Influence of technical condition of control and measurement equipment on calibration results

• Autorzy: Kawalec Małgorzata , Czerwińska Karolina , Pacana Andrzej

Identyfikatory

DOI

10.2478/czoto-2021-0009

• Języki publikacji: EN

Abstrakty

EN

In the paper there are analyzed the procedures used in the process of calibrating concerning control and measurement equipment. There was assumed the mathematical model of the measuring instrument which was then analyzed. The factors that result from the imperfect technical condition of the control and measurement equipment and may have an impact on the measurement results were also analyzed. Models of errors' models were assumed that may affect the calibration results. The static calibration of control and measurement equipment was analyzed. The results of numerical simulations concerning the static calibration of control and measurement equipment were presented, taking into account the linear and non-linear processing functions of the measurement equipment. The results of computations obtained for various models of processing functions were compared with each other and conclusions were drawn regarding the accuracy of the mapping of the measured quantity.

Słowa kluczowe

EN

management engineering; measurement equipment; static calibration; processing function; numerical simulation; regression analysis

PL

inżynieria zarządzania; aparatura pomiarowa; kalibracja statyczna; funkcja przetwarzania; symulacja numeryczna; analiza regresji

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2021
• Tom: Vol. 3, nr 1
• Strony: 79--88
• Opis fizyczny: Bibliogr. 23 poz., rys., tab.

Twórcy

autor

Kawalec Małgorzata

• Rzeszow University of Technology, Poland

• https://orcid.org/0000-0003-3612-0971+

autor

Czerwińska Karolina

• Rzeszow University of Technology, Poland

• https://orcid.org/0000-0003-2150-0963+

autor

Pacana Andrzej

• Rzeszow University of Technology, Poland

• https://orcid.org/0000-0003-1121-6352+

Bibliografia

• [1] Arendarski, J., Gliwa-Gliwińśki, J., Jabłoński, Z., Ratajczyk, E., Tomasik (red.), J., Żebrowska-Łucyk, S., 2009. Sprawdzanie przyrządów do pomiarów długości i kąta, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.
• [2] Bellman, R., 1960. Introduction to matrix analysis, McGraw-Hill, New York.
• [3] Doyle, J., F., 2004. Modern experimental stress analysis, Willey, Chichester.
• [4] Draper, N.R., Smith, H., 1981. Applied regression analysis, Willey, New York.
• [5] Hagel, R., 1975. Miernictwo dynamiczne, Wydawnictwa Naukowo-Techniczne, Warszawa.
• [6] Horn, R.A., Johnson, C., 1986. Matrix analysis, Cambridge University Press, Cambridge.
• [7] IEC 60050-301:2000. International Electrotechnical Vocabulary (IEV) - Part 301: General terms on measurements in electricity.
• [8] International Dictionary of Basic and General Metrology Terms, 1993. Central Office of Measures, Warsaw.
• [9] ISO 14978:2018. Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment
• [10] ISO 9000:2015a. Quality management system – Fundamentals and vocabulary.
• [11] ISO 9001:2015b. Quality management systems – Requirements.
• [12] ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories
• [13] ISO/IEC Guide 99:2010. International vocabulary of metrology - Basic and general concepts and associated terms (VIM)
• [14] Jakubiec, W., Malinowski, J., 2004. Metrologia wielkości geometrycznych, Wydawnictwa Naukowo-Techniczne, Warszawa.
• [15] Jakubiec, W., Zator, S., Majda, P., 2014. Metrologia, Polskie Wydawnictwo Ekonomiczne S.A., Warszawa.
• [16] Lawson, C., Hanson, R.J., 1974. Solving least squares problems, Prentice-Hall, Englewod Cliffs.
• [17] Ostasz G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points, Management Systems in Production Engineering, 28(1), 29-33.
• [18] Pacana A., Czerwińska K., Bednarowa L., 2018. Comprehensive improvement of the surface quality of the diesel engine piston, Metalirgija, 58, 3-4, 2018, 329-332.
• [19] Piotrowski, J., Kostyrko, K., 2012. Wzorcowanie aparatury pomiarowej, Wydawnictwo Naukowe PWN S.A., Warszawa.
• [20] Siwiec, D., Bednárowá, L., Pacana, A., Zawada, M., Rusko, M., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing. Przemysł Chemiczny, 98(10), 1594-1596.
• [21] Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives, 27(1), 1-7. https://doi.org/10.30657/pea.2021.27.1
• [22] Tikhonov, A.N., Arsenin, V.Y., 1977. Solutions of ill-posed problems, Willey, New York.
• [23] Willkinson, J.H., 1965. The algebraic eigenvalue problem, Clarendon Press, Oxford.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).