Experimental verification of design calculations of the internal combustion engine cooling system

• Autorzy: Worsztynowicz Barbara

Identyfikatory

DOI

10.19206/CE-2019-421

• Języki publikacji: EN

Abstrakty

EN

The article presents a comparative analysis of calculation results and measurement results of cooling module built on the basis of design calculations. The computations were made in software dedicated to the calculations of heat exchangers. The measurements were performed on a cooling system mounted in a special purpose vehicle together with a combustion engine, which was loaded by an engine dynamometer. Based on the comparison between input data for calculations and results of measurements, differences were found, therefore changes were proposed to be made in the model.

Słowa kluczowe

EN

cooling system; combustion engine; designing; numerical calculation

PL

układ chłodzenia; silnik spalinowy; projektowanie; obliczenia numeryczne

• Wydawca: Polskie Towarzystwo Naukowe Silników Spalinowych
• Czasopismo: Combustion Engines
• Rocznik: 2019
• Tom: R. 58, nr 4
• Strony: 132--135
• Opis fizyczny: Bibliogr. 2 poz., il. kolor., wykr.

Twórcy

autor

Worsztynowicz Barbara

• Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology

Bibliografia

• [1] WORSZTYNOWICZ, B. The influence of fuel type on the cooling system heat exchanger parameters in heavy - duty engines. Scientific Conference on Automotive Vehicles and Combustion Engines (KONMOT 2016) IOP Conf. Series: Materials Science and Engineering. 2016, 148, 012080.
• [2] WORSZTYNOWICZ, B. The influence of the drive type in city bus on the cooling system parameters. Scientific Conference on Automotive Vehicles and Combustion Engines (KONMOT 2018) IOP Conf. Series: Materials Science and Engineering. 2018, 421, 042084.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).