Quality management of aluminum pistons with the use of quality control points

• Autorzy: Ostasz Grzegorz , Czerwińska Karolina , Pacana Andrzej

Identyfikatory

DOI

10.2478/mspe-2020-0005

• Języki publikacji: EN

Abstrakty

EN

The publication analyses the way of managing and improving the quality of the production process of aluminum pistons for internal combustion engines. The aim of the article is to propose a method of analysis of the effectiveness of individual control methods used in the process of controlling the aluminium piston. Thanks to the location of a control point with the highest share of product non-compliance detection in the production process, it is possible to reduce quality control points by less effective points, which will contribute to lower costs or shorten the time of production processes. In view of the increasing demands on the efficiency of the checkpoints for components in internal combustion engines, the issue is important and topical.

Słowa kluczowe

EN

aluminum piston; non-destructive testing; production process; quality control point; quality management

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2020
• Tom: nr 1 (28)
• Strony: 29--33
• Opis fizyczny: Bibliogr. 26 poz., rys., tab.

Twórcy

autor

Ostasz Grzegorz

• Rzeszow University of Technology Faculty of Management Aleja Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Czerwińska Karolina

• Rzeszow University of Technology Faculty of Mechanical Engineering and Aeronautics Aleja Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Pacana Andrzej

• Rzeszow University of Technology Faculty of Mechanical Engineering and Aeronautics Aleja Powstańców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1] Achcar J., Piratelli C., de Souza R., Modeling quality control data using Weibull distributions in the presence of a change point, The International Journal of Advanced Manufacturing Technology, No 66, 2013.
• [2] Belov N.A., Naumowa E. A., Eskin D.G., Casting alloys of the Al-Ce-Ni system: microstructural approach to alloy design. Materials Science and Engineering, A271, (1999), 134-142.
• [3] Burtan A., Wolniak R., Decission process based on attribute control charts in the automotive industry, „Technická Diagnostyka”, nr 1 2013.
• [4] Chang AS.: Control points and measures of a quality process, International Journal of Materials and Product Technology, Vol. 20, 2004.
• [5] Chokkalingam B., et al., Investigation of Shrinkage Defect in Castings by Quantitative Ishikawa Diagram, Archives of Foundry Engineering, vol 17, 1(2017), 174-178.
• [6] Documents provided by Federal Mogul Gorzyce. Unpublished materials, Gorzyce, 2014.
• [7] Duncan, A., Quality Control and Industrial Statistics. 5th Edition, Irwin, Homewood 1986.
• [8] Evans J., Lindsay W., The management and control of quality. South-Western Cengage Learning, 2010. http://books.google.com.br/books?id=FbM8RAAACAAJ (accessed: 01.06.2019).
• [9] Feigenbaum A., Total quality control. In: Industrial engineering series. McGraw-Hill, 1991. http://books.google.com.br/books?id=B9FTAAAAMAAJ. (accessed: 01.06.2019).
• [10] Gryna F., Juran J., (2001) Quality planning and analysis: from product development through use. In: McGraw-Hill series in industrial engineering and management science. McGraw-Hill, 2001. http://books.google.com.br/books?id=xjUfAQAAIAAJ (accessed: 02.06.2019).
• [11] Liu MZ., Zhao ZB., Jiang ZQ., Ge MG., Ling L., Luo Y., Wang XQ., Research of Correlation-Model between Qualities Attributes and Quality Control Points in Assembly Process of the Complex Product Based on Network Flow, Advanced Materials Research (Volumes 403-408), 2011.
• [12] Lukić D., Todić V., Milošević M., Model of modern technological production preparation. Proceedings in Manufacturing Systems 5 (2010), 1, 15-22. 8.
• [13] Malindzak D. et.al. An effective model for the quality of logistics and improvement of environmental protection in a cement plant. Przemysł Chemiczny, Volume: 96, Issue: 9, Pages: 1958-1962, 2017.
• [14] Mazur, M., Zapewnienie jakości w procesach wytwórczych części samochodowych, Archiwum Wiedzy Inżynierskiej, Nr 1, 2017, 63-67.
• [15] Moharana B., Kushwaha B.K., FEM analysis of stress Predication of Aluminum wire rod in Drawing Operation, International Research Journal of Engineering and Technology 4 (2017)12, 982-992
• [16] Montgomery D., Montgomery E., Reviews CT., Introduction to statistical quality control. In: Cram101 textbook outlines, 2006. Academic Internet Publ. http://books.google.com.br/books?id=l4GnPQAACAAJ. (accessed: 02.06.2019).
• [17] Pacana A., Czerwińska K., Siwiec D., Narzędzia i wybrane metody zarządzania jakością. Teoria i praktyka, Oficyna Wydawnicza Stowarzyszenia Menadżerów Jakości i Produkcji, Częstochowa 2018.
• [18] Pacana A., et al.: The study of stickiness of packaging film by Shainin method, Przemysł Chemiczny, Volume: 94, Issue: 8, Pages: 1334-1336, 2015.
• [19] PN-EN ISO 22000:2006 System zarządzania bezpieczeństwem żywności; PKN; Warszawa 2006.
• [20] Schilling E., Neubauer D., (2009) Acceptance sampling in quality control. Statistics, textbooks and monographs, 2009, http://books.google.com.br/books?id=Ryv1EGIkAaYC. (accessed:02.06.2019).
• [21] Stoma, M., Rodzeń, A., Dudziak, A., Rydzak, L., Wymagania systemu zarządzania jakością w przemyśle motoryzacyjnym jako determinant jakości producji, Zeszyty Naukowe Politechniki Śląskiej: Organizacja i Zarządzanie, Wydawnictwo Politechniki Śląskiej w Gliwicach, 2018.
• [22] Tisza M.: Physical Metallurgy for Engineers. ASM International and Freund Publishing House Ltd, London – Tel Aviv (2002), 356.
• [23] Urbaniak M.: Zarządzanie jakością. Teoria i praktyka; Difin; Warszawa 2004.
• [24] Wolniak R., Skotnicka B.: Metody i narzędzia zarządzania jakością – Teoria i praktyka cz. 1, Wydawnictwo Naukowe Politechniki Śląskiej, Gliwice 2011.
• [25] Vukelja E.K., Duplančič I., Lela B.: Continuous roll casting of aluminium alloys– casting parameters analysis, Metalurgija 49 (2010)2, 115-118.
• [26] Zheng Y., Li AM., Liu JJ., Wang SH., Modeling of Quality Control Points of Equipment Maintenance Process, International Conference On Quality, Reliability, Risk, Maintenance, And Safety Engineering, 2012.