An interference of High Frequency Series Resonant Inverter in domestic induction heater estimation in emission control using FEM

• Autorzy: Chakraborty A. , Royi D. , Sadhu P. K. , Ganguly A. , Banerjee A.
• Języki publikacji: EN

Abstrakty

EN

This work describes a new technology to calculate the magnetic field emission of a High Frequency Series Resonant Inverter in a domestic induction heater by means of computational simulations. The calculation is performed assuming normal operation conditions required to measure the magnetic field by means of a triple loop antenna. This triple loop antenna, also known as a van Veen & Bergervoet antenna, is generally employed to test compliance with emission regulations in the frequency range of band A and band B i.e. 5-55 kHz.

Słowa kluczowe

EN

FEM; finite element method; resonant inverter; induction heater; high frequency

PL

MES; metoda elementów skończonych; falownik rezonansowy; nagrzewnica indukcyjna; wysoka częstotliwość

• Wydawca: Institute of Heat Engineering, Warsaw University of Technology
• Czasopismo: Journal of Power Technologies
• Rocznik: 2017
• Tom: Vol. 97, nr 4
• Strony: 283--288
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Chakraborty A.

• Asansol Engineering College, Asansol-713305, West Bengal, India

autor

Royi D.

• Batanagar Institute of Engineering, Management & Science, Kolkata – 700141, West Bengal, India

autor

Sadhu P. K.

• Indian School of Mines, Dhanbad – 826004, Jharkhand, India

autor

Ganguly A.

• Batanagar Institute of Engineering, Management & Science, Kolkata – 700141, West Bengal, India

autor

Banerjee A.

• Indian School of Mines, Dhanbad – 826004, Jharkhand, India

Bibliografia

• [1] J. Acero, J. Burdio, L. Barragan, D. Navarro, R. Alonso, J. Garcia, F. Monterde, P. Hernandez, S. Llorente, I. Garde, The domestic induction heating appliance: An overview of recent research, in: 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, 2008.
• [2] C. Carretero, J. Acero, R. Alonso, J.M. Burdio, “Interference emission estimation of domestic induction cookers based on finite element simulation”, Spanish MICINN under Project TEC2010-19207, Project CSD2009-00046, and Project IPT-2011-1158-920000, by the DGAFSE, and by the Bosch and Siemens Home Appliances Group, 2011.
• [3] A. M. Syaifudin, S. Mukhopadhyay, P. Yu, Electromagnetic field computation using comsol multiphysics to evaluate the performance of novel interdigital sensors, in: Applied Electromagnetics Conference (AEMC), 2009, IEEE, 2009, pp. 1–4.
• [4] J. I. Artigas, I. Urriza, J. Acero, L. A. Barragan, D. Navarro, J. M. Burdio, Power measurement by output-current integration in series resonant inverters, IEEE Transactions on Industrial Electronics 56 (2) (2009) 559–567.
• [5] D. Savia, Induction heating of samples in vacuum systems, in: The Proceeding of the COMSOL Users conference, 2007.
• [6] D. Istardi, A. Triwinarko, Induction heating process design using comsol multiphysics software, TELKOMNIKA (Telecommunication Computing Electronics and Control) 9 (2) (2013) 327–334.
• [7] M. Jungwirth, D. Hofinger, Multiphysics modelling of high-frequency inductive devices, in: The Proceeding of the COMSOL Users conference, 2007.
• [8] A. Julegin, D. V., Coupled modelling of induction systems: heaters and power sources, HES-13 (2013) 237–243.
• [9] D. Puyal, C. Bernal, J. Burdio, I. Millan, J. Acero, A new dynamic electrical model of domestic induction heating loads, in: Applied Power Electronics Conference and Exposition, 2008. APEC 2008. Twenty- Third Annual IEEE, IEEE, 2008, pp. 409–414.
• [10] A. Boadi, Y. Tsuchida, T. Todaka, M. Enokizono, Designing of suitable construction of high-frequency induction heating coil by using finite-element method, IEEE Transactions on Magnetics 41 (10) (2005) 4048–4050.
• [11] T. A. Jankowski, D. P. Johnson, J. D. Jurney, J. E. Freer, L. M. Dougherty, S. A. Stout, Experimental observation and numerical prediction of induction heating in a graphite test article, in: The Proceeding of the COMSOL conference, 2009.
• [12] M. Fabbri, M. Forzan, S. Lupi, A. Morandi, P. L. Ribani, Experimental and numerical analysis of dc induction heating of aluminum billets, IEEE Transactions on Magnetics 45 (1) (2009) 192–200.
• [13] J. Zgraja, J. Bereza, Computer simulation of induction heating system with series inverter, COMPEL-The international journal for computation and mathematics in electrical and electronic engineering 22 (1) (2003) 48–57.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).