Utilization of Wallostonite/ Quasi Isotropic S2 Glass Fiber Doped in to Epoxy on Mechanical and Thermal Properties

• Autorzy: Reddy D.M. , Rakesh C.H. , Karthikeyan N. , Kumar M. A. , Nagaraju G.

Identyfikatory

DOI

10.18052/www.scipress.com/ILCPA.40.24

• Języki publikacji: EN

Abstrakty

EN

Study focused on the performance of injection moulded short Wallostonite filler and chopped glass fiber reinforced hybrid epoxy composites. Results showed that hybridization of glass fiber and Wallostonite was found to be comparable to that of epoxy glass fiber composites. Analysis of fiber length distribution in the composite and fracture surface was performed to study fiber breakage fracture mechanism. The simultaneous compounding of epoxy with two fillers was done to obtain a hybrid composite. The mechanical properties of hybrid, injection molded, chopped glass fiber/ Wallostonite/epoxy composites have been investigated by considering the effect of hybridization by these two fillers. This system is expected to have considerable mechanical properties. It has been found that the tensile, flexural, and impact properties of the filled epoxy were higher than those of unfilled epoxy. The hybrid effects of the tensile strength and modulus were studied by the rule of hybrid mixtures (RoHM) using the values of single fiber composites.

Słowa kluczowe

EN

Epoxy; Wallostonite; S2 glass fiber; characterization; DSC; TGA

• Wydawca: Przedsiębiorstwo Wydawnictw Naukowych "DARWIN"
• Czasopismo: International Letters of Chemistry, Physics and Astronomy
• Rocznik: 2015
• Tom: Vol. 40
• Strony: 24--35
• Opis fizyczny: Bibliogr. 42 poz., rys., tab.

Twórcy

autor

Reddy D.M.

• Department of Mechanical Engineering, Kasireddy Narayanreddy College of Engineering and Research, Abdullapurmet, Hayath Nagar, Hyderabad, Ranga Reddy, India

autor

Rakesh C.H.

• Department of Mechanical Engineering, Kasireddy Narayanreddy College of Engineering and Research, Abdullapurmet, Hayath Nagar, Hyderabad, Ranga Reddy, India

autor

Karthikeyan N.

• Department of Mechanical Engineering, Kasireddy Narayanreddy College of Engineering and Research, Abdullapurmet, Hayath Nagar, Hyderabad, Ranga Reddy, India

autor

Kumar M. A.

• Department of Mechanical Engineering, Dr. KV Subbareddy Engineering College, Kurnool, India

autor

Nagaraju G.

• Department of Electronics & Communication Engineering, Gates Institute of Technology, Gooty, Anantapuramu, India

Bibliografia

• [1] Ashok Kumar, M., Ramachandra Reddy, G., Ramesh, A., Nanjunda Reddy, BH., Vishnu Mahesh, K.R., Sanjeev Kumar, P. 2012. Performance of coconut shell particulate filled polyester composites. Pakistan Journal Scientific Industrial Research Scr. A Phys. Sci., 55(3): 142-148.
• [2] Ashok Kumar, M., Hemachandra Reddy, K., Mohana Reddy, Y.V., Ramachandra Reddy, G., Venkata Naidu, S.2010. Improvement of tensile and flexural properties in epoxy/clay nanocomposites reinforced with weave glass fiber reel. International Journal of Polymeric Materials, 59: 854-862.
• [3] Borum-Nicholas, L., Wilson Jr. O.C.2003. Surface modification of hydroxyapatite. Part I. Dodecyl alcohol. Biomaterials, 24: 3671-3679.
• [4] Barral, L., Cano, J., Lopez, J., Lopez-Bueno, I., Nogueira, P., Ramirez, C. 2000. Thermal properties of amine cured diglycidyl ether of bisphenol a epoxy blended with poly(ether imide). Thermochim. Acta., 344: 137-143.
• [5] Boccaccini, A.R., Maque,t V.2003. Bioresorbable and bioactive polymer- Bioglasss composites withtailored pore structure for tissue engineering applications. Compos. Sci. Technol., 63: 2417-2429.
• [6] Choi, D., Marra, K.G., Kumta, P.N.2004. Chemical synthesis of hydroxyapatite/ Poly(_-caprolactone) composites. Mater. Res. Bull., 39: 417-432.
• [7] Calandrelli, L., Immirzi, B., Malinconico, M., Volpe, M.G., Oliva, A., Della Ragione, F.2000. Preparation and characterisation of composites based on biodegradable polymers for ‘‘in vivo’’ application. Polymer, 41: 8027-8033.
• [8] Chakradhar, K.V.P., Venkata Subbaiah, K., Ashok Kumar, M., Ramachandra Reddy, G.2011. Epoxy/polyester blend nanocomposites: effect of nanoclay on mechanical, thermal and morphological properties. Malaysian Polymer Journal, 6(2): 109-118.
• [9] Fu, J.F., Shi, L.Y., Zhang, D.S., Zhong, Q.D., Chen, Y.2010. Effect of nanoparticles on the performance of thermally conductive epoxy adhesives. Polym. Eng. Sci., 50: 1809-1819.
• [10] Guo, J., Han-Xiong, H., Zhao-Ke, C.. Polymer Plastic Technology and Engineeing, 50(10) (2011) 1035-1039.
• [11] Hari Sankar, P., Hemacahndra Reddy, K., Mohana Reddy, Y.V., Ashok Kumar, M. Development & characterization of hybrid natural fiber reinforced polymer blended composites, International Letters of Natural Sciences 3 (2014) 7-13.
• [12] Liu, Q., Van Blitterswijk, C.A. 1997. A study on the grafting reaction of isocyanates withh ydroxyapatite particles. J. Biomed. Mater. Res., 40: 358-364.
• [13] Liu, Q., De Wijn, J.R., De Groot, K., Van Blitterswijk, C.A. 1998. Surface modification of nano-apatite by grafting organic polymer. Biomaterials, 19: 1067-1072.
• [14] Liu, Q., de Wijn, J.R., van Blitterswijk C.A.1998. Composite biomaterials with chemical bonding between hydroxyapatite filler particles and PEG/PBT copolymer matrix. J. Biomed. Mater. Res., 40: 490-497.
• [15] Mannan, K.M., Talukder, M.A.I. 1997. Characterization of raw delignified and blenched jute fibres by study of absorption of moisture and some mechanical properties. Polym., 38: 2493-2500.
• [16] Park, S.J., Kim, H.C., Lee, H.I., Suh, D.H. 2001. Thermal stability of imidized epoxy blends initiated by N-benzylpyrazinium hexafluoroantimonate salt. Macromolecules, 34: 7573-7575.
• [17] Song, Z., Li, Z., Yan-Ying, W., Yi, Z., Shi-Bo, G., Yu-Bao, L. 2011. Fabrication of hydroxyapatite/ethylene-vinyl acetate/polyamide 66 composite scaffolds by the injection-molding method. Polymer Plastic Technology and Engineering, 50(10): 1047-1054.
• [18] Varada Rajulu, A., Babu Rao, G., Lakshminarayana Reddy, R.2001. Miscibility of polycarbonate/epoxy resin in dichloromethane by viscosity, ultrasonic and refractive index methods. Journal of Polymer Materials, 23:234-240.
• [19] Varada Rajulu, A., Babu Rao, G. and Lakshminarayana Reddy, R.2000. Chemical resistance and tensile properties of epoxy/polymethylmethacrylate blend coated bamboo fibres. Indian Journal of Fiber and Textile Research, 25:295-297.
• [20] Varada Rajulu, A., Sanjeev Kumar, S.V., Babu Rao, G.2001. Tensile properties of glass roving’s / hydroxyl terminated polyester toughened epoxy composites. Journal of Reinforced Plastics & Composites, 22: 200-206.
• [21] Varada Rajulu, A., Ganga Devi, L., Babu Rao, G.2003. Miscibility studies of epoxy/unsaturated polyester resin blend in chloroform by viscosity, ultrasonic velocity, and refractive index methods. Journal of Applied Polymer Science, 89(11): 2970–2972.
• [22] Verrier, S., Blaker, J. J., Maquet, V., Hench, L.L., Boccaccini, A. R. 2004. PDLLA /Bioglasss composites for soft-tissue and hard – tissue engineering: an in vitro cell biology assessment. Biomaterials, 25: 3013-3021.
• [23] Wang, X.J., Li, Y., Wei, J., De Groot, K. 2002. Development of biomimetic nano-hydroxyapatite/poly (hexamethylene adipamide) composites. Biomaterials, 23: 4787-4791.
• [24] Wang, M., Bonfield, W. 2001. Chemically coupled hydroxyapatitepolyethylene composite: structure and properties. Biomater., 22: 1311-1320.
• [25] Wang, Q.F., Shi, W.F.2006. Kinetics study of thermal decomposition of epoxy resins containing flame retardant components. Polym. Degrad. Stab., 91: 1747-1754.
• [26] Raghu, K., Noorunnisa Khanam, P. and Venkata Naidu, S. (2007). Chemical Resistance Studies of Silk/Sisal Fiber-Reinforced Unsaturated Polyester-Based Hybrid Composites, Journal of Reinforced Plastics and Composites, DOI: 10.1177/0731684408097770 JRPC.
• [27] John, K. and Venkata Naidu, S. (2007). Chemical Resistance of Sisal/Glass Reinforced Unsaturated Polyester Hybrid Composites, J. Rein. Plast. Comp., 26: 33-38.
• [28] Padma Vathi, T. and Venkata Naidu, S. (1998). Chemical Resistance and Tensile Properties of Sisal/Glass Fibres, Indian Journal of Fibre and Textile Research, 23: 128-132.
• [29] Venkata Reddy, G., Shobha Rani, T., Chowdoji Rao, K. and Venkata Naidu, S. (2009). Composites Flexural, Compressive, and Interlaminar Shear Strength Properties of Kapok/Glass, Journal of Reinforced Plastics and Composites, 28: 1665-1677.
• [30] G. Venkata Reddy, S. Venkata Naidu and T. Shobha Rani Impact Properties of Kapok Based Unsaturated Polyester Hybrid Composites Journal of Reinforced Plastics and Composites, 27 (2008) 1789-1804.
• [31] G. Venkata Reddy, S. Venkata Naidu. Shobha Rani, Kapok/Glass Polyester Hybrid Composites: Tensile and Hardness Properties, Journal of Reinforced Plastics and Composites 27 (2008) 1775-1787.
• [32] Benjamin Dauda & S. Olutunde Oyadiji & Prasad Potluri, Characterising Mechanical Properties of Braided and Woven Textile Composite Beams, Appl Compos Mater 16 (2009) 15-31.
• [33] Ashok Kumar, M., Ramachandra Reddy, G., Siva Bharathi, Y., Venkata Naidu, S. and Naga Prasad Naidu, V. (2010). Frictional Coefficient, Hardness, Impact Strength and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites, Journal of Composite Materials, 46(26): 3195-3202.
• [34] Ashok Kumar, M., Ramachandra Reddy, G., Hemachandra Reddy, K., Venkata Mohana Reddy, Y., Ranga Reddy, P. and Subbarami Reddy, N. (2011). Fabrication and Performance of Hybrid Betel Nut (Areca catechu) Short Fibre/ Sansevieria cylindrica (Agavaceae) Polypropylene Composite, Indian Journal of Material Science 2011 (in press).
• [35] Ashok Kumar, M., Hemachandra Reddy, K., Ramachandra Reddy, G., Venkata Mohana Reddy, Y. and Subbarami Reddy, N. (2010). Tensile, Thermal Properties & Chemical Resistance of Epoxy/Hybrid Fibre Composites (Glass/Jute) Filled with Silica Powder, Indian Journal of Macromolecules, 6(2): 2010 (in press).
• [36] Mishra, S. C. and Aireddy, H. (2011). Evaluation of dielectric behavior of bio-waste reinforced polymer composite. Journal of Reinforced Plastics and Composites, 30(2): 134-141.
• [37] Dani Jagadesh, Varada Rajulu, A. and Guduri, B.R. Tensile Properties of Polycarbonate-Coated Natural Fabric Hildegardia populifolia. (2008). Journal of Reinforced Plastics and Technology, 27: 1833-1838.
• [38] Varada Rajulu, A. and Rama Devi, R. Compressive Properties of Ridge Gourd/Phenolic Composites and Ridge Gourd/Phenolic/Glass Hybrid Composites, Journal of Reinforced Composites & Plastics, 26: 1657-1664.
• [39] Jayaramudu, J., Obi Reddy, K., Uma Maheswari, C., Jeevan Prasad Reddy, D. and Varda Rajulu, A. (2009). Tensile Properties and Thermal Degradation Parameters of Polyalthia Cerasoides Natural Fabric Reinforcement, Journal of Reinforced Plastics and Composites, 28(18): 2177-2181.
• [40] Raghavendra Rao, H.,Varada Rajulu, A., Ramachandra Reddy, G., Hemachandra Reddy, K. (2010). Flexural and Compressive Properties of Bamboo and Glass Fiber-reinforced Epoxy Hybrid Composites, Journal of Reinforced Plastics and Composites, 29(10): 1446-1450.
• [41] Venkata Subba Reddy, E., Varada Rajulu, A., Hemachandra Reddy, K. and Ramachandra Reddy, G. (2010). Chemical Resistance and Tensile Properties of Glass and Bamboo Fibers Reinforced Polyester Hybrid Composites, Journal of Reinforced Plastics and Composites, 29(14): 2119-2123.
• [42] Sreenivasan V. S., Somasundaram S., Ravindran D., Manikandan V., Narayanasamy R., Materials & Design 32/1 (2011) 453-461.