PN-EN 12952-5, Water-tube boilers and auxiliary installations.
• [7] PN-EN-ISO 3183, Petroleum and natural gas industries. Steel pipe for pipeline transportation systems.
• [8] M. Cieśla, K. Mutwil, J. Tomczak, T. Kawała, Solid State Phenomena 246, 313-216 (2016).
• [9] Z. Hu, J. Q. Li, Journal of Materials Processing Technology 91, 75-79 1999.
• [10] M. Cieśla, J. Tomczak, E. Hadasik, R. Findziński, T. Kawała, Hutnik, wiadomości hutnicze 81 (7), 487-491 (2014).
• [11] J. Tomczak, Z. Pater, T. Bulazk, Archives of Civil and Mechanical Engineering 14 (1), 104-113 (2014).
• [12] Z. Pater, J. Tomczak, J. Bartnicki, M. R. Lovell, P. L. Menezes, International Journal of Machine Tools & Manufacture 67, 1-7 (2013).
• [13] A. Stefanik, H. Dyja, S. Mróz, Archives of Metallurgy and Materials 56 (2), 545-549 (2011).
• [14] A. Gontarz, J. Piesiak, Obróbka plastyczna metali XXI (4), (2010).

Uwagi

EN

This work was supported by Association of Graduates of the Faculty of Metallurgy and Materials Engineering of Silesian University of Technology, Poland.

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).