Higher-order displacement, strain, and stress analyses of origami graphene auxetic metamaterial-reinforced cylindrical shell

Ntayeesh, Thaier J.; Arefi, Mohammad

doi:10.1007/s43452-024-00956-z

Artykuł - szczegóły

Tytuł artykułu

Higher-order displacement, strain, and stress analyses of origami graphene auxetic metamaterial-reinforced cylindrical shell

Autorzy

Ntayeesh Thaier J. , Arefi Mohammad

Wybrane pełne teksty z tego czasopisma

http://www.springer.com/journal/43452

Identyfikatory

DOI

10.1007/s43452-024-00956-z

Warianty tytułu

Języki publikacji

Abstrakty

In this new work, we will investigate the application of a higher-order shear deformable model for elastostatic higher-order displacement, strain, and stress analyses of a shear deformable cylindrical shell. The composite structure is assumed to be composed of a Cu-based matrix reinforced with foldable nanographene, in a thermal environment. The cylindrical shell is reinforced with graphene origami auxetic metamaterial subjected to mechanical and thermal loads. The constitutive relations are extended in thermal environment using three-dimensional Hooke's law where using the mathematical and statistical approach, the effective materials characteristics are experimentally derived as some modification coefficients of foldability, content of reinforcement, and thermal load. The principle of virtual work is used to derive governing equations taking thermal loading into consideration. One can arrive at a parametric analysis and a numerical result investigation through employing an analytical approach to explore elastostatic displacement/strain/stress along the radial coordinate with changes of thermal loads, folding, content characteristics, and other parameters.

Słowa kluczowe

graphene origami copper matrix volume fraction folding degree shear deformable auxetic metamaterial

matryca miedziana ułamek objętościowy ścinanie

Wydawca

Springer
Wrocław University of Science and Technology

Czasopismo

Archives of Civil and Mechanical Engineering

Rocznik

2024

Tom

Vol. 24, no. 3

Strony

art. no. e149, 2024

Opis fizyczny

Bibliogr. 91 poz., rys., wykr.

Twórcy

autor

Ntayeesh Thaier J.

thaier-aljabbery@coeng.uobaghdad.edu.iq

Faculty of Mechanical Engineering, College of Engineering, University of Baghdad, Baghdad 10071, Iraq

autor

Arefi Mohammad

arefi63@gmail.com

Faculty of Mechanical Engineering, Department of Solid Mechanics, University of Kashan, Kashan 87317-51167, Iran

https://orcid.org/0000-0002-5037-7813

Bibliografia

1. Al-Furjan MSH, Hatami A, Habibi M, Shan L, Tounsi A. On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method. Compos Struct. 2021;257: 113150.
2. Kholdi M, Saeedi S, Zargar Moradi SA, et al. A successive approximation method for thermo-elasto-plastic analysis of arein forced functionally graded rotating disc. Arch Civ Mech Eng.2022;22:2.
3. Saeedi S, Kholdi M, Loghman A, et al. Axisymmetric thermoelastic analysis of long cylinder made of FGM reinforced by aluminum and silicone carbide using DQM. Arch Civ Mech Eng.2022;22:48.
4. Chen F, Chen J, Duan R, Habibi M, Khadimallah MA. Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle. Compos Struct. 2022;284: 115195.
5. Al-Furjan MSH, Oyarhossein MA, Habibi M, Safarpour H, Jung DW, Tounsi A. On the wave propagation of the multi-scale hybrid nanocomposite doubly curved viscoelastic panel. Compos Struct. 2021;255:112947.
6. Yang Y, Lin B, Zhang W. Experimental and numerical investigation of an arch–beam joint for an arch bridge. Arch Civ Mech Eng. 2023;23(2):101.
7. Dai Z, Zhang L, Bolandi SY, Habibi M. On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses. Compos Struct. 2021;263: 113599.
8. Arefi M. Third-order electro-elastic analysis of sandwich doubly curved piezoelectric micro shells. Mech Based Des Struct Mach. 2021;49(6):781–810.
9. Wang Y, Sun S, Luo J, et al. Low sample volume origami-paper-based graphene-modified apta sensors for label-free electrochemical detection of cancer biomarker-EGFR. Microsyst Nanoeng. 2020;6:32.
10. Araki K, Zhang RZ. Plasmon-resonance emission tailoring of “origami” graphene-covered photonic gratings. Opt Express. 2020;28(15):22791–802.
11. Yellowhorse A, Howell LL. Deployable lenticular stiffeners for origami-inspired mechanisms. Mech Based Des Struct Mach. 2018;46(5):634–49.¬ℂ1 , ℂ2 , ℂ5 , ℂ6 = ¬h2− h2𝜆𝛼(R + z)(1 + 𝜗)¬1, z, z2 , z3 dz.¬ℂ3 , ℂ4 , ℂ7 , ℂ8 = ¬h∕2−h∕2𝜆𝛼(1 + 𝜗)¬1, z, z2 , z3 dz.
12. Ning X, Wang X, Zhang Y, Yu X, Choi D, Zheng N, KimDS, Huang Y, Zhang Y, Rogers JA. Assembly of advanced materials into 3D functional structures by methods inspired by Origami and Kirigami: a review. Adv Mater Interfaces. 2018;5(13):1800284.
13. Adetayo A, Runsewe D. Synthesis and fabrication of graphene and graphene oxide: a review. Open J Compos Mater. 2019;9:207–29.
14. Sharma H, Upadhyay SH. Geometric design and deployment behavior of origami inspired conical structures. Mech Based Des Struct Mach. 2023;51(1):113–37.
15. Lin F, Xiang Y, Shen H-S. Tunable positive/negative Young’smodulus in graphene-based metamaterials. Adv Theory Sim. 2021;4(2):2000130.
16. Ho DT, Park HS, Kim SY, Schwingenschlögl U. Graphene origami with highly tunable coefficient of thermal expansion. ACS Nano. 2020;14(7):8969–74.
17. Chen H, Zhang Y-Y, Bao D-L, Que Y, Xiao W, Du S, Ouyang M, Pantelides ST, Gao H-J. Atomically precise, custom-design origami graphene nanostructures. Science. 2019;365(6457):1036–40.
18. Zhang W, Zhang Y, Zhao S, Zhang Y, Yang J. Ballistic impact induced wave propagation and dislocation of three-dimensional graphene origami/copper nanocomposites. Compos Commun. 2024;45: 101790.
19. Jiang T, Han Q, Li C. Design and bandgap optimization of multi-scale composite origami-inspired metamaterials. Int J Mech Sci. 2023;248: 108233.
20. Cranford S, Sen D, Buehler MJ. Meso-origami: folding multilayer graphene sheets. Appl Phys Lett. 2009;95: 123121.
21. Xu L, Shyu TC, Kotov NA. Origami and kirigami nanocomposites. ACS Nano. 2017;11(8):7587–99.
22. Yang H, Yeow BS, Chang T-H, Li K, Fu F, Ren H, Chen P-Y. Graphene oxide-enabled synthesis of metal oxide origamis for soft robotics. ACS Nano. 2019;13(5):5410–20.
23. Zhang H, Ma J, Zhang Y, Yang J. Failure mechanism of graphene kirigami under nanoindentation. Nanotechnology. 2022;33:375703.
24. Sun Y, et al. Effects of stitch yarns on interlaminar shear behavior of three-dimensional stitched carbon fiber epoxy composites atroom temperature and high temperature. Adv Compos Hybrid Mater. 2022;5(3):1951–65.
25. Quan TQ, Anh VM, Mahesh V, Duc ND. Vibration and nonlinear dynamic response of imperfect sandwich piezoelectric auxetic plate. Mech Adv Mater Struct. 2022;29(1):127–37.
26. Shi X, Yang Y, Zhu X, Huang Z. Stochastic dynamics analysis of the rocket shell coupling system with circular plate fasteners based on spectro-geometric method. Compos Struct. 2024;329: 117727.
27. Azrar L, Belouettar S, Wauer J. Nonlinear vibration analysis of actively loaded sandwich piezoelectric beams with geometric imperfections. Comput Struct. 2008;86(23–24):2182–91.
28. Bai B, Chen J, Bai F, Nie Q, Jia X. Corrosion effect of acid/alkalion cementitious red mud-fly ash materials containing heavy metal residues. Env Tech & Innov. 2024;33: 103485.
29. Foong SY, et al. Valorization of biomass waste to engineered activated biochar by microwave pyrolysis: progress, challenges, and future directions. Chem Eng J. 2020;389: 124401.
30. Shahgholian-Ghahfarokhi D, Safarpour M, Rahimi A. Torsional buckling analyses of functionally graded porous nanocomposite cylindrical shells reinforced with graphene platelets (GPLs). Mech Based Des Struct Mach. 2021;49(1):81–102.
31. Liang F, Wang R, Pang Q, Hu Z. Design and optimization of pressslider with steel-aluminum composite bionic sandwich structure for energy saving. J Clean Prod. 2023;428: 139341.
32. Abdul-Majeed WR, Jweeg MJ, Jameel AN. Thermal buckling of rectangular plates with different temperature distribution using strain energy method. J Eng. 2011;17(5):1047–65.
33. Fan W, et al. An antisweat interference and highly sensitive temperature sensor based on poly (3, 4-ethylenedioxythiophene)–poly (styrenesulfonate) fiber coated with polyurethane/graphene for real-time monitoring of body temperature. ACS Nano.2023;17(21):21073–82.
34. Fan W, et al. M Xene enhanced 3D needled waste denim felt forhigh-performance flexible supercapacitors. Nano-Micro Let.2024;16(1):36.
35. Jin Q, Zuo Q. Dynamic analysis of graphene-reinforced sandwich plates with piezoelectric macro fiber composite face sheets. Mech Based Des Struct Mach. 2023. https://doi.org/10.1080/15397734.2023.2185631.
36. Yang L, Ye M, Huang Y, Dong J. Study on mechanical properties of displacement-amplified mild steel bar joint damper. Iran J Sci Technol Trans Civ Eng. 2023. https:// doi. org/ 10. 1007/s40996-023-01268-7.
37. Zhao S, Zhang Y, Zhang Y, Yang J, Kitipornchai S. A functionally graded auxetic metamaterial beam with tunable nonlinear free vibration characteristics via graphene origami. Thin Walled Struct. 2022;181:109997.
38. Arefi M, Rahimi GH. Application of shear deformation theory for two dimensional electroelastic analysis of a FGP cylinder. Smart Struct Syst. 2014;13(1):1–24. https://doi.org/10.12989/sss.2014.13.1.001.
39. Jabbari M, Sohrabpour S, Eslami MR. Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads. Int J Press Vessel Pip. 2002;79(7):493–7.
40. Arefi M, Zenkour AM. Influence of micro-length-scale parameters and inhomogeneities on the bending, free vibration and wave propagation analyses of a FG Timoshenko’s sandwich piezoelectric microbeam. J Sandw Struct Mater. 2019;21(4):1243–1270.https://doi.org/10.1177/1099636217714181.
41. Cui W, Zhao L, Ge Y. Wind-induced buffeting vibration of long-span bridge considering geometric and aerodynamic nonlinearity based on reduced-order modeling. J Struct Eng.2023;149(11):4023160.
42. Bidgoli EM-R, Arefi M. Effect of porosity and characteristics of carbon nanotube on the nonlinear characteristics of a simply-supported sandwich plate. Arch Civ Mech Eng. 2023;23:214. https://doi.org/10.1007/s43452-023-00752-1.
43. Zahedan N, Ahmadi H, Liaghat G. Experimental and numerical investigation on the multi-optimization of reinforcing the side members of the vehicle structure. Arch Civ Mech Eng.2022;22:25. https://doi.org/10.1007/s43452-021-00351-y.
44. Jamil AN, Hussien RM. Vibration analysis of angle-ply laminates composite plate under thermo-mechanical effect. J Eng.2015;21(11):1–23.
45. Mohammad-Rezaei Bidgoli E, Arefi M. Nonlinear vibration analysis of sandwich plates with honeycomb core and graphene nano-platelet-reinforced face-sheets. Arch Civ Mech Eng. 2023;23:56.
46. Li J, Wang Z, Zhang S, Lin Y, Wang L, Sun C, Tan J. A novel tymandrel supported thin-wall tube bending cross-section quality analysis: a diameter-adjustable multi-point contact mandrel. Int J Adv Manuf Technol. 2023;124(11):4615–37.
47. Wang C, Wang Z, Zhang S, Liu X, Tan J. Reinforced quantum-behaved particle swarm-optimized neural network for cross-sectional distortion prediction of novel variable-diameter-die-formed metal bent tubes. J Comput Des Eng. 2023;10(3):1060–79.
48. Gan J, Li F, Li K, Li E, Li B. Dynamic failure of 3D printed negative-stiffness meta-sandwich structures under repeated impact loadings. Compos Sci Technol. 2023;234: 109928.
49. Yang S, Zhang Y, Sha Z, Huang Z, Wang H, Wang F, Li J. Deter-ministic manipulation of heat flow via three-dimensional-printed thermal meta-materials for multiple protection of critical components. ACS Appl Mater Interfaces. 2022;14(34):39354–63. https://doi.org/10.1021/acsami.2c09602.
50. Lu Z, Zhao L, Ding H, Chen L. A dual-functional metamaterial for integrated vibration isolation and energy harvesting. J Sound Vib. 2021;509: 116251.
51. Hao R, Lu Z, Ding H, Chen L. Shock isolation of an orthogonal six-DOFs platform with high-static-low-dynamic stiffness. J Appl Mech. 2023;90(11): 111004.
52. Luo Y, Liu X, Chen F, Zhang H, Xiao X. Numerical simulationon crack-inclusion interaction for rib-to-deck welded joints in orthotropic steel deck. Metals. 2023;13(8):1402. https://doi.org/10.3390/met13081402.
53. Chen F, Zhang H, Li Z, Luo Y, Xiao X, Liu Y. Residual stresses effects on fatigue crack growth behavior of rib-to-deck double-sided welded joints in orthotropic steel decks. Adv Struct Eng.2023;27(1):35–50.
54. Zhao Y, Liu K, Zhang H, Tian X, Jiang Q, Murugadoss V, Hou H. Dislocation motion in plastic deformation of nano polycrystalline metal materials: a phase field crystal method study. Adv Compos Hybrid Mater. 2022;5(3):2546–56.
55. Zhang X, Tang Y, Zhang F, Lee C. A novel aluminum-graphite dual-ion battery. Adv Energy Mater. 2016;6(11):1502588.
56. Ren Z, Zeng H, Zeng X, Chen X, Wang X. Effect of nanographite conductive concrete mixed with magnetite sand excited by different alkali activators and their combinations on the properties of conductive concrete. Buildings. 2023;13(7):1630.
57. Huang X, Chang L, Zhao H, Cai Z. Study on craniocerebral dynamics response and helmet protective performance under the blast waves. Mater Des. 2022;224: 111408.
58. Zhang X, Hao H, Tian R, Xue Q, Guan H, Yang X. Quasi-static compression and dynamic crushing behaviors of novel hybrid re-entrant auxetic metamaterials with enhanced energy-absorption. Compos Struct. 2022;288: 115399.
59. Fu ZH, Yang BJ, Shan ML, Li T, Zhu ZY, Ma CP, Gao W. Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones. Corros Sci. 2020;164:108337.
60. Wang C, Guo L, Xia Y, Zhang C, Sang X, Xu C, Zhang X. Flexural performance and damage evolution of multiple fiberglass-reinforced UV-CIPP composite materials—a view from mechanics and energy release. J Mater Res Technol. 2024;29:3317–39.
61. Guo H, Zhang J. Expansion of sandwich tubes with metal foam core under axial compression. J Appl Mech. 2023. https://doi.org/10.1115/1.4056686.
62. Tian R, Guan H, Lu X, Zhang X, Hao H, Feng W, Zhang G. Dynamic crushing behavior and energy absorption of hybrid aux-etic metamaterial inspired by Islamic motif art. Appl Math Mech Eng Ed. 2023;44(3):345–62.
63. Zhu Q, Chen J, Gou G, Chen H, Li P. Ameliorated longitudinal critically refracted—attenuation velocity method for welding residual stress measurement. J Mater Proc Technol.2017;246:267–75.
64. Majeed WI, Al-Samarraie SA, Al-Saior MM. Vibration control analysis of a smart flexible cantilever beam using smart material. J Eng. 2013;19(01):82–95.
65. Wasmi HR, Sadiq IA, Lafta MA. Non-linear analysis of laminated composite plates under general out-of-plane loading. J Eng. 2015;21(02):119–43.
66. Mohammed HAU-Q, Wasmi HR. Active vibration control of cantilever beam by using optimal LQR controller. J Eng.2018;24(11):1–17.
67. Hasan HM, Swadi MJ. Effect of thickness variable on the bending analysis of rotating functionally polymer graded carbon nanotube reinforced cylindrical panels. J Eng. 2019;25(4):155–72.
68. Ibrahim WM, Ghani RA. Free vibration analysis of laminated composite plates with general elastic boundary supports. J Eng.2017;23(4):100–24
69. Yue X, et al. Mitigation of in door air pollution: a review of recent advances in adsorption materials and catalytic oxidation. J Hazard Mater. 2021;405: 124138.
70. Lam SS, et al. Engineering pyrolysis biochar via single-step microwave steam activation for hazardous landfill leachate treatment. J Hazard Mater. 2020;390: 121649.
71. Wang C, et al. A sustainable strategy to transform cotton waste into renewable cellulose fiber self-reinforcing composite paper. J Clean Prod. 2023;429: 139567.
72. Zhang Y, et al. A waste textiles-based multilayer composite fabric with superior electromagnetic shielding, infrared stealth and flame retardance for military applications. Chem Eng J. 2023;471:144679.
73. Ge S, et al. Vacuum pyrolysis incorporating microwave heating and base mixture modification: an integrated approach to transform biowaste into eco-friendly bioenergy products. Renew Sustain Energy Rev. 2020;127: 109871.
74. Alabas MB, Majid WI. Thermal buckling analysis of laminated composite plates with general elastic boundary supports. J Eng.2020;26(3):1–17.
75. Bai B, Xu T, Nie Q, Li P. Temperature-driven migration of heavy metal Pb 2+ along with moisture movement in unsaturated soils. Int J Heat Mass Transf. 2020;153: 119573.
76. Bai B, Bai F, Nie Q, Jia X. A high-strength red mud–fly ash geo-polymer and the implications of curing temperature. Powder Technol. 2023;416: 118242.
77. Bai B, Wang J, Zhai Z, Xu T. The penetration processes of redmud filtrate in a porous medium by seepage. Transp Porous Med. 2017;117:207–27.
78. Peng W, Lam SS, Sonne C. Support Austria’s glyphosate ban. Science. 2020;367(6475):257–8.
79. Bai B, Bai F, Li X, Nie Q, Jia X, Wu H. The remediation efficiency of heavy metal pollutants in water by industrial red mudparticle waste. Environ Technol Innov. 2022;28:102.
80. Ge S, et al. Processed bamboo as a novel formaldehyde-free high-performance furniture biocomposite. ACS Appl Mater Interfaces. 2020;12(27):30824–32.
81. Hasan HM. Thermo elastic analysis of carbon nanotube-reinforced composite cylinder utilizing finite element method with the theory of elasticity. J Eng. 2017;23(8):29–45.
82. Arefi M, Najafitabar F. Buckling and free vibration analyses of a sandwich beam made of a soft core with FG-GNPs reinforced composite face-sheets using Ritz Method. Thin Walled Struct. 2021;158: 107200.
83. Arefi M, Moghaddam SK, Bidgoli EMR, Kiani M, Civalek O. Analysis of graphene nanoplatelet reinforced cylindrical shell subjected to thermo-mechanical loads. Compos Struct. 2021;255(1):112924.
84. Adab N, Arefi M, Amabili M. A comprehensive vibration analysis of rotating truncated sandwich conical microshells including porous core and GPL-reinforced face-sheets. Compos Struct.2022;279: 114761.
85. Mohammadi M, Arefi M, Dimitri R, Tornabene F. Higher-order thermo-elastic analysis of FG-CNTRC cylindrical vessels surrounded by a Pasternak foundation. Nanomaterials. 2019;9(1):79.
86. Lori Dehsaraji M, Arefi M, Loghman A. Size dependent free vibration analysis of functionally graded piezoelectric micro/nanoshell based on modified couple stress theory with considering thickness stretching effect. Defence Technol. 2021;17(1):119–34.
87. Sadiq IA, Majeed W. Thermal buckling of angleply laminated plates using new displacement function. J Eng.2019;25(12):96–113.
88. Zhou R, Bai B, Cai G, Chen X. Thermo-Hydro-Mechanic-Chemical coupling model for hydrate-bearing sediment within a unified granular thermodynamic theory. Comput Geotech. 2024;167:106057.
89. Arefi M, Allam MNM. Nonlinear responses of an arbitrary FGP circular plate resting on foundation. Smart Struct Syst. 201;16(1):81–100. https://doi.org/10.12989/sss.2015.16.1.081.
90. Arefi M, Rahimi GH. The effect of nonhomogeneity and end supports on the thermo elastic behavior of a clamped–clamped FG cylinder under mechanical and thermal loads. Int J Pres Ves Pip-ing. 2012;96–97:30–37. https://doi.org/10.1016/j.ijpvp.2012.05.009.
91. Arefi M, Mohammad-Rezaei Bidgoli E, Dimitri R, Bacciocchi M, Tornabene F. Application of sinusoidal shear deformation theory and physical neutral surface to analysis of functionally graded piezoelectric plate. Compos Part B: Eng. 2018;151:35–50. https://doi.org/10.1016/j.compositesb.2018.05.050.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025)

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-dd207de1-6688-4cb5-972e-52124da9e9f3