Prosthetic treatment protocol with fixed dental constructions made on 3D printed cast patterns

• Autorzy: Dzhendov D. , Katreva I. , Dikova T.

Identyfikatory

DOI

10.5604/01.3001.0012.0611

• Języki publikacji: EN

Abstrakty

EN

Purpose: of the present paper is to develop prosthetic treatment protocol for fixed partial dentures made of 3D printed cast patterns. Design/methodology/approach: The clinical and laboratory protocols for manufacturing of fixed prosthetic constructions upon 3D cast patterns are developed on the basis of the literature review and our previous experimental investigations. Comparison between the conventional technique and innovative approach is made. Findings: The terms "semi-digital treatment plan" and "fully digital treatment plan" are defined according to the way of obtaining data for the virtual 3D model and the production method of the fixed prostheses. A classification of treatment protocols with non-removable partial dentures produced by additive technology is developed. Protocols for "semi" and "fully" digitized treatment plans with fixed partial dentures made by casting with 3D printed models are created. Research limitations/implications: Implementation of the fully digitized protocol for manufacturing of fixed prosthetic constructions via 3D printed prototypes requires specific equipment in the dental office and dental technician laboratory - intraoral scanner and CAD/ CAM system with 3D printing machine. Practical implications: Establishing of systematic clinical and laboratory protocols helps dental specialists to implement the innovative working approach in their practice with no risk of neglecting or omitting of some important procedures which increases the quality and long lasting effect of the dental constructions. Originality/value: Following the developed protocols reduces the role of the subjective factor in production technology of fixed prosthetic constructions while saving labour and time.

Słowa kluczowe

EN

materials; biomaterials; 3D printing; treatment protocol; cast pattern

PL

materiały; biomateriały; drukowanie 3D

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2018
• Tom: Vol. 90, nr 1
• Strony: 33--40
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Dzhendov D.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

autor

Katreva I.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

autor

Dikova T.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

Bibliografia

• [1] Hr. Kisov, Keramichni faseti, Klinichen i laboratoren protocol, Neprekusnato usuvurshenstvane, Sofia, 2008, 184 (in Bulgarian).
• [2] T. Peev, A. Filchev, Klinika na protetichnata dentalna medicina, Eko Print, Sofia, 2008, 272 (in Bulgarian).
• [3] A.A. Grant, J.R. Heath, J.F. Me Cord, Complete Prosthodontics: Problems, Diagnosis and Management, 4th Edition, Wolfe, London, 1994
• [4] N.B. Kassim, New technique of producing removable complete denture using rapid tooling approach, MsC thesis, Faculty of Mechanical and Manufacturing Engineering, University Tun Hussein Onn, Malaysia, 2012,53.
• [5] N. Popov, T. Likov, G. Georgiev, Klinika na ortopedichnata stomatologia, Uchebnik za studenti po stomatologia, N. Popov (Ed.), Medicina i fizkultura, Sofia, 1984, 352 (in Bulgarian).
• [6] T. Dikova, D. Dzhendov, M. Simov, I. Katreva- Bozukova, S. Angelova, D. Pavlova, M. Abadzhiev, T. Tonchev, Modem Trends in the Development of the Technologies for Production of Dental Constructions, Journal of IMAB 21/4 (2015) 974¬981.
• [7] P. Malara, L.B. Dobrzański, J. Dobrzańska, Computer-aided designing and manufacturing of partial removable dentures, Journal of Achievements in Materials and Manufacturing Engineering 73/2 (2015) 157-164.
• [8] P. Malara, L.B. Dobrzański, Designing and manufacturing of implant prosthetic fixed suprastructures in edentulous patients on the basis of digital impressions, Archives of Materials Science and Engineering 76/2 (2015) 163-171.
• [9] B. Vandenbroucke, J-P. Kruth, Selective laser melting of biocpmpatabile metals for rapid manufacturing of medical parts, Rapid Prototyping Journal 13/4 (2007) 196-203.
• [10] WO 2006079188 Al, Procedure for design and production of implant-based frameworks for complex dental prostheses, PCT number PCT/BE2006/000005, Publication date Oct 31, 2007, Inventors J.-P. Kruth, I. Naert, B. Vandenbroucke.
• [11] E-manufacturing solutions, Dental, EOS GmbH, Electro Optical Systems, Krailling/Munich, 10 p., Available from: www.eos.info, Access in: 28.05.2016.
• [12] T. Dikova, D. Dzhendov, K. Bliznakova, D. Ivanov, Application of 3D Printing in Manufacturing of Cast Patterns, in: S. Cvetkovski, G. Nacevski (Eds.), Proceedings of the VIIth International Metallurgical Congress, Ohrid, Macedonia, 2016, CD-ROM.
• [13] T. Dikova, D. Dzhendov, I. Katreva, D. Pavlova, Accuracy of polymeric dental bridges manufactured by stereolithography. Archives of Materials Science and Engineering 78/1 (2016) 29-36.