Digital Material Representation Model of Porous Microstructure Based on 3D Reconstruction Algorithm

• Autorzy: Madej Ł. , Mojżeszko M. , Chrapoński J. , Roskosz S. , Cwajna J.

Identyfikatory

DOI

10.1515/amm-2017-0083

• Języki publikacji: EN

Abstrakty

EN

Development of the Digital Material Representation (DMR) model, based on 3D reconstruction algorithm and serial sectioning, is the main goal of the present paper. Details on the serial sectioning and image processing algorithms are presented first. Serial sectioning is realized on the basis of light microscopy (LM). Then concept of 3D reconstruction and developed algorithms are presented. Two approaches, based on shape coefficients and the flood fill algorithms, are developed to identify corresponding features on subsequent 2D images. Then, the interpolation algorithm to reconstruct 3D volume between 2D images is presented. Finally, obtained 3D model is an input for finite element mesh generation software for subsequent finite element calculations.

Słowa kluczowe

EN

3D reconstruction; digital material representation; serial sectioning; porous microstructure; finite element method

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 563--569
• Opis fizyczny: Bibliogr. 8 poz., rys., wzory

Twórcy

autor

Madej Ł.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Mojżeszko M.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Chrapoński J.

• Silesian University of Technology Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

autor

Roskosz S.

• Silesian University of Technology Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

autor

Cwajna J.

• Silesian University of Technology Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

Bibliografia

• [1] M. Pietrzyk, L. Madej, L. Rauch, D. Szeliga, Computational Materials Engineering: achieving high accuracy and efficiency in metals processing simulations, 2015 Butterworth-Heinemann Elsevier.
• [2] O.N. Senkov, D.B. Miracle, S.A. Firstov, Metalic materials with high structural efficiency, NATO Science Series 146 (2003).
• [3] D. Raabe, R.C. Becker, Model. Simul. Mater. Sc. 8, 445-462 (2000).
• [4] R. Logé, H. Resk, Z. Sun, L. Delannay, M. Bernacki, Steel Res. Int. 81, 1420-1425 (2010).
• [5] L. Wojnar, K.J. Kurzydłowski, J. Szala, ASM Handbook Metallography and Microstructures 9, 403-427 (2004).
• [6] J. Schroeder, D. Balzani, D. Brands, Arch. Appl. Mech. 81, 975-979 (2011).
• [7] www.crbond.com (2011).
• [8] M. Madej, F. Krużel, P. Cybułka, K. Perzyński, K. Banaś, Computer Methods in Materials Science 12, 85-96 (2012).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).