Acoustic emission of corroded weldments during tensile test

• Autorzy: Sustr Michal , Zacal Jaroslav , Dostal Peter , Cerny Oldrich , Pristavka Miroslav , Dobrocky David , Gaspar Stefan , Pasko Jan

Identyfikatory

DOI

10.1515/mspe-2019-0033

• Języki publikacji: EN

Abstrakty

EN

The article deals with the use of acoustic emission to identify the formation of cracks during the mechanical loading in the corrosive attacked weldment S235JR+N. The experiment includes the methodology for continual record of emissive signals, data analysis and monitoring of material response to monitor mechanical stress effect in real time. There is possibility to observe response of corrosive degraded samples in real time during mechanical stress through the suitably designed methodology of detection, process and analysing of acoustic emission signals. It is possible to gain new information about processes rising inside the material by this way of data measurement. The signals of acoustic emission can be used as the way of identification for the micro cracks rising in the inner and also external structure of effortful materials.

Słowa kluczowe

EN

weld joint; hot-dip galvanising; corrosion; acoustic emission; protection

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2019
• Tom: nr 4 (27)
• Strony: 211--216
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Sustr Michal

• Mendel University in Brno Faculty of Agronomy, Department of Technology and Automobile Transport Zemedelska 1, 613 00 Brno, Czech Republic

autor

Zacal Jaroslav

• Mendel University in Brno Faculty of Agronomy, Department of Technology and Automobile Transport Zemedelska 1, 613 00 Brno, Czech Republic

autor

Dostal Peter

• Mendel University in Brno Faculty of Agronomy, Department of Technology and Automobile Transport Zemedelska 1, 613 00 Brno, Czech Republic

autor

Cerny Oldrich

• Mendel University in Brno Faculty of Agronomy, Department of Technology and Automobile Transport Zemedelska 1, 613 00 Brno, Czech Republic

autor

Pristavka Miroslav

• Slovak University of Agriculture in Nitra Faculty of Engineering, Department of Quality and Engineering Technologies Tr. A. Hlinku 2, 949 76 Nitra, Slovak Republic

autor

Dobrocky David

• University of Defence Faculty of Military Technology, Department of Engineer Technologies Kounicova 156/65, 662 10 Brno, Czech Republic

autor

Gaspar Stefan

• Technical University of Kosice Faculty of Manufacturing Technologies with a seat in Presov Sturova 31, 08001 Presov, Slovak Republic

autor

Pasko Jan

• Technical University of Kosice Faculty of Manufacturing Technologies with a seat in Presov Sturova 31, 08001 Presov, Slovak Republic

Bibliografia

• [1] P. Dostal, and P. Communeau, “Visualisation of Corrosion Acoustic Signals Using Quality Tools” Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis vol. 62, pp. 65-69, No. 3, 2014.
• [2] P. Dostal, M. Cerny, J. Lev, and D. Varner, “Proportional Monitoring of the Acoustic Emission in Crypto-conditions” Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 66, pp. 31-38, No. 5, 2011.
• [3] J. Cerny, and P. Dostal, “Adhesion of Zinc Hot-dip Coatings” Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 62, pp. 53-64, No. 1, 2014.
• [4] J. Votava, V. Kumbar, and P. Dostal, “Degradation Processes of Al-Zn Welded Joints” Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 62, pp. 571-578, No. 3, 2014.
• [5] S. Wang, D. Wang, J. Wang, H. Wang, G. Xu and J. Hong, “Research on Acoustic Emission Source Location Imaging in Aluminum Alloy Plate-type Structure” Journal of Testing and Evaluation, vol. 48, No. 4, 2020.
• [6] A. Mostafapour, S. Davooodi, and M. Ghareaghaji, “Acoustic Emission Source Location in Plates using Wavelet Analysis and Cross Time Frequency Spectrum” Ultrasonic, vol. 54, pp. 2055-2062, No. 8, 2014.
• [7] Y. Liu, B. J. Pang, R. Q. Chi and W. X. Cao, “Characteristic Analysis of the Hypervelocity impact Acoustic Emission S2 mode in Aluminum Plate” Journal of Astronautic, vol. 37, pp. 1482-1490 No. 12, 2016.
• [8] E. Tsangouri, G. Karaiskos, A. Deraemaeker, D. Van Hemelrijck, and D., Aggelis, “Assessment of Acoustic Emission Localization accuracy on Damaged and Healed Concrete” Construction and Building Materials, vol. 129, pp. 163-171, No. December, 2016.
• [9] M. Kacalova, J. Majernik, M. Kundratova, and T. Coranic,“Frekvenčná analýza vibrodiagnostického signálu prevodového mechanizmu” Management of Manufacturing Systems, pp. 66-72, 2017.
• [10] M. Kacalova, J. Majernik, M. Kundratova, and T. Coranic, “Dynamická analýza ozubenia” Management of Manufacturing Systems, pp. 62-65, 2017.
• [11] M. Kacalova, M. Kundratova, T. Coranic, and J. Majernik “Využitie CAE technológií pri pevnostnej kontrole výstupného hriadeľa kužeľového prevodu” Management of Manufacturing Systems, pp. 73-78, 2017
• [12] N. Godin, P. Reynaud, and G. Fantozzi, “Acoustic Emission and Durability of Composite Materials”, pp. 181, 2018.
• [13] G.S. Wuriti, T. Thomas, and S. Chattopadhyaya, “Prediction of Tensile Failure load for Maraging Steel Weldment by Acoustic Emission Technique” Lecture Notes in Mechanical Engineering, pp. 431-442, 2019.
• [14] E.G Na, “Evaluation of Sensitization and Corrosive Damages of the Weldment for SUS 316 Stainless Steel” Journal of Mechanical Science and Technology, vol. 27, pp. 2715-2719, No. September, 2013.
• [15] J. Yu, P. Ziehl, J. Caicedo, and F. Matta, “Acoustic Emission Monitoring and Fatigue Prediction of Steel Bridge Components” Proceedings of SPIE – The International Society for Optical Engineering, vol. 8694, 2013.
• [16] H. Roy, H.N. Bar, S. Sivaprasad, S. Tarafder, and K.K Ray,“ Acoustic Emission during Monotonic and Cyclic Fracture Toughness Tests of 304LN Weldments” International Journal of Pressure Vessels and Piping, vol. 87, pp. 543-549, No. 10, 2010.
• [17] E.G. Na, S.G Koch, and D.W Lee “AE Evaluation of Relationship between AE Signals and Fracture Mechanisms for the Weldment of Pressure Vessel Steel” Advanced Materials Research, vol. 24-25, pp. 1181-1186, 2007.
• [18] K. He, S. Bar, S. Xiao, and X.Li,“ Time-Frequency Characteristics of Acoustic Emission Signal for Monitoring of Welding Structural State using Stockwell Transform” Journal of the Acoustical Society of America, vol. 145, pp. 469-479, No. 1, 2019.
• [19] J. Mascenik, and S. Pavlenko,“ Innovative broad – Spectrum Testing and Monitoring of Belt Transmissions” MM Science Journal, vol. 2018, pp. 2706-2709, No. December, 2018.
• [20] J. Mascenik, “Monitoring of parameters directly influencing performance transfer by belt gear” MM Science Journal, vol. 2017, pp. 1959-1962, No. December, 2017.
• [21] S. Olejarova, J. Ruzbarsky, and T. Krenicky, “Vibrodiagnostic analysis” Springer Briefs in Applied Sciences and Technology, pp. 29-37, 2019.
• [22] S. Olejarova, J. Ruzbarsky, and T. Krenicky, “Assessment of measurement of vibration sizes” Springer Briefs in Applied Sciences and Technology, pp. 55-74, 2019.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).