Effect of Forge Application on Microstructural and Mechanical Properties of AISI 316 Using Direct Drive Friction Welding Process

• Autorzy: Hassan Jabbar A. , Boukharouba T. , Miroud D.

Identyfikatory

DOI

10.24425/amm.2022.139692

• Języki publikacji: EN

Abstrakty

EN

Present study introduces effect of forge application and elimination on microstructural and mechanical properties of AISI 316 during friction welding. Temperature measurements, microstructure, micro-hardness, tensile test, scanning electron microscopy and X-ray diffraction were evaluated. Maximum temperature recorded was 819°C while forge was applied between 357°C-237°C. Thermo-mechanically affected zone and highly plastically deformed zone were created at the interface at elimination and application of forge respectively. Ultimate tensile strength decreased and ductility increased when forge elimination compared to forge application. Tensile fracture was occurred adjacent to the welding interface for both cases, though, after forge application, ductile fracture mode and cleavage features through the fingerprints were observed in the fracture morphology. Redistribution and concentration of gamma iron in 111 level after forge application and heat treated of AISI 316.

Słowa kluczowe

EN

friction welding; forge phase; micro-hardness; ultimate tensile strength; X-ray diffraction

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 3
• Strony: 987--992
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab.

Twórcy

autor

Hassan Jabbar A.

• Houari Boumediene University of Sciences and Technology (USTHB), Advanced Mechanic Laboratory (LMA), BP. 32, El-Alia, 16111 Bab-Ezzoaur, Algiers-Algeria

autor

Boukharouba T.

• Houari Boumediene University of Sciences and Technology (USTHB), Advanced Mechanic Laboratory (LMA), BP. 32, El-Alia, 16111 Bab-Ezzoaur, Algiers-Algeria

autor

Miroud D.

• Houari Boumediene University of Sciences and Technology (USTHB), Materials Science and Process Engineering Laboratory (LSGM), BP. 32, El-Alia,16111 Bab-Ezzoaur, Algiers-Algeria

Bibliografia

• [1] E. Bouarroudj, S. Chikh, S. Abdi, D. Miroud, App. Therm. Eng. 110, 1543-1553 (2017).
• [2] C.H. Muralimohan, V. Muthupandi, K. Sivaprasad, Procedia Material Science 5, 1120-1129 (2014).
• [3] A.J. Hassan, T. Boukharouba, D. Miroud, S. Ramtani, Int. J. Eng. Transactions B: Applications 32 (2), 284-291 (2019).
• [4] D.W. Mahaffey, O.N. Senkov, R. Shivpuri, S.L. Semiatin, Metall. Mater. Transactions A 47A, 3981-4000 (2016).
• [5] U. Raab, S. Levin, L. Wagner, C. Heinze, J. Mater. Process Technol. 215, 189-192 (2015).
• [6] P.S. Effertz, F. Fuchs, N. Enzinger, Int. J. Adv. Manuf. Technol. 92 (5-8), 2479-2486 (2017).
• [7] P. Myśliwiec, R.E. Śliwa, R. Ostrowski, Arch. Metall. Mater. 64 (4), 1385-1394 (2019).
• [8] T. Velmurugan, R. Subramanian, G. Suganya Priyadharshini, R. Raghu, Arch. Metall. Mater. 65 (2), 565-574 (2020).
• [9] A.J. Hassan, T. Boukharouba, D. Miroud, Acta Metall. Slovaca 26 (3), 78-84 (2020),
• [10] K.J. Quintana, J.L. Lopes Silveira, J. Manuf. Sci. and Eng. 139 (4), 041017-1-041017-8 (2017).
• [11] N. Titouche, T. Boukharouba, S. Amzert, A.J. Hassan, R. Lechelah, S. Ramtani, J. Manuf. Processes 41, 273-283 (2019).
• [12] X. Li, J. Li, F. Jin, Weld World 62, 923-930 (2018).
• [13] P.M. Ajith, T.M. Afsal Husain, P. Sathiya, S. Aravindan, J. Iron Steel Res. Int. 22 (10), 954-960 (2015).
• [14] M. Hazra, K.S. Rao, G.M. Reddy, J. Mater. Res. Technol. 3 (1), 90-100 (2014).
• [15] A. J. Hassan, T. Boukharouba, D. Miroud, China Welding 28 (1), 42-48 (2019).
• [16] G.I. Khidhir, S A. Baban, J. Mater. Res. Technol. 8 (2), 1926-1932 (2019).
• [17] I. Kirik, N. Ozdemir, Int. J. Mater Res. 104 (8), 769-775 (2013).
• [18] F.C. Liu, T.W. Nelson, Mater. Charact. 140, 39-44 (2018).
• [19] P. Sathiya, S. Aravindan, A. NoorulHaq, Int. J. Mech. Mater. Des. 3, 309-318 (2006).
• [20] N. Ozdemir, Mater. Lett. 59, 2504-2509 (2005).
• [21] R.A. Bell, J.C. Lippold, D.R. Adolphson, Weld. J. 325s-332s (1984).
• [22] J.C. Lippold, B.C. Odegard, Weld. J. 63 (1), 35s-38s (1984).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).