Investigating the reclamability of moulding sand with new, ecological inorganic binders

• Autorzy: Izdebska-Szanda I. , Szolc M. , Smoluchowska E.
• Języki publikacji: EN

Abstrakty

EN

The article presents the results of investigations, which make a fragment of the broad-scale studies carried out as a part of the statutory activity on optimising the foundry sand technology using new, modified, inorganic binders. The results of investigations regarding the effect of multiple reclamation on the technological properties of foundry sands with inorganic binders were presented in a concise manner. The reclaim sand were introduced to moulding sands prepared with the new, modified, inorganic binders bonded by the chemical reaction or by blowing with gaseous CO₂. Attention was focussed on the effect of multiple reclamation on the residual strength and bench life properties of moulding sands prepared with the new types of inorganic binders.

Słowa kluczowe

EN

innovative foundry material; innovative foundry technology; protection of environment; inorganic binder; multiple reclamation; bench life; residual strength

PL

innowacyjny materiał odlewniczy; innowacyjna technologia odlewnicza; ochrona środowiska; spoiwo nieorganiczne; wytrzymałość końcowa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 217--220
• Opis fizyczny: Bibliogr, 15 poz., rys., wykr.

Twórcy

autor

Izdebska-Szanda I.

• Instytut Odlewnictwa, ul. Zakopiańska 73, 30-418 Kraków, Polska

autor

Szolc M.

• Instytut Odlewnictwa, ul. Zakopiańska 73,, 30-418 Kraków, Polska

autor

Smoluchowska E.

• Instytut Odlewnictwa, ul. Zakopiańska 73,, 30-418 Kraków, Polska

Bibliografia

• [1] A. Baliński: Chemical modification of sodium silicate to reduce the residual strength of moulding sands, A research work of Foundry Research Institute, Kraków, No. 1013/00, (2002) 9 (in Polish).
• [2] I. Izdebska-Szanda, A. Baliński: Cohesive-adhesive properties of the chemically modified hydrated sodium silicate, A publication of the Faculty of Process and Materials Engineering and Applied Physics, The Częstochowa University of Technology, (2005) (in Polish).
• [3] Vaskova, Bobok L, Sevcova M.: Relationships between the physical characteristics of water glass and the technological characteristics of water glass-based moulding and core sands, Materials Enginering, Vol. X, No. 3, (2003) 249 (in Czech).
• [4] P. Jelinek et al.: Modified alkaline silicates – inorganic binders of the new generation,. Slevarenstvi, No. 1, (2002) 16 (in Czech).
• [5] P. Jelinek., R. Skuta, Modified sodium silicates – a new alternative for inorganic foundry binders. Materials Enginering, Vol. 10, No. 3, (2003) 283 (in Czech).
• [6] J. Novotny: Self-setting sands with geopolymer binding system, Conference Proceedings, VIII Foundry Conference Technical (2005) (in Polish).
• [7] K. Löchte, R. Boehm, Cordis, the inorganic binder system-properties and experience, Casting Plant and Technology International 2005 Vol.21 No. 3, (2005) 6.
• [8] A. Baliński et al.: Influence of modification of the sodium silicate with morphoactive agents on the mechanical properties of the moulding sands in temperatures to 900 °C. Materials Enginering, Vol. 10, No. 3, (2003) 271.
• [9] A. Baliński., I. Izdebska-Szanda: Effect of morphoactive modifiers of hydrated sodium silicate on temperature transformations taking place in moulding sands prepared with this binder, Archives of Mechanical Technology and Automation, Poznań, Vol. 24, (2004) 19-29 (in Polish).
• [10] F. Pezarski et al.: An improvement in the technology of moulding sands with inorganic binders and in their reclamation process to increase the economy and quality of castings manufactured from alloys of ferrous and non-ferrous metals, A statutory work no 6005/00, stage 2007 (in Polish).
• [11] I. Izdebska-Szanda, F. Pezarski, E. Smoluchowska: Investigating the kinetics of the binding process in moulding sands using new, environment-friendly, inorganic binders, Archives of Foundry Engineering, Vol. 8, No 2, (2008) 61-66.
• [12] I. Izdebska-Szanda et al.: An improvement in the technology of moulding sands with inorganic binders and in their reclamation process to increase the economy and quality of castings manufactured from alloys of ferrous and non-ferrous metals, A statutory work no 7005/00, stage 2008 (in Polish).
• [13] I. Izdebska-Szanda, Z. Stefański, F. Pezarski, M. Szolc: Effect of additives promoting the formation of lustrous carbon on the knocking out properties of foundry sand with new inorganic binders, Archives of Foundry Engineering, Vol.9, No 1, (2009), 17-20.
• [14] J. Dańko, M. Holtzer, R. Dańko, The analysis of reclamation systems in the aspect of reclaim quality and environmental protection, X Foundry Conference Technical (2007) (in Polish), 121–129.
• [15] J. Dańko, M. Holtzer, R. Dańko, The choice of effective reclamation processes and used moulding sands management in the aspect of the best available techniques, Archives of Foundry vol. 6 no 20, (2006) 31–38.