PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Universal approach for risk identification and evaluation in underground facilities

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Underground laboratories provide a unique environment for various industries and are the perfect place for developing new technologies for mining, geophysical surveys, radiation detection as well as many other studies and measurements. Unfortunately working in underground excavations is associated with exposure to many hazards not encountered in the laboratories located on the surface. Water inflow, gas burst, roof fall and even seismic hazards translate into high accident rates in the underground mining industry across the globe. Therefore, to minimise the risk of serious accidents, a lot of research investigations related to the development of effective risk assessment procedures are being carried out. One of the initiatives aimed at improving the work safety in underground laboratories in the Baltic Sea Innovation Network project implemented under the Interreg Baltic Sea Region Programme. This study presents the process of compiling a database on hazards within underground laboratories. Finally, a proposal of unification of the procedure for risk assessment, including methods for determining the likelihood and potential impact of unwanted events has been developed.
Czasopismo
Rocznik
Tom
Strony
165--181
Opis fizyczny
Bibliogr. 35 poz., rys.
Twórcy
autor
  • Wrocław University of Science and Technology, Wrocław, Poland
  • KGHM CUPRUM Ltd. Research & Development Centre, Wrocław, Poland
  • Wrocław University of Science and Technology, Wrocław, Poland
  • KGHM CUPRUM Ltd. Research & Development Centre, Wrocław, Poland
autor
  • University of Silesia, Katowice, Poland
autor
  • University of Oulu, Oulu, Finland
  • University of Oulu, Oulu, Finland
  • Karelian Research Centre of the Russian Academy of Sciences, Russia
Bibliografia
  • AVEN T., 2010, On how to define, understand and describe risk, Reliability Engineering and System Safety, 2010, Vol. 95 (6), pp. 623–631, https://doi.org/10.1016/j.ress.2010.01.011
  • CICHOŃ-WALCZYK M., 2012, The method of reporting work-related incidents used in Orica as part of preventive health and safety in the workplace, Prace Naukowe Instytutu Górnictwa Politechniki Wrocławskiej Nr 134 (41), pp. 43–53.
  • CLEMENS P.L., SIMMONS R.J., 1998, System Safety and Risk Management, NIOSH Instructional Module, A guide for Engineering Educators, Cincinnati.
  • CLIFTON A., ERICSON II, 2015, Hazard Analysis Techniques for System Safety, 2nd Edition, 2015, ISBN: 978-1-118-94038-9.
  • CURTIS P., CAREY M., 2012, Risk Assessment in Practice. Deloitte & Touche LLP.
  • DHILLON B.S., 2010, Mine Safety A Modern Approach – Global Mine Accidents. In: Mine Safety, Springer Series in Reliability Engineering, pp. 59–71, DOI: 10.1007/978-1-84996-115-8.
  • DUMBRAVĂ V., VLĂDUŢ-SEVERIAN I., 2013, Economics and Information Technology Using Probability – Impact Matrix in Analysis and Risk Assessment Project, Journal of Knowledge Management, 2013, Special Issue, December, pp. 76–96.
  • FENTON G.A., GRIFFITHS D.V., 2008, Risk assessment in geotechnical engineering, John Wiley & Sons, Inc., New Jersey, DOI: 10.1002/9780470284704.
  • FUŁAWKA K., PYTEL W., MERTUSZKA P., 2018, The effect of selected rockburst prevention measures on seismic activity – Case study from the Rudna copper mine, Journal of Sustainable Mining, Vol. 17, pp. 1–10, https://doi.org/10.1016/j.jsm.2018.03.001
  • GALVIN J., 2017, Critical role of risk management in ground engineering and opportunities for improvement, International Journal of Mining Science and Technology, Vol. 27 (5), pp. 725–731, ISSN 2095-2686, https://doi.org/10.1016/j.ijmst.2017.07.005
  • GHORBANI S., NAMIN F.S., LAJEVARDI S.A., 2017, A Statistical-Probabilistic Pattern for Determination of Tunnel Advance Step by Quantitative Risk Analysis, Int. Journal of Mining and Geoengineering, 2017, Vol. 51 (2), pp. 161–176, DOI: 10.22059/IJMGE.2017.230636.594663.
  • GROVES W.A., KECOJEVIC V.J., KOMLJENOVIC D., 2007, Analysis of fatalities and injuries involving mining equipment, Journal of Safety Research, Vol. 38 (4), pp. 461–470, ISSN 0022-4375, https://doi.org/10.1016/j.jsr.2007.03.011
  • IDRIS M.A., SAIANGAND D., NORDLUND E., 2011, Probabilistic analysis of open stope stability using numerical modelling, Int. J. Mining and Mineral Engineering, Vol. 3 (3), pp. 194–219, https://doi.org/10.1504/IJMME.2011.043849
  • IEC 31010:2009 – Risk management – Risk assessment techniques.
  • IEC 60812, Edition 2.0 2006-01, Analysis techniques for system reliability – Procedure for failure mode and effects analysis (FMECA).
  • ISO Guide 73:2009, Risk management – Vocabulary.
  • KENNETH J. ROTHMAN, 2002, Epidemiology – An Introduction, Oxford University Press, pp. 34–36.
  • KOMLJENOVIC D., GROVES W.A., KECOJEVIC V.J., 2008, Injuries in U.S. mining operations – A preliminary risk analysis, Safety Science, Vol. 46 (5), pp. 792–801, ISSN 0925-7535, https://doi.org/10.1016/j.ssci.2007.01.012
  • LI T., CAI M.F., CAI M., 2007, A review of mining-induced seismicity in China, International Journal of Rock Mechanics and Mining Sciences, Vol. 44 (8), pp. 1149–1171.
  • MARTYKA J., 2015, Stan kultury bezpieczeństwa dozoru Zakładów Górniczych KGHM Polska Miedź S.A. oraz program doskonalenia kultury bezpieczeństwa załóg górniczych (Safety culture state of supervision in mining plant of KGHM Polska Miedź S.A. and program to improve safety culture of mining Staff ), CUPRUM – Czasopismo Naukowo-Techniczne Górnictwa Rud, 2015, Vol. 3 (76), pp. 233–251.
  • PARK H.J., WEST T.R., WOO I., 2005, Probabilistic analysis of rock slope stability and random properties of discontinuity parameters, Interstate Highway 40, Western North Carolina, USA, Engineering Geology, Vol. 79 (3–4), pp. 230–250, https://doi.org/10.1016/j.enggeo.2005.02.001
  • Project Management Institute 2013, Inc., A Guide to the Project Management Body of Knowledge (PMBOK® Guide) – Fifth Ed., 2013, Project Management Institute, Inc., Newtown Square, Pennsylvania.
  • RADU L.D., 2009, Qualitative, Semi-Quantitative and Quantitative Methods for Risk Assessment: Case of the Financial Audit, Analele Stiintifice ale Universitatii “Alexandru Ioan Cuza” din Iasi – Stiinte Economice, Vol. 56, pp, 643–657.
  • RocScience – Probabilistic Analysis in RS2, 2018.
  • SANMIQUEL L., FREIJO M., EDO J., ROSSELL J.M., 2010, Analysis of work related accidents in the Spanish mining sector from 1982–2006, Journal of Safety Research, Vol. 41 (1), pp. 1–7, ISSN 0022-4375, https://doi.org/10.1016/j.jsr.2009.09.008
  • SHOOKS M., JOHANSSON B., ANDERSSON E., LÖÖW J., 2014, Safety and Health in European Mining – A report on safety and health, statistics, tools and laws, produced for the I2 Mine (Innovative Technologies and Concepts for the Intelligent Deep Mine of the Future) project, Division of Human Work Science, Skandinaviens nordligaste tekniska universitet Forskning & utbildning i världsklass, pp. 3–10.
  • SMOLARKIEWICZ M., SMOLARKIEWICZ M.M., BIEDUGNIS S., 2011, Matrix methods for risk management – Associated Matrices Theory, Środkowo-Pomorskie Towarzystwo Naukowe Ochrony Środowiska, Vol. 13. pp. 241–252.
  • SUDDLE S., 2009, The weighted risk analysis, Safety Science, Vol. 47 (5), pp. 668–679, DOI: 10.1016/j.ssci.2008.09.005.
  • SZURGACZ D., 2015, Numerical analysis for an optimization of a powered roof support operating in hazard conidtions of minig tremors, Mining Science, Vol. 22, pp. 171–179.
  • UNISDR, 2004, Living with risk – a global review of disaster reduction initiatives.
  • VARDAR O., ZHANG C., CANBULAT I., HEBBLEWHITE B., 2018, A semi-quantitative coal burst risk classification system, International Journal of Mining Science and Technology, Vol. 28 (5), pp. 721–727, ISSN 2095-2686, https://doi.org/10.1016/j.ijmst.2018.08.001
  • Webpage of Occupational Safety and Health Administration, https://www.osha.gov (access in 2018).
  • YANG C., HONGGUANG J., TIANBAO Z., 2018, Blasting control and monitoring system for safety improvement during blasting operation – a case study in guilaizhuang gold mine, Mining Science, Vol. 25, pp. 33–48, DOI: 10.5277/msc182504.
  • ZEROUAL NÉE DADOUCHE F., IAZHARB B., ZENNIRC A., 2011, Probabilistic analysis of slope stability towards the slip by the kinematic method, Physics Procedia, Vol. 21, pp. 93–100, https://doi.org/10.1016/j.phpro.2011.10.014
  • ZORYCHTA A., BURTAN Z., 2012, Conditions of fault activation in the area of exploitation, AGH Journal of Mining and Geoengineering, Vol. 36 (3), pp. 509–519.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d91860d8-66fe-49ad-8c23-ecf52a106ec4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.