Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In-situ thermal upgrading modification technology is of great significance to lignite utilisation cleanly. It is an extremely complex multi-field coupling process. Therefore, it is necessary to study the physical properties of lignite under the thermo-mechanical coupling function. In this paper, the lignite pore evolution characteristics under thermal-mechanical co-function have been obtained at different scales based on experimental results. The mechanisms also have been deeply studied. The results indicated that lignite total porosity first increased and then decreased as the temperature increased from 23°C to 400°C under the triaxial stress of 7 MPa. The maximum value of 21.64% for the total porosity of lignite was observed at 200°C. Macropores were dominant when the temperature was lower than 100°C, while visible pores were dominant when at temperatures ranging from 100~400°C. The thermal weight loss and deformation characteristics of lignite were further studied using a thermal-mechanical testing platform. The weight loss and deformation process could be divided into three stages, namely the slow, rapid, and relatively slow stages. After being continuously pyrolysed for 5 hours at a temperature of 400°C, the maximum weight loss rate of lignite was 52.38%, the maximum axial linear strain was 11.12%, and the maximum irrecoverable radial strain was 18.79%. The maximum axial thermal deformation coefficient of lignite was −2.63×10 −4℃ −1 at a temperature of 289°C. Macro-deformation and component loss were the main mechanisms of lignite structure evolution.
Wydawca
Czasopismo
Rocznik
Tom
Strony
671--684
Opis fizyczny
Bibliogr. 32 poz., rys., tab., wykr.
Twórcy
autor
- Shanxi Institute of Energy, China
Bibliografia
- [1] X.H. Fu, L. Lu, Y.Y. Ge, J.J. Tian, P.P. Luo, China Lignite Resources and Physical Features. Coal Science and Technology 40, 10, 104-107+112 (2012).
- [2] V.Ş. Ediger, I. Berk Kösebalaban A, Lignite resources of Turkey: Geology, reserves, and exploration history. International Journal of Coal Geology 132,13-22 (2014).
- [3] A. Tajduś ,S. Tokarski, Risks related to energy policy of Poland until 2040 (EPP 2040). Archives of Mining Sciences 65, 4, 877-899 (2020).
- [4] D. Vrublová, R. Kapica, S. Smelik, M. Smeliková, Real-time positioning of equipment and material tracking of waste streams in surface coal mining – a case study. Archives of Mining Sciences 66, 2, 249-264 (2021).
- [5] S.M. Pathan, A.G. Pathan, F.I. Siddiqui, M.B. Memon, M.H.A.A. Soomro, Open pit slope stability analysis in soft rock formations at Thar coalfield Pakistan. Archives of Mining Sciences 67, 3, 437-454 (2022).
- [6] Y.S. Zhao, Multi-field coupling action and engineering response of porous media. Beijing: Science Press, 2010.
- [7] Y.S. Zhao, F. Qu, Z.J. Wan, Y. Zhang, W.G. Liang, Q.R. Meng, Experimental Investigation on Correlation Between Permeability Variation and Pore Structure During Coal Pyrolysis. Transport in Porous Media 82, 2, 401-412 (2009).
- [8] H.P. Xie, Y. Ju, M.Z. Gao, F. Gao, J.Z. Liu, H.W. Ren, S.R. Ge, Theories and technologies for in-situ fluidized mining of deep underground coal resources. Journal of China Coal Society 43, 5, 1210-1219 (2018).
- [9] Y.M. Yu, Y.Q. Hu, W.G. Liang, Q.R. Meng, Z.C. Feng, Study on pore characteristics of lean coal at different temperature by CT technology. Chinese Journal of Geophysics 55, 2, 637-644 (2012).
- [10] Z.X. Mi, F.G. Wang, N. Shi, J.Z. Yu, Z.J. Sun, Experimental study on effect of multi-stage stress variations on permeability and pore structure of sandstone. Chinese Journal of Geotechnical Engineering 43, 5, 1210-1219 (2018).
- [11] Z.J. Wu, L.F. Fan, Q.S. Liu, G.W. Ma, Micro-mechanical modeling of the macro-mechanical response and fracture behavior of rock using the numerical manifold method. Engineering Geology 225, 49-60 (2017).
- [12] S.W. Niu, Y.S. Zhao, Y.Q. Hu, Experimental Investigation of the Temperature and Pore Pressure Effect on Permeability of Lignite Under the In Situ Condition. Transport in Porous Media 101, 1, 137-148 (2013).
- [13] L. Zhang, S. Chen, C. Zhang, X.Q. Fang, S. Li, The characterization of bituminous coal microstructure and permeability by liquid nitrogen fracturing based on μCT technology. Fuel 262, 116635 (2020).
- [14] G.L. Zhang, P.G. Ranjith, H.E. Huppert, Direct evidence of coal swelling and shrinkage with injecting CO2 and N2 using in-situ synchrotron xray microtomography, Engineering 18, 11, 88-95 (2022).
- [15] L.J. Dong, Q.C. Hu, X.J. Tong,Y.F. Liu, Velocity-free MS/AE source location method for three-dimensional holecontaining structures. Engineering 6, 7, 827-834 (2020).
- [16] Y. Sun, C. Zhai, J.Z. Xu, L. Qin, W. Tang, A method for accurate characterisation of the pore structure of a coal mass based on two-dimensional nuclear magnetic resonance T1-T2. Fuel 262, 116574 (2020).
- [17] Y.M. Yu, W.G. Liang, Y.Q. Hu, Q.R. Meng, Study of micro-pores development in lean coal with temperature. International Journal of Rock Mechanics and Mining Sciences 51, 91-96 (2012).
- [18] Q.R. Meng, Y.S. Zhao, Y.M. Yu, Y.Q. Hu, Micro-CT experimental study of crack evolution of lignite under different temperatures. Chinese Journal of Rock Mechanics and Engineering 29, 12, 2475-2483 (2010).
- [19] T. Meng, J.L. Xie, X.M. Li, J.W. Ma, Y. Yang, Experimental study on the evolutional trend of pore structures and fractal dimension of low-rank coal rich clay subjected to a coupled thermo-hydro-mechanical-chemical environ ment. Energy 203, 117838 (2020).
- [20] J. Tomeczek, S. Gil, Volatiles release and porosity evolution during high pressure coal pyrolysis. Fuel 82, 285-292 (2003).
- [21] Y.Y. Li, H.Q. Cui, P. Zhang, D.K. Wang, J.P. Wei, Three-dimensional visualization and quantitative characterization of coal fracture dynamic evolution under uniaxial and triaxial compression based on μCT scanning. Fuel 262, 116568 (2020).
- [22] Z.J. Feng, Z.J. Wan, Y.S. Zhao, G.W. Li, Y. Zhang, C. Wang, Experimental investigation into deformation characteristics of anthracite under thermal-mechanical coupling conditions. Chinese Journal of Rock Mechanics and Engineering 29, 08, 1624-1630 (2010).
- [23] Z.J. Wan, Z.J. Feng, Y.S. Zhao, Y. Zhan, G.W. Li,C.B. Zhou, Elastic modulus’s evolution law of coal under high temperature and triaxial stress. Journal of China Coal Society 36, 10, 1736-1740 (2011).
- [24] J.T. Zhang, R.K. Shi, B. Niu, H.Q. Hu, S.R. Liang, H.B. Zhong, Effect of CH4 atmosphere on tar yield and quality in coal pyrolysis at low-medium pyrolysis temperature. Journal of China Coal Society 46, 1, 292-299 (2021).
- [25] Q. Zhou, Experimental study on the pyrolysis of Xinjiang Naomaohu coal in a moving bed with baffled internals. Journal of China Coal Society 46, 12, 4054-4062 (2021).
- [26] В.В. Hodot, S.Z. Song, Y.A. Wang, Outburst of coal and coalbed gas. Beijing: China Industry Press (1966).
- [27] K.C. Xie, Coal structure and its reactivity. Beijing: Science Press (2002).
- [28] S.W. Niu, Investigation of Pyrolysis and Thermostatic Weight Loss Properties of Lignite. Coal Technology 34, 12, 263-264 (2015).
- [29] D.J. Xue, B. Hu, Y. Fang, Z. Zhuo, H.W. Zhou, Paths on thermal-mechanical coupling failure of meso-scale granite under uni-axial tension and numerical analysis. Journal of China Coal Society 41, 09, 2212-2222 (2016).
- [30] Y.D. Geng, W.G. Liang, J. Liu, Z.Q. Kang, P.F. Wu, Y.L. Jiang, Experimental study on the variation of pore and fracture structure of oil shale under different temperatures and pressures. Chinese Journal of Rock Mechanics and Engineering 37, 11, 2510-2519 (2018).
- [31] Q. Qian, Mechanical property weakening and micro structure evolution of glauberite under different leaching temperature [Dissertation]. Taiyuan University of Technology, P.30, 2017.
- [32] Q.R. Meng, Y.S. Zhao, Y.Q. Hu, Z.C. Feng, S.G. Xu, Micro-CT experimental of the thermal cracking of brown coal. Journal of China Coal Society 36, 05, 855-860 (2011).
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d920ca8f-01ba-4cca-9cd5-478940f7edbb