Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Simulation of a forging process of a hollow ball using a plastic mandrel
Języki publikacji
Abstrakty
W artykule przedstawiono i omówiono wybrane wyniki badań teoretycznych, dotyczących procesu kucia odkuwki kuli drążonej na zimno z użyciem rdzenia plastycznego. Przyjęto, że odkuwka jest wykonana ze stali nierdzewnej, natomiast rdzeń plastyczny jako dodatkowe narzędzie jest odkształcane plastycznie i wykonane ze stopu niskotopliwego. Zwrócono uwagę na rolę rdzenia plastycznego w procesie kucia przedmiotowej odkuwki, wpływ rdzenia na wybrane warunki kucia oraz możliwość unikania wyboczenia materiału odkuwki. Ponadto, przybliżono autorską metodę interpretacji wyników obliczeń MES pod kątem przewidywania wystąpienia lub niewystąpienia wspominanego zjawiska wyboczenia.
The paper presents selected results of theoretical research on the forging process a hollow ball using a plastic mandrel (core) under cold forming conditions. It has been assumed the forging is made of stainless steel and the plastic mandrel is made of a low-melting alloy and is an additional tool that is plastically deformed. It has been focused on the role of the plastic mandrel in the forming process of a hollow ball forging, the influence of the mandrel on the selected process conditions and the possibility of preventing the buckling phenomenon of the forging material. Moreover, the author's method of interpreting the results of FEM calculations was presented. By analyzing the numerical results, it is possible to predict the occurrence (or non-occurrence) of the buckling phenomenon in this forging process.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
21--26
Opis fizyczny
Bibliogr. 5 poz., rys.
Twórcy
autor
- Politechnika Lubelska, Wydział Mechaniczny, Katedra Obróbki Plastycznej Metali
Bibliografia
- [1] Samołyk,G., Winiarski,G. Selected aspects of a cold forging process for hollow balls. Int J Adv Manuf Technol 119, 2479–2494 (2022). https://doi.org/10.1007/s00170-021-08584-0.
- [2] Samołyk G, Winiarski G (2019) Anaysis of single-operation cold forging of a hollow ball from a tubular billet. Int J Adv Manuf Technol 103:3045–3056. https://doi.org/10.1007/s00170-019-03779-y.
- [3] Kang JH, Lee HW (2016) Research on ball forging by ring rolling process. Int J Appl Eng Res 11(20):7823–7828.
- [4] Skrochocki D, Tomczak J (2016) Numerical simulation of rotary compression process of hollow balls. Strength Mater 48(4):583–591.
- [5] Alhussainy F, Sheikh MN, Hadi MNS (2017) Behaviour of small diameter steel tubes under axial compression. Structures 11:155–163. https://doi.org/10.1016/j.istruc.2017.05.006.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-db05bff4-9469-4c6f-919a-46c43a5bcfd0