PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigation of Shrinkage Defect in Castings by Quantitative Ishikawa Diagram

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Metal casting process involves processes such as pattern making, moulding and melting etc. Casting defects occur due to combination of various processes even though efforts are taken to control them. The first step in the defect analysis is to identify the major casting defect among the many casting defects. Then the analysis is to be made to find the root cause of the particular defect. Moreover it is especially difficult to identify the root causes of the defect. Therefore, a systematic method is required to identify the root cause of the defect among possible causes, consequently specific remedial measures have to be implemented to control them. This paper presents a systematic procedure to identify the root cause of shrinkage defect in an automobile body casting (SG 500/7) and control it by the application of Pareto chart and Ishikawa diagram. with quantitative Weightage. It was found that the root causes were larger volume section in the cope, insufficient feeding of riser and insufficient poured metal in the riser. The necessary remedial measures were taken and castings were reproduced. The shrinkage defect in the castings was completely eliminated.
Rocznik
Strony
174--178
Opis fizyczny
Bibliogr. 17 poz., fot., rys., tab.
Twórcy
  • Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore, India
autor
  • Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore, India
autor
  • Department of Metallurgical Engineering, PSG College of Technology, Coimbatore, India
autor
  • Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore, India
  • Department of Mechanical Engineering, Sri Ramakrishna Institute of Technology, Coimbatore, India
Bibliografia
  • [1] Zhou, Gen. (2005). Analysis of Reasons Causing Riser Feeding Failure in Nodular Iron Castings Production. China Foundry. 2(2). 231-238. DOI: 1672-6421200504-0231-08.
  • [2] Chokkalingam, B. & Mohamed Nazirudeen, S.S. (2009). Analysis of Casting Defect Through Defect Diagnostic Study Approach. Journal of Engineering Annals of Faculty of Engineering Hunedoara. 72, 209-212.
  • [3] Juran, J.M., Godfrey. A.B. (1999). Juran’s Quality Handbook. Newyork: Mcgrawhill.
  • [4] Borowiecki, B., Borowiecka, O. & Szkodzinka, E. (2011). Casting Defect Analysis by The Pareto Method. Archives of Foundry Engineering. 11(3), 33-36.
  • [5] Gawdzinska, K. (2011). Application of the Pareto chart and Ishikawa diagram for the Identification of Major Defects in Metal Composite Castings. Archives of Foundry Engineering. 11(2), 23-28.
  • [6] White, S. & Raton, B. 7 Ways to Avoid Shrinkage Defects. Modern Castings. 103(2), 36-41.
  • [7] American Foundry Society.(2015). Analysis of Casting Defects. American Foundry Society. 117-120.
  • [8] American Foundry Society. (2008) Casting Defects Hand Book Iron and Steel. American Foundry Society 191-200.
  • [9] Chokkalingam, B., Ravichandran, B., Sanjith, V. & Sathyanarayanan, M. (2006). Controlling of Casting Defect Through Defect-Solving Technique. Indian Foundry Journal. 52(10), 34-38.
  • [10] Siekański, K. & Borkowski, S. (2003). Analysis of Foundry Defects and Preventive Activities for Quality Improvement of Castings. Metalurgija. 42(1), 57-59. DOI: 128479
  • [11] Li, J. & Liu, B. (1999). Study of Solidification Shrinkage of Ductile Iron in Dry Sand Moulds. Journal of Material Science and Technology. 15(3), 245-250.
  • [12] Alagarsamy, A. (2004). Defect Analysis Procedure and Case History. Ductile Iron News. 3.
  • [13] Bockus, S., Zaldarys, G. Venckunas, A. (2005). The Impact of Volume Shrinkage of Ductile Iron on the Feeder Size. Metals.
  • [14] Rao, R. T.V. (1996). Metal Casting Principles and Practice. New Age International Private Limited. 195-208.
  • [15] R. Ulewicz, (2003). Quality Control System in Production of the Castings from Spheroid Cast Iron. Metalurgija. 42(1). 61-63.
  • [16] Chokkalingam, B., Lakshmanan, & Sidarthan, L.M. (2006). Elimination of Defects and Increasing the Yield of a Ductile Iron Casting by Redesigning the Feeding System. Indian Foundry Journa. 52, 25-29.
  • [17] Ammerman, M. (1998). The Root Cause Analysis Hand Book. Productivity Press 63-78.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-daa39c92-0d84-478e-a7e0-d26da452fa76
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.