Application of the Ozonation Process for Shaping the Energy Properties of the Surface Layer of Polymer Construction Materials

• Autorzy: Kłonica Mariusz

Identyfikatory

DOI

10.12911/22998993/145265

• Języki publikacji: EN

Abstrakty

EN

The properties of the surface layer of construction materials are very important for making adhesive bonds. The article presents the test results for surface free energy in PA6 polyamide subjected to surface layer modification using the ozonation process. To develop the surface geometrically, the samples were subjected to mechanical processing. The comparison of results demonstrated that ozonation is an efficient and eco-friendly method of modifying the surface layer. The article also presents the comparison results for measurements of selected surface roughness parameters.

Słowa kluczowe

EN

surface layer; ozone; polymer material; surface free energy

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2022
• Tom: Vol. 23, nr 2
• Strony: 212--219
• Opis fizyczny: Bibliogr. 25 poz., rys.

Twórcy

autor

Kłonica Mariusz

• Faculty of Mechanical Engineering, Department of Production Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

• https://orcid.org/0000-0001-6149-1710

Bibliografia

• 1. Ardelean H., Petit S., Laurens P., Marcus P., Arefi-Khonsari F., 2005, Effects of different laser and plasma treatments on the interface and adherence between evaporated aluminium and polyethylene terephthalate films: X-ray photoemission, and adhesion studies, Applied Surface Science, 243, 1-4, 304-318.
• 2. Bielawski R, Rządkowski W, Kowalik MP, Kłonica M. 2020, Safety of Aircraft Structures in the Context of Composite Element Connection. Int Rev Aerospace Eng (IREASE);13:159–164–164.;13(5):159. doi.org/10.15866/irease.v13i5.18805.
• 3. Bieliński D. M., Lipiński P., Okrój W., Klimek L., 2006, Selected examples of the modification of the surface layer of polymers by ion bombardment, Inżynieria Materiałowa, 27, 6, 1337-1342.
• 4. Bocci V., 2005, Ozone. A New Medical Drug, Springer Netherlands, Dordrecht.
• 5. Chibowski E., 2007, On some relations between advancing, receding and Young’s contact angles, Advances in Colloid and Interface Science, 133, 1, 51-59.
• 6. Chibowski E., Gonzalez-Caballero F., 1993, Interpretation of contact angle hysteresis, Journal of Adhesion Science and Technology, 7, 11, 1195-1209.
• 7. Davies J., Haq S., Hawke T., Sargent J.P., 2009, A practical approach to the development of a synthetic Gecko tape, International Journal of Adhesion and Adhesives, 29, 4, 380-390.
• 8. Fowkes F. M., 1964, Attractive forces at interfaces, Industrial & Engineering Chemistry, 56, 12, 40-52.
• 9. Geim A. K., Dubonos S. V., Grigorieva I. V., Novoselov K. S., Zhukov A.A., Shapoval S. Y., 2003, Microfabricated adhesive mimicking gecko foothair, Nature Materials, 2, 7, 461-463.
• 10. Kaless A., Schulz U., Munzert P, Kaiser N., 2005, NANO-motheye antireflection pattern by plasma treatment of polymers, Surface and Coatings Technology, 200, 1-4, 58-61.
• 11. Kogelschatz U., 2000, Fundamentals and applications of dielectric-barrier discharges, HAKONE VII International Symposium On High Pressure Low Temperature Plasma Chemistry, Greifswald.
• 12. KłonicaM.,2018,Analysisoftheeffectofselectedfactors on the strength of adhesive joints IOPConference Series: Materials Science and Engineering, 393(1), 012041, doi:10.1088/1757-899X/393/1/012041.
• 13. Kłonica M, Kuczmaszewski J.: 2019, Modification of Ti6Al4V titanium alloy surface layer in the ozone atmosphere. Materials, 12(13), 2113; https://doi.org/10.3390/ma12132113
• 14. Kłonica M., Kuczmaszewski J., Samborski S.: 2016, Effect of a notch on impact resistance of the Epidian 57/Z1 epoxy material after “Thermal Shock”, Solid State Phenomena ,Vol. 240, 161–167, 10.4028/www.scientific.net/SSP.240.161
• 15. Kuczmaszewski J., 2006, Fundamentals of metal-metal adhesive joint design, Lublin University of Technology, Branch of the Polish Academy of Sciences in Lublin.
• 16. Laura A. Ardila-Rodríguez, Bart Boshuizen, Calvin Rans, Johannes A. Poulis: 2021, The influence of grit blasting and UV/Ozone treatments on Ti-Ti adhesive bonds and their durability after sol-gel and primer application. International Journal of Adhesion and Adhesives. https://doi.org/10.1016/j.ijadhadh.2020.102750.
• 17. Milani R., Gleria M., Sassi A., Jaeger R. De., Mazzah A., Jama C., Gengembre L., 2008, Surface modification of plasma-treated poliamide-6 with fluorinated alcohols and azobenzene compounds using chlorinated phosphazenes as coupling agents, Molecular Crystals and Liquid Crystals, 483, 62–70.
• 18. Okuda T., Kurose K., Nishijima W., Okada M., 2007, Separation of polyvinyl chloride from plastic mixture by froth flotation after surface modification with ozone, Ozone: Science and Engineering, 29, 5, 373-377.
• 19. Owens D.K., Wendt R.C., 1969, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, 13, 8,1741-1747.
• 20. Ozonek J., Fijałkowski E., 2007, Energy and process aspects of ozone production and application in technology, Monographs of the Environmental Engineering Committee of the Polish Academy of Sciences, Lublin (in Polish).
• 21. Skurat V, 2003, Vacuum ultraviolet photochemistry of polymers, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 208, 8, 27-34.
• 22. Vamsi Krishna Dommeti, Sumit Pramanik, Sandipan Roy, 2021, Effect of polyethylene glycol on surface coating of Ta2O5 onto titanium substrate in sol-gel technique.Acta of Bioengineering and Biomechanics. 23, 1, DOI: 10.37190/ABB-01757-2020-05.
• 23. Winands G. J.J., 2007, Efficient streamer plasma generation, Technische Universiteit Eindhoven, Eindhoven.
• 24. Żenkiewicz M., 2000, Adhesion and modification of the surface layer of macromolecular materials, Scientific and Technical Publishing House, Warsaw (in Polish).
• 25. Żenkiewicz M., 2007, Analysis of the most important methods of investigations of polymeric materials’ surface free energy, Polimery, 52, 10, 760-767.