Coloration of poly(lactic acid) based textiles – a review

• Autorzy: Baig Gulzar Ahmad

Identyfikatory

DOI

10.14314/polimery.2020.6.1

Warianty tytułu

PL

Barwienie tkanin na bazie poli(kwasu mlekowego) – przegląd

• Języki publikacji: EN

Abstrakty

EN

Polyester fibers include industrially important cellulose acetate, poly(ethylene terephthalate) (PET), poly(1,4-cyclohexane dimethylene terephthalate) (PCDT), poly(trimethylene terephthalate) (PTT), poly(lactic acid) (PLA) fibers; however, it is the last one that has been considered to be a “green“ one. PLA is an eco-friendly polyester material that is obtained from renewable resources. The effect of chromophoregens and substituents on exhaustion, colorimetric and fastness properties of PLA with newly developed disperse dyes has been outlined. The differences in colorimetric properties, wavelength-shift and deep-dyeing behavior of PLA as compared to PET have been explained. Use of non-aqueous dyeing media such a super critical carbon dioxide (sc-CO2 ), various organic solvents and carriers have been discussed.

PL

Ważne dla przemysłu włókna poliestrowe bazują na: octanie celulozy, poli(tereftalanie etylenu) (PET), poli(tereftalanie 1,4-cykloheksanodimetylenu) (PCDT), poli(tereftalanie trimetylenu) (PTT) i, ostatnio uznanym za „zielony”, poli(kwasie mlekowym) (PLA). PLA to ekologiczny materiał poliestrowy pozyskiwany z zasobów odnawialnych. W artykule omówiono wpływ chromoforegenów i podstawników obecnych w cząsteczkach nowo opracowanych barwników dyspersyjnych na właściwości zmęczeniowe, kolorymetryczne i trwałość barwionych włókien PLA. Wyjaśniono różnice we właściwościach kolorymetrycznych, przesunięciu długości fali i głębokości zabarwienia PLA i PET. Przedstawiono zastosowanie w procesie barwienia włókien PLA niewodnych środków barwiących, takich jak: nadkrytyczny ditlenek węgla (sc-CO2 ), różne rozpuszczalniki organiczne i nośniki.

Słowa kluczowe

EN

PLA; sustainability; biodegradable; dyeing; printing; fastness properties; fiber treatment; environmental impact

PL

PLA; zrównoważoność; biodegradowalny; farbowanie; drukowanie; właściwości wytrzymałościowe; obróbka włókien; wpływ na środowisko

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2020
• Tom: T. 65, nr 6
• Strony: 415--429
• Opis fizyczny: Bibliogr. 86 poz., rys.

Twórcy

autor

Baig Gulzar Ahmad

• University College of Textile Engineering, Bahauddin Zakariya University Multan, Pakistan

Bibliografia

• [1] Baig G.A.: Ph.D Thesis, University of Manchester, UK 2012.
• [2] Baig G.A., Carr C.M.: Polish Journal of Chemical Technology 2014, 16 (3), 45. http://dx.doi.org/10.2478/pjct-2014-0049
• [3] Phillips D., Suesat J., Wilding M. et al.: Coloration Technology 2003, 119, 128. https://doi.org/10.1111/j.1478-4408.2003.tb00162.x
• [4] Phillips D., Suesat J., Wilding M. et al.: Coloration Technology 2004, 120, 41. https://doi.org/10.1111/j.1478-4408.2004.tb00205.x
• [5] Phillips D., Suesat J., Wilding M. et al.: Coloration Technology 2004, 120, 35. https://doi.org/10.1111/j.1478-4408.2004.tb00204.x
• [6] DyStar, Textilfarben GmbH & Co. Deutschland KG, ‘IngeoTM Fiber Coloration Pack’, DyStar plc 2004.
• [7] Avinc O., Khoddami A.: Fibre Chemistry 2010, 42 (1), 68.
• [8] Hussain T., Tausif M., Ashraf M.: Journal of Cleaner Production 2015, 108, 476. http://dx.doi.org/10.1016/j.jclepro.2015.05.126
• [9] He L., Zhang S.F., Bing T.T. et al.: Chinese Chemical Letters 2007, 18 (9), 1151. https://doi.org/10.1016/j.cclet.2007.07.031
• [10] He L., Zhang S.F., Tang B.T. et al.: Chinese Journal of Chemical Engineering 2009, 17, 156. https://doi.org/10.1016/S1004-9541(09)60048-3
• [11] Karst D., Yang Y.: Journal of Applied Polymer Science 2005, 96, 416. https://doi.org/10.1002/app.21456
• [12] Karst D., Nama D., Yang Y.: Journal of Colloid and Interface Science 2007, 310, 106. http://dx.doi.org/10.1016/j.jcis.2007.01.037
• [13] He L., Lu L., Zhang S.F., Freeman H.S.: Coloration Technology 2010, 126, 92. https://doi.org/10.1111/j.1478-4408.2010.00232.x
• [14] Choi J-H, Lee H-Y., Towns A.D.: Fibers and Polymers 2010, 11, 199. http://dx.doi.org/10.1007/s12221-010-0199-1
• [15] Hansakulwat P., Sae-Bae P., Setthayanond J., Na Phatthalung I.: Applied Mechanics and Materials 2014, 535, 641. https://doi.org/10.4028/www.scientific.net/AMM.535.641
• [16] Cui Z., Guo J., Chen W., Tang B.T.: Advanced Materials Research 2012, 441, 503. https://doi.org/10.4028/www.scientific.net/AMR.441.503
• [17] Cui Z., Wang X., Chen W. et al.: Coloration Technology 2012, 128, 283. https://doi.org/10.1111/j.1478-4408.2012.00376.x
• [18] Lu L., Liang H., Zhang S., Freeman H.S.: Coloration Technology 2012, 128, 121. https://doi.org/10.1111/j.1478-4408.2011.00354.x
• [19] Burkinshaw S.M., Jeong D.S.: Dyes and Pigments 2012, 92, 1025. https://doi.org/10.1016/j.dyepig.2011.06.020
• [20] Choi J-H, Choi J-Y, Kim E-M. et al.: Coloration Technology 2013, 129, 352. https://doi.org/10.1111/cote.12037
• [21] Ribba K., Goyanes S.: Material Letters 2016, 182, 94. http://dx.doi.org/10.1016/j.matlet.2016.06.090
• [22] Tayfun U., Dogan M.: mPolymer Bulletin 2016, 73, 1581. http://dx.doi.org/10.1007/s00289-015-1564-4
• [23] Baykuş O., Davulcu A., Dogan M.: Fibers and Polymers 2015, 16, 2558. http://dx.doi.org/10.1007/s12221-015-5613-2
• [24] Baykuş O., Dogan S.D., Tayfun U. et al.: The Journal of The Textile Institute 2017, 108, 569. https://doi.org/10.1080/00405000.2016.1175536
• [25] Baig G.A.: Coloration Technology 2012, 128, 114. https://doi.org/10.1111/j.1478-4408.2011.00353.x
• [26] Sawada K., Ueda M.: Dyes and Pigments 2007, 74, 81. https://doi.org/10.1016/j.dyepig.2006.01.015
• [27] Burkinshaw S.M., Jeong D.S., Chun T.I.: Dyes and Pigments 2013, 97, 361. https://doi.org/10.1016/j.dyepig.2011.12.007
• [28] Burkinshaw S.M., Jeong D.S., Chun T.I.: Dyes and Pigments 2013, 97, 374. https://doi.org/10.1016/j.dyepig.2012.12.026
• [29] Koo G.-H., Jang J.: Fibers Polymers 2009, 9, 674. https://doi.org/10.1007/s12221-008-0106-1
• [30] Baykuş O., Davulcu A., Dogan M.: Polymer Bulletin 2017, 12. https://doi.org/10.1007/s00289-017-2010-6
• [31] Sriumaroum V., Liprapan S., Siriphet B. et al.: Advanced Materials Research 2011, 233–235, 1384. https://doi.org/10.4028/www.scientific.net/AMR.233-235.1384
• [32] Wu J., Ke J.: Advanced Materials Research 2011, 183–185, 2000. https://doi.org/10.4028/www.scientific.net/AMR.183-185.2000
• [33] Ujjin S., Jantip S.: Advanced Materials Research 2012, 486, 384. https://doi.org/10.4028/www.scientific.net/AMR.486.384
• [34] Sriumaroum V., Suesat J., Suwanruji P.: International Journal of Bioscience, Biochemistry and Bioinformatics 2012, 2, 155.
• [35] Wu J., Guo H., Ke J., Fan J.: Indian Journal of Fibre & Textile Research 2013, 38, 424.
• [36] Sidarkote R., Suwanruji P., Suesat J.: Advanced Materials Research 2014, 1025–1026, 531. https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.531
• [37] Karim M.N., Afroj S., Rigout M. et al.: Dyes and Pigments 2014, 103, 168. https://doi.org/10.1016/j.dyepig.2013.12.010
• [38] Karim M.N., Rigout M., Yeates S.G., Carr C.: Journal of Materials Science 2015, 50, 4576. http://dx.doi.org/10.1007/s10853-015-9006-0
• [39] Xu S., Chen J., Chen I. et al.: Key Engineering Materials 2016, 671, 121. https://doi.org/10.4028/www.scientific.net/KEM.671.121
• [40] Xu S., Chen J., Wang B., Yang Y.: Journal of Colloid and Interface Science 2015, 458, 22. http://dx.doi.org/10.1016/j.jcis.2015.07.028
• [41] Fu Z., Huang H., Yu L. et al. Applied Mechanics and Materials 2013, 364, 660. https://doi.org/10.4028/www.scientific.net/AMM.364.660
• [42] Hawkyard C.: “Synthetic Fiber Dyeing”, S.D.C. Bradford 2004, p. 58.
• [43] Phillips D., Suesat J., Taylor J.A. et al.: Coloration Technology 2004, 120, 260. https://doi.org/10.1111/j.1478-4408.2004.tb00128.x
• [44] Baig G.A.: Fibers and Polymers 2013, 14, 1912. https://doi.org/10.1007/s12221-013-1912-7
• [45] Suesat J.: PhD Thesis, University of Manchester, Manchester, UK 2004.
• [46] Yang Y., Huda S.: “The balance between dyeing and physical properties of PLA”, Proceedings of the AATCC International Conference and Exhibition 2002.
• [47] Yang Y., Huda S.: Journal of Applied Polymer Science 2003, 90, 3285. https://doi.org/10.1002/app.13062
• [48] Yang Y., Huda S.: AATCC Review 2003, 3, 56.
• [49] Nakamura T., Ishii K., Kubokawa H. et al.: “An overview on dyeing properties of polylactic acid (PLA) fiber”, Proceedings of the AATCC International Conference and Exhibition, USA 2001.
• [50] Nakamura T.: International Textile Bulletin 2003, 4, 68.
• [51] Shore J.: “Colorants and Auxiliaries”, 2nd Edition, Vol. 2, SDC, Bradford, UK 2002.
• [52] Kinashi K., Suzuki T., Yasunaga H. et al.: Dyes and Pigments 2017, 145, 444. https://doi.org/10.1016/j.dyepig.2017.06.040
• [53] Bach E., Knittel D., Schollmeyer E.: Coloration Technology 2006, 122, 252. https://doi.org/10.1111/j.1478-4408.2006.00037.x
• [54] Wen H., Dai J.J.: Journal of Applied Polymer Science 2007, 105, 1903. https://doi.org/10.1002/app.26234
• [55] Xu S., Chen J., Wang B., Yang Y.: ACS Sustainable Chemistry and Engineering 2015, 3, 1039. https://doi.org/10.1021/sc500767w
• [56] Xu S., Chen J., Wang B., Yang Y.: Journal of Cleaner Production 2016, 112, 987. http://dx.doi.org/10.1016/j.jclepro.2015.08.114
• [57] Choi H.J., Seo Y.W.: Fibers and Polymers 2006, 7, 270. https://doi.org/10.1007/BF02875684
• [58] Choi H.J., Kim M., Park J. et al.: Fibers and Polymers 2007, 8, 37. https://doi.org/10.1007/BF02908157
• [59] Blackburn R.S., Zhao X., Farrington D. W., Johnson L.: Dyes and Pigments 2006, 70, 251. https://doi.org/10.1016/j.dyepig.2005.05.011
• [60] Fattahi F., Izadan H., Khoddami A.: Progress in Color,Colorants and Coatings 2012, 5, 15.
• [61] Lunt J., Shafer A.L.: Journal of Industrial Textiles 2000, 29, 191. http://dx.doi.org/10.1177/152808370002900304
• [62] Lunt J., Bone J.: AATCC Review 2001, 1, 20.
• [63] Burkinshaw S.M., Jeong D.S.: Dyes and Pigments 2012, 92, 988. https://doi.org/10.1016/j.dyepig.2011.07.005
• [64] Dugan J.S.: “Novel Properties of PLA Fibers, Research Fiber Innovation Technology”, Inc., INTC 2001, pp. 9–33.
• [65] Avinc O.: PhD Thesis, University of Manchester, UK 2007.
• [66] Suesat J., Mungmeechai T., Suwanruji P. et al.: Coloration Technology 2011, 127, 217. https://doi.org/10.1111/j.1478-4408.2011.00301.x
• [67] Reichardt C.: “Solvents and Solvent Effects in Organic Chemistry”, 3rd Ed., Weinheim: Wiley-VCH Verlag GmbH & Co. KgaA, 2003, p. 330 .
• [68] Avinc O., Phillips D., Wilding M.: Coloration Technology 2009, 125, 288. http://dx.doi.org/10.1111/j.1478-4408.2009.00209.x
• [69] Mogi K., Negulescu T., Kubokawa H., Komatsu H.: Sen’ i Gakkaishi 2001, 57, 234. https://doi.org/10.2115/fiber.57.234
• [70] Mogi K., Nakamura T., Kubokawa H., Komatsu H.: Sen’ i Gakkaishi 2001, 57, 239. https://doi.org/10.2115/fiber.57.239
• [71] Mogi K., Nakamura T., Kubokawa H., Komatsu H.: Sen’ i Gakkaishi 2003, 59, 198. https://doi.org/10.2115/fiber.59.198
• [72] Avinc O., Wilding M., Bone J. et al.: Coloration Technology 2010, 126, 353. https://doi.org/10.1111/j.1478-4408.2010.00269.x
• [73] Park Y.K., Jo A.R., Jang S.S., Lee J.J.: Coloration Technology 2016, 132, 361. https://doi.org/10.1111/cote.12228
• [74] Avinc O., Phillips D., Wilding M. et al.: Coloration Technology 2006, 122, 157. https://doi.org/10.1111/j.1478-4408.2006.00023.x
• [75] Burkinshaw S.M., Jeong D.: Dyes and Pigments 2008, 77, 171. https://doi.org/10.1016/j.dyepig.2007.04.005
• [76] Burkinshaw S.M., Jeong D.: Dyes and Pigments 2008, 77, 180. https://doi.org/10.1016/j.dyepig.2007.05.010
• [77] Burkinshaw S.M., Jeong D.S.: Dyes and Pigments 2008, 77, 387. https://doi.org/10.1016/j.dyepig.2007.06.006
• [78] Avinc O.: Textile Research Journal 2011, 81, 1158. http://dx.doi.org/10.1177/0040517511402124
• [79] Avinc O.: Textile Research Journal 2011, 81, 1049.
• [80] Avinc O., Eren H.A., Uysal P.: Coloration Technology 2012, 128, 479. https://doi.org/10.1111/j.1478-4408.2012.00403
• [81] Eren H.A., Avinc O., Uysal P., Wilding M.: Textile Research Journal 2011, 81, 1091.
• [82] Eren H.A.: Coloration Technology 2007, 23, 224. https://doi.org/10.1111/j.1478-4408.2007.00087.x
• [83] Eren H.A.: Coloration Technology 2006, 122, 329. https://doi.org/10.1111/j.1478-4408.2006.00049.x
• [84] Eren H.A., Anis P.: “Examining the effectiveness of oxidative clearing in one-step dyeing of polyester/cotton fabrics” 2nd, International Istanbul Textile Congress, Istanbul 2004.
• [85] Gomes J.I.N.R, Lima C.J.E., Almeida J.R.: “Oxidative clearing of polyester as an alternative to reductionclearing: A comparative study”, Proceedings of the AATCC International Conference and Exhibition, 2000, p. 1.
• [86] Aleem A., Christie R.M.: Coloration Technology 2016, 132, 280. https://doi.org/10.1111/cote.12217

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).