Analysis of the Photoacoustic Helmholtz Resonator with Conical-Ended Duct

• Autorzy: Suchenek M.

Identyfikatory

DOI

10.1515/eletel-2017-0016

• Języki publikacji: EN

Abstrakty

EN

The acoustic properties of the photoacoustic Helmholtz cell can be improved by conical modification of the duct ends. The cone profile of the duct ends was studied, and according to the previous work, not all modifications of the parameters provide an increase of the Q-factor of the resonator. The aim of this work is to investigate the influence of the conical modification of the duct using a step-approximated model.

Słowa kluczowe

EN

Helmholtz resonator; influence of duct shape; conical duct model

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2017
• Tom: Vol. 63, No. 2
• Strony: 123--126
• Opis fizyczny: Bibliogr. 17 poz., rys., wykr.

Twórcy

autor

Suchenek M.

Bibliografia

• [1] R. Bauer, G. Stewart, W. Johnstone, E. Boyd, M. Lengden, "3D-printed miniature gas cell for photoacoustic spectroscopy of trace gases", Opt. Lett., vol. 39, iss. 16, 2014, pp. 4796-4799.
• [2] A. Miklós, P. Hess, Z. Bozóki, "Application of acoustic resonators in photoacoustic trace gas analysis", Rev. Sci. Instrum., 3 vol. 72, 2001, pp. 1937-1955.
• [3] M. Suchenek, "Model of the photoacoustic Helmholtz resonator with conical-ended duct", Int. J. Thermophys., vol. 35, iss. 12, 2014, pp. 2279-2286.
• [4] M. Suchenek, "Influence of the duct shape on the Q-factor of a photoacoustic Helmholtz resonator", Int. J. Thermophys., vol. 32, iss. 4, 2011, pp. 886-892.
• [5] R. Kastle, M. W. Sigrist, "Temperature-dependent photoacoustic spectroscopy with a Helmholtz resonator", Appl. Phys. B., vol. 63, iss. 4, 1996, pp. 389-397.
• [6] O. Nordhaus and J. Pelzl, "Frequency dependence of resonant photoacoustic cells: The extended Helmholtz resonator", Appl. Phys., vol. 25, iss. 3, 1981, pp. 221-229.
• [7] M. Mattiello, M. Nikles, S. Schilt, L. Thevenaz, A. Salhi, D. Bart, Y. Rouillard, R. Werner, J. Koeth, "Novel Helmholtz-based photoacoustic sensor for trace gas detection at ppm level GaInAsSb/GaAlAsSb DFB lasers", Spectrochemica Acta A, vol. 63, num. 5, 2006, pp. 952-958.
• [8] J. Pelzl, K. Klein, O. Nordhaus, "Extended Helmholtz resonator in low-temperature photoacoustic spectroscopy", Appl. Opt., vol. 21, iss. 1, 1982, pp. 94-99.
• [9] T. Starecki, "Loss-improved electroacoustical modeling of small Helmholtz resonators", J. Acoust. Soc. Am., vol. 122, iss. 4, 2007, pp. 2118-2123.
• [10] B. Parvitte, Ch. Risser, R. Vallon, V. Zéninari, "Quantitative simulation of photoacoustic signals using finite element modelling software", Appl. Phys. B, vol 111, iss. 3, 2013 pp. 383-389.
• [11] B. Kost, B. Baumann, M. Germer, M. Wolff, M. Rosenkranz, "Numerical shape optimization of photoacoustic resonators", Appl. Phys. B, vol. 102, iss. 1, 2011, pp. 87-93.
• [12] M. Suchenek, “Comparison of photoacoustic Helmholtz resonator models”, Proc. SPIE, vol. 6937, 2007, pp. 693710-1 - 693710-8.
• [13] R. Kastle, M. W. Sigrist, “Temperature-dependent photoacoustic spectroscopy with a Helmholtz resonator”, Appl. Phys. B., vol. 63, iss. 4, 1996, pp. 389-397.
• [14] M. Suchenek, "Model of the photoacoustic Helmholtz resonator with conical-ended duct", Int. J. Thermophys., vol. 35, iss. 12, 2014, pp. 2279-2286.
• [15] F. J. Young, "Impedance of Tapered Structures", J. Acoust. Soc. Am., vol. 39, no. 5, 1966, pp. 841-846.
• [16] F. J. Young, B. H. Young, "Impedance of Tapered Structures", J. Acoust. Soc. Am., vol. 33, no. 9, 1961, pp. 1206-1210.
• [17] F. J. Young, B. H. Young, "Smoothly and Step Tapered Structures", J. Acoust. Soc. Am., vol. 33, no. 6, 1961, pp. 813.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).