Characterization of selected Mg-based amorphous alloy

• Autorzy: Nowosielski R. , Kiljan A. , Guwer A. , Babilas R.
• Języki publikacji: EN

Abstrakty

EN

This paper describes results of chosen investigations of Mg-based amorphous alloy. The amorphous structure has been verified by X-ray diffraction method, SEM observations and thermal analysis. The investigations have been done on the glassy alloy Mg65Cu25Y10 in the form of plate which was obtained by copper mould pressure casting

Słowa kluczowe

EN

amorphous alloy; X-ray diffraction; thermal analysis; SEM

PL

stop amorficzny; dyfrakcja rentgenowska; analiza termiczna; SEM

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Selected Engineering Problems
• Rocznik: 2014
• Tom: nr 5
• Strony: 103--108
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Nowosielski R.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Kiljan A.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Guwer A.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

autor

Babilas R.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

Bibliografia

• 1.L. Brindley, Fixing bones with dissolvable glass, http://physicsworld.com.
• 2. Babilas R., Zajączkowski A., Głuchowski W., Nowosielski R., Preparation and glassforming ability of Mg-based bulk amorphous alloys, “Archives of Materials Science and Engineering” 2013, vol. 62 (2), pp. 78-86.
• 3. Collective work edited by R. O. Wielgosza, S. M. Pytla, The laboratory of metallurgy, Cracow University of Technology publishing, Cracow 2003.
• 4. J. Deputat, S. Mackiewicz, J. Szelążek, Problems and techniques of non-destructive testing of materials, Biuro Gamma publishing, Warsaw 2007.
• 5. M. Wojtas, Product defects detected by non-destructive methods, Biuro Gamma publishing, Warsaw 2006.
• 6. S. Mackiewicz, X-ray diffractometry in NDT - new European standards, National conference radiographic researches, 2005.
• 7. D. E. Newbury, D. C. Joy, Advanced Scanning Electron Microscopy and X-Ray Ricroanalysis, Plenum Publising Corporation, New Yoork 1986.
• 8. X.L. Zhang, G. Chen, T. Bauer, Mg-based bulk metallic glass composite with biocorrosion resistance and excellent mechanical properties, Intermetallics 29, 2012.
• 9. M. Szechyńska-Hebda, M. Hebda, Thermal analysis studies of materials biological, Technical Journal, Cracow Univeristy of Technology publishing, 2- /2011, pp. 227-234.
• 10. T. Rydzkowski, Researches of the structure of polymers the degree of crystallinity, Koszalin University of Technology publishing, 2008, pp. 143-148.
• 11. Ling-ling Shi, Hian Xu, Mg based bulk metallic glasses: Glass transition temperature and elasic properties versus toughness, Journal of Non-Crystalline Solids, 357, 2011, pp. 2.