PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Model considering residual stiffness and stiffness discontinuity of bolted joints

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The nonlinear dynamic behavior has an important impact on energy dissipation and vibra- tion damping characteristics of bolted joints. Firstly, the development of tangential dynamic models is summarized and analyzed. Secondly, a five-parameter Iwan model based on a trun- cated power-law distribution is proposed. The backbone and hysteresis curves are obtained. Thirdly, normalized and dimensionless analysis is performed. On the basis of the above, a more concise four-parameter Iwan model with stiffness continuity is proposed. Finally, the validity of the model is verified by comparing the energy dissipation vs excitation force amplitude curve with the experimental data.
Rocznik
Strony
63--75
Opis fizyczny
Bibliogr. 18 poz., tab.
Twórcy
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
autor
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
autor
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
autor
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
autor
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
autor
  • College of Nuclear Science and Technology, Naval University of Engineering, Wuhan, China
Bibliografia
  • 1. Argatov I.I., Butcher E.A., 2011, On the Iwan models for lap-type bolted joints, International Journal of Non-Linear Mechanics, 46, 2, 347-356.
  • 2. Beards C.F., 1992, Damping in structure joints, Shock and Vibration Digest, 24, 3-7.
  • 3. Bickford J.H, 2007, Introduction to the Design and Behavior of Bolted Joints: Non-Gasketed Joints, CRC Press.
  • 4. Cao J., Liu Q., Hong J., 2020, A review of the micro-to-macro dynamics of bolted connection, China Mechanical Engineering, 1-14.
  • 5. Ferri A.A., 1995, Friction damping and isolation systems, Journal of Mechanical Design, 117, B, 196-206.
  • 6. Gaul L., Lenz J., 1997, Nonlinear dynamics of structures assembled by bolted joints, Acta Mechanica, 125, 1, 169-181.
  • 7. Goodman L.E., 1959, A Review of Progress in Analysis of Interfacial Slip Damping, https://books.google.pl/books?....
  • 8. Iwan W.D., 1966, A distributed-element model for hysteresis and its steady-state dynamic response, Journal of Applied Mechanics, 33, 4.
  • 9. Li D., Xu C., 2017, Iwan model considering normal load changes and its characteristics analysis, Journal of Harbin Institute of Technology, 49, 10, 138-144.
  • 10. Li Y., Hao Z., Zhang D., 2015, Research on Iwan model based on six-parameter non-uniform density function, Chinese Journal of Theoretical and Applied Mechanics, 47, 3, 513-520.
  • 11. Liu B., Dong X., Peng Z., 2020, Nonlinear equivalent model of bolted joint joint surface based on Iwan model, Noise and Vibration Control, 40, 2, 7-12.
  • 12. Mindlin R.D., 1949, Compliance of elastic bodies in contact, Journal of Applied Mechanics – ASME, 16, 259-268.
  • 13. Mindlin R.D., 1952, Effects of an oscillating tangential force on the contact surfaces of elastic spheres, Proceedings of 1st US National Congress of Applied Mechanics, ASME, New York, 203.
  • 14. Segalman D.J., Gregory D.L., Starr M.J., Resor B.R., Jew M.D., Lauffer J.P., Ames N.M., 2009, Handbook on Dynamics of Joints Structures, Technical Report SAND2009-4164, Sandia National Laboratories, NM, USA.
  • 15. Song Y., Hartwigsen C.J., McFarland D.M., Vakakis A.F., Bergman L.A., 2004, Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements, Journal of Sound and Vibration, 273, 1, 249-276.
  • 16. Wang D., Fan X., 2019, Dynamic analysis of hysteresis and nonlinear characteristics of connection interface, Journal of Vibration Engineering, 32, 6, 1060-1066.
  • 17. Zhang X., Wang B., Wei H., 2012, Non-linear restoring force and energy dissipation calculation of Iwan model, Engineering Mechanics, 29, 11, 33-39.
  • 18. Zhao B., Wu F., Sun K., Mu X., Zhang Y., Sun Q., 2021, Study on tangential stiffness nonlinear softening of bolted joint in friction-sliding process, Tribology International, 156, 106856.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d94ee5fc-860d-4f1d-b0e7-055cff6a606b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.