IT Systems in Aid of Welding Processes Quality Management in the Automotive Industry

• Autorzy: Restecka M. , Wolniak R.

Identyfikatory

DOI

10.1515/amm-2016-0288

• Języki publikacji: EN

Abstrakty

EN

The most important issue for the producers nowadays is to meet the requirements of customers, satisfying their perceived but also the unperceived needs. In order to control the quality of welding processes correctly one must have knowledge of welding drawings, symbols, designs of welded joints, welding procedures, requirements set in codes and standards, also have knowledge of the techniques of inspection and testing connected with the automotive industry. The article shows ways to increase quality in the industry through the use of robotization and computerization. Presented examples and application of IT systems in aid of welding processes quality management in the automotive industry.

Słowa kluczowe

EN

robotics; computer-aiding; CAE; welding; quality

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1785--1792
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr.

Twórcy

autor

Restecka M.

• Instytut Spawalnictwa, 16-18. Bł. Czesława Str., 44-100 Gliwice, Poland

autor

Wolniak R.

• The Silesian Technical University, 26. Roosvelta Str., 41-800 Zabrze, Poland

Bibliografia

• [1] S. Akaike, DENSO Corporation standarizes on ANSYS structural software to expedite global product development. Ansys Advantage 9, 10-12 (2015).
• [2] J. Bradac, Using welding simulations to predict deformations and distortions of complex car body parts with more welds. MTM Journal 1, 32-39 (2013).
• [3] H. Diab, H. Tabbara, A CAE tool for pavement design and management. Computer - Aided Enegineering Journal 8, 139-146 (1991).
• [4] X. Liu, M. Chao, X. Xia, Design of Automobile Body Welding Fixture. International Connference on Automobile and Traffic Science. Materials, Metallurgy Engineering. (2012).
• [5] T. C. Neugebauer, D. J. Perreault, Computer Aided optimization of DC/DC converters for automotive applications. Power Electronics. IEE Transactions on. 18, 775-783 (2003).
• [6] K. Pałucha, Wybrane problemy uruchamiania nowej produkcji. Zeszyty Naukowe Politechniki Śląskiej, seria: Organizacja i Zarządzanie, 2011.
• [7] W. Perret, R. Thater, U. Alber, C. Schwenk, M. Rethmeier, Approach to asses a fast welding simulation in an industrial environment – application for an automotive welded part. International Journal of Automotive Technology 12, 895-903 (2011).
• [8] D. Ralston, T. Munton, Computer Integrated Manufacturing. Computer - Aided Engineering Journal 4, 167-174 (2009).
• [9] M. Restecka, Robotyzacja - trend ogólnoświatowy. Biuletyn Instytutu Spawalnictwa 1, 41-46 (2015).
• [10] M. Restecka, Struktura zatrudnienia a ekonomia procesów spawalniczych. Przegląd Spawalnictwa 5, 78 - 82 (2015).
• [11] M. Restecka, Systemy informatyczne wspomagające prace spawalnicze. Biuletyn Instytutu Spawalnictwa 3, 31 - 40 (2015).
• [12] M. Restecka, W. Zeman, Innowacyjność producentów konstrukcji i wyrobów spawanych na przełomie lat 2012/2013 w oparciu o wyniki badań ankietowych, Instytut Spawalnictwa, 2013.
• [13] J. Stachów, Przełomowy rok w branży motoryzacyjnej, KS Automotive, 2013.
• [14] J. Uttrachi, Application: NASCAR Uses TIG Welding. Advanced Automotive Welding, 2012.
• [15] W. Zeman, Wprowadzenie do zagadnień ekonomiki procesów spawania. Materiały Szkoleniowe, 2014.
• [16] www.ifr.org