PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of technical condition of control and measurement equipment on calibration results

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the paper there are analyzed the procedures used in the process of calibrating concerning control and measurement equipment. There was assumed the mathematical model of the measuring instrument which was then analyzed. The factors that result from the imperfect technical condition of the control and measurement equipment and may have an impact on the measurement results were also analyzed. Models of errors' models were assumed that may affect the calibration results. The static calibration of control and measurement equipment was analyzed. The results of numerical simulations concerning the static calibration of control and measurement equipment were presented, taking into account the linear and non-linear processing functions of the measurement equipment. The results of computations obtained for various models of processing functions were compared with each other and conclusions were drawn regarding the accuracy of the mapping of the measured quantity.
Wydawca
Rocznik
Strony
79--88
Opis fizyczny
Bibliogr. 23 poz., rys., tab.
Twórcy
  • Rzeszow University of Technology, Poland
  • Rzeszow University of Technology, Poland
  • Rzeszow University of Technology, Poland
Bibliografia
  • [1] Arendarski, J., Gliwa-Gliwińśki, J., Jabłoński, Z., Ratajczyk, E., Tomasik (red.), J., Żebrowska-Łucyk, S., 2009. Sprawdzanie przyrządów do pomiarów długości i kąta, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.
  • [2] Bellman, R., 1960. Introduction to matrix analysis, McGraw-Hill, New York.
  • [3] Doyle, J., F., 2004. Modern experimental stress analysis, Willey, Chichester.
  • [4] Draper, N.R., Smith, H., 1981. Applied regression analysis, Willey, New York.
  • [5] Hagel, R., 1975. Miernictwo dynamiczne, Wydawnictwa Naukowo-Techniczne, Warszawa.
  • [6] Horn, R.A., Johnson, C., 1986. Matrix analysis, Cambridge University Press, Cambridge.
  • [7] IEC 60050-301:2000. International Electrotechnical Vocabulary (IEV) - Part 301: General terms on measurements in electricity.
  • [8] International Dictionary of Basic and General Metrology Terms, 1993. Central Office of Measures, Warsaw.
  • [9] ISO 14978:2018. Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment
  • [10] ISO 9000:2015a. Quality management system – Fundamentals and vocabulary.
  • [11] ISO 9001:2015b. Quality management systems – Requirements.
  • [12] ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories
  • [13] ISO/IEC Guide 99:2010. International vocabulary of metrology - Basic and general concepts and associated terms (VIM)
  • [14] Jakubiec, W., Malinowski, J., 2004. Metrologia wielkości geometrycznych, Wydawnictwa Naukowo-Techniczne, Warszawa.
  • [15] Jakubiec, W., Zator, S., Majda, P., 2014. Metrologia, Polskie Wydawnictwo Ekonomiczne S.A., Warszawa.
  • [16] Lawson, C., Hanson, R.J., 1974. Solving least squares problems, Prentice-Hall, Englewod Cliffs.
  • [17] Ostasz G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points, Management Systems in Production Engineering, 28(1), 29-33.
  • [18] Pacana A., Czerwińska K., Bednarowa L., 2018. Comprehensive improvement of the surface quality of the diesel engine piston, Metalirgija, 58, 3-4, 2018, 329-332.
  • [19] Piotrowski, J., Kostyrko, K., 2012. Wzorcowanie aparatury pomiarowej, Wydawnictwo Naukowe PWN S.A., Warszawa.
  • [20] Siwiec, D., Bednárowá, L., Pacana, A., Zawada, M., Rusko, M., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing. Przemysł Chemiczny, 98(10), 1594-1596.
  • [21] Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives, 27(1), 1-7. https://doi.org/10.30657/pea.2021.27.1
  • [22] Tikhonov, A.N., Arsenin, V.Y., 1977. Solutions of ill-posed problems, Willey, New York.
  • [23] Willkinson, J.H., 1965. The algebraic eigenvalue problem, Clarendon Press, Oxford.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-db245dc4-c617-4ca1-8f31-7e5578701668
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.