Compensation of systematic errors of damaged probe for on-machine measurement

• Autorzy: Wozniak A. , Jankowski M.

Identyfikatory

DOI

10.5604/01.3001.0010.8826

• Języki publikacji: EN

Abstrakty

EN

Spatial characteristic of triggering radius of the damaged probe for the CNC machine tools has been presented. In such case a clear distortion of the probe performance characteristic and a significant increase in probe errors have been observed. Then, to such a damaged probe, a variable speed correction method of systematic errors was used. By setting proper measurement speeds, varying for different measurement directions, errors of the probe can be significantly reduced.

Słowa kluczowe

EN

on-machine measurement; touch trigger probe; errors compensation

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2018
• Tom: Vol. 18, No. 1
• Strony: 88--94
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Wozniak A.

• Warsaw University of Technology, Faculty of Mechatronics, Institute of Metrology and Biomedical Engineering, Warsaw, Poland

autor

Jankowski M.

• Warsaw University of Technology, Faculty of Mechatronics, Institute of Metrology and Biomedical Engineering, Warsaw, Poland

Bibliografia

• [1] ERKAN T., MAYER J.R.R., DUPONT Y., 2011, Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact, Precision Engineering, 35/1, 116-125.
• [2] MAYER J.R.R., 2012, Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact, CIRP Annals – Manufacturing Technology, 61, 515-518.
• [3] IBARAKI S., IRITANI T., MATSUSHITA T., 2013, Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe, International Journal of Machine Tools and Manufacture, 68, 21-29.
• [4] JIANG Z., BAO S., ZHOU X., TANG X., ZHENG S., 2015, Identification of location errors by a touch-trigger probe on five-axis machine tools with a tilting head, International Journal of Advanced Manufacturing Technology, 81/1, 149-158.
• [5] MAYER J.R.R, RAHMAN M.M., ŁOŚ A., 2015, An uncalibrated cylindrical indigenous artefact for measuring inter-axis errors of a five-axis machine tool, CIRP Annals - Manufacturing Technology, 64/1, 487-490.
• [6] RAHMAN M.M., MAYER J.R.R., 2016, Calibration performance investigation of an uncalibrated indigenous artefact probing for five-axis machine tool, Journal of Machine Engineering, 16/1, 33-42.
• [7] CHO M., SEO T.I., KWON H.D., 2003, Integrated error compensation method using OMM system for profile milling operation, Journal of Materials Processing Technology, 136/1-3, 88-99.
• [8] CHOI J.P., MIN B.K., LEE S.J., 2004, Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system, Journal of Materials Processing Technology, 155-156, 2056-2064.
• [9] ZELENY J., JANDA M., 2009, Automatic on-machine measurement of complex parts, Modern Machinery Science Journal, 1, 92-95.
• [10] QIAN X.M., YE W.H., CHEN X.M., 2008, On-machine measurement for touch-trigger probes and its error compensation, Key Engineering Materials, 375-376, 558-563.
• [11] WOZNIAK A., JANKOWSKI M., 2017, Variable speed compensation method of errors of probes for CNC machine tools, Precision Engineering, 49, 316-321.
• [12] JANKOWSKI M., WOZNIAK A., BYSZEWSKI M., 2014, Machine tool probes testing using a moving inner hemispherical master artefact, Precision Engineering, 38/2, 421-427.
• [13] WOZNIAK A., JANKOWSKI M., 2016, Wireless communication influence on CNC machine tool probe metrological parameters, International Journal of Advanced Manufacturing Technology, 82/1, 535-542.
• [14] JANKOWSKI M., WOZNIAK A., 2016, Mechanical model of errors of probes for numerical controlled machine tools, Measurement, 77, 317-326.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).