PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of Groove shape on the Mechanical Properties of Welded Commercial Steel

Autorzy
Treść / Zawartość
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Manufacturers always seek for quality and effective welding to stay competitive in the market. There is a continuous demand for a quick and efficient manufacturing set ups for new products. GMAW is among the welding processes that is wieldy used in the industry. Welding factors such as welding voltage, welding current, gas flow rate, filler wire size and welding speed play a significant role in determining the welding quality. Taguchi design uses optimization technique for the process of experimentation as an effort to improve productivity and enhance product quality. This study discusses the welding of commercial steel welded using GMAW. The welding was controlled by welding current, welding speed and groove shape to test their influence on the welding strength, tensile strength and hardness. X groove shape welding has obtained lower tensile strength and hardness than V groove shape as did higher welding current and lower welding speed. The results concluded that welding current welding had the highest influence on tensile strength and hardness of the welding, followed by groove shape, while the welding speed had the minimum influence. The optimized combination of welding factors is 170 A, V groove shape and 150 mm/min.
Rocznik
Tom
Strony
49--56
Opis fizyczny
Bibliogr. 23 poz., il., tab.
Twórcy
  • College of Mechanical Engineering Technology, Benghazi, Libya
Bibliografia
  • [1] Chavda S.P., Desai J.V., Patel T.M., Ksv L., A Review on Parametric optimization of MIG Welding for Medium Carbon Steel using FEA-DOE Hybrid Modeling. International Journal for Scientific Research & Development, 2013, Vol. 1(9), 3-6.
  • [2] Ramadan N., Boghdadi A., Parametric Optimization of TIG Welding Influence On Tensile Strength of Dissimilar Metals SS-304 And Low Carbon Steel by Using Taguchi Approach. American Journal of Engineering Research, 2020, Vol. 9(9), 7-14.
  • [3] Shah J., Patel G., Makwana J., Optimization and Prediction of MIG Welding Process Parameters Using ANN. International Journal of Engineering. Development and Research, 2017, Vol. 5, 1487-1492.
  • [4] Durgutlu A., Experimental investigation of the effect of hydrogen in argon as a shielding gas on TIG welding of austenitic stainless steel. Materials and Design, 2004, Vol. 25, 19-23. https://doi.org/10.1016/j.matdes.2003.07.004
  • [5] Anand K. R., Mittal V., Scholar P. G., Parameteric Optimization of Tig Welding On Joint of Stainless Steel (316) & Mild Steel Using Taguchi Technique, International Research Journal of Engineering and Technology, 2017, Vol 4(5), 366-370.
  • [6] Cleiton C.S., Hélio C.M., Hosiberto B. de Sant’Ana, Jesualdo P.F., Austenitic and ferritic stainless steel dissimilar weld metal evaluation for the applications as-coating in the petroleum processing equipment, Materials and Design, 2013, Vol. 47, 1-8. https://doi.org/10.1016/j.matdes.2012.11.048
  • [7] Esme U., Bayramoglu M., Kazancoglu Y., Ozgun S., Optimization of weld bead geometry in TIG welding process using grey relation analysis and Taguchi method. Materiali in tehnologije, 2009, Vol. 43(3), 143-149.
  • [8] Vikesh., Randhawa J., Suri N.M., Effect of A-TIG welding process parameters on penetration in mild steel plates. International Journal of Mechanical and Industrial Engineering, 2014, Vol. 4, https://doi.org/10.47893/IJMIE.2014.1188
  • [9] Cary H.B., Helzer S., Modern welding technology, 6rd ed., Pearson: US, 2004.
  • [10] Venkatasubramanian G., Mideen A.S., Jha A.K., Microstructural Characterisation and Corrosion Behaviour of Top Surface of Tig Welded 2219-T87 Aluminium Alloy. International Journal of Engineering Science and Technology, 2013, Vol. 5(3), 624.
  • [11] Singh B., Kumar S., Swamy K., Ravella U.K., Microstructure characteristics & mechanical properties of dissimilar tig weld between stainless steel and mild steel. International Journal of Mechanical Engineering and Technology, 2017, Vol. 8(7), 1739-1747.
  • [12] Abima C.S., Akinlabi S.A., Madushele N., Fatoba O.S., Akinlabi E.T., Experimental Investigation of TIG-welded AISI 1008 Carbon Steel. {IOP} Conference Series: Materials Science and Engineering, 2021, Vol. 1107(1), 12036. https://doi.org/10.1088/1757-899x/1107/1/012036
  • [13] Parmar G., Pathak A.K., Khan M.R.A., Study of Mechanical Properties of MIG Welding and TIG Welding Welded Dissimilar Joint of Mild Steel and 304 Austenitic Stainless Steel. International Research Journal of Engineering and Technology, 2021, Vol. 8(4), 2867-2876.
  • [14] Tanco M., Viles E., Ilzarbe L., Álvarez M.J., Manufacturing industries need Design of Experiments (DoE), In Proceedings of the World Congress on Engineering, 2007, London, UK, 2-4 July.
  • [15] Hamzaçebi C. Taguchi Method as a Robust Design Tool. In Quality Control - Intelligent Manufacturing, Robust Design and Charts. Li, P., Pereira P.A.R., Navas, H., IntechOpen: London, UK, 2020. https://doi.org/10.5772/intechopen.94908
  • [16] Arjun G., Atheena J. R., Nithin V., Vyshakh P., Mebin T.K., Valder J., Rijesh M., Welding Feasibility of Copper and Mild Steel Using TIG Welding, In Proc. Of the Nat. Conference on Futuristic Advancements in Mechanical Engineering (FAME-2K16), 2016, Thalassery, India, 8-10 August.
  • [17] American Society for Testing and Materials. Standard test methods for tension testing of metallic materials, ASTM International, 2021. https://doi.org/10.1520/E0008-04
  • [18] World Material. EN 1.0038 Steel S235JR Material Equivalent, Properties, Composition. Available Online: https://www.theworldmaterial.com/1-0038-steel-s235jr-material/ (Accessed on 7 August 2022).
  • [19] Ratiwi Y.R., Wibowo, S.S., The Effect of Electrode and Number of Passes on Hardness and Micro Structure of Shielded Metal Arc Welding The Effect of Electrode and Number of Passes on Hardness and Micro Structure of Shielded Metal Arc Welding, IOP Conference Series: Materials Science and Engineering. IOP Publishing, Vol. 515(1), 2019, 012072. https://doi.org/10.1088/1757-899x/515/1/012072
  • [20] ISO, Mettalic Materials - Conversion of Hardness Table, ISO 18265, 2013. https://www.iso.org/obp/ui/#iso:std:iso:18265:ed-2:v1:en
  • [21] Tawfeek, T., Study the Influence of Gas Metal Arc Welding Parameters on the Weld Metal and Heat Affected Zone Microstructures of Low Carbon Steel. International Journal of Engineering and Technology, 2017, Vol. 9(3), 2013-2019. https://10.21817/ijet/2017/v9i3/1709030272
  • [22] Jeet S., Barua A., Parida B., Sahoo B.B., Bagal, D.K., Multi-Objective Optimization of Welding Parameters in GMAW for Stainless Steel and Low Carbon Steel Using Hybrid RSM-TOPSIS-GA-SA Approach, International Journal of Technical Innovation in Modern Engineering & Science, 2018, Vol. 4, 683-692. https://ijtimes.com/IJTIMES/index.php/ijtimes/article/view/921
  • [23] Yadav, P.K., Abbas, M., Patel, S., Analysis of heat affected zone of mild steel specimen developed due to MIG welding, International Journal of Mechanical Engineering and Robotics Research, 2014, vol. 3(3), 399-404. http://www.ijmerr.com/show-124-447-1.html
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-deb722ff-8f36-4d62-bac3-1091117c8dba
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.