Corrosion influence on safety of hydraulic pipelines installed on decks of contemporary product and chemical tankers

• Autorzy: Banaszek A. , Łosiewicz Z. , Jurczak W.

Identyfikatory

DOI

10.2478/pomr-2018-0056

• Języki publikacji: EN

Abstrakty

EN

The corrosion influence on hydraulic pipelines safety mounted on product and chemical tankers has been presented in this paper. The issue of axial forces in pipelines mounted along ship open decks, resulting from ship hull deformations in waves, is highlighted. Corrosion degradation phenomena of hydraulic pipelines on open deck is described. The analysis of degradation effect on thickness of carbon steel material of pipes is given and influence of the effect on stress level increase in hydraulic pipelines during exploitation at sea is focused. The discussion about fighting against corrosion in hydraulic pipelines on open decks is performed. All the problems analyzed in the paper are based on examples of events observed on product and chemical tankers built in Szczecinska Shipyard, Szczecin, Poland.

Słowa kluczowe

EN

corrosion; safety; hydraulic pipelines; Huber-Mises stresses; product and chemical tanker

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2018
• Tom: nr 2
• Strony: 71--77
• Opis fizyczny: Bibliogr. 23 poz., rys., tab.

Twórcy

autor

Banaszek A.

• West Pomeranian University of Technology Faculty of Maritime Technology and Transport Al. Piastów 41 71-065 Szczecin Poland

autor

Łosiewicz Z.

• West Pomeranian University of Technology Faculty of Maritime Technology and Transport Al. Piastów 41 71-065 Szczecin Poland

autor

Jurczak W.

• Naval Academy Mechanical-Electric Faculty, Śmidowicza 69 81-127 Gdynia Poland

Bibliografia

• 1. A.Banaszek:The selected elements of designing and operation of hydraulic central power supply systems on modern product and chemical tankers (in Polish). West Pomeranian University of Technology Press, Szczecin 2013, pp. 259,
• 2. A.Banaszek, R.Petrovic:FEM analysis of pipe material temperature changes influence on line expansion loops in hydraulic installation mounted on modern product and chemical tankers. Thermal Science (Vinci) No. 4/2013
• 3. A.Banaszek: The concept of central hydraulic loading system on board product and chemical tankers. First International Conference „Ship machines and equipment operation”, Świnoujście-Ystad-Copenhagen 2003, Zeszyty Naukowe Wyższej Szkoły Morskiej No. 68, Szczecin 2003
• 4. A.Banaszek: Liquid cargo installation systems analysis on product and chemical tankers (in Polish). Report of Baltecologicalship Research Project KBN Eureka 4-0000432/14-01-00/Contract No. 1518/2002,, Szczecin 2002
• 5. A.Banaszek: The concept of capacity control of submerged cargo pumps in liquid cargoes transport at sea. Marine Technology Transactions, Vol.16, Polish Academy of Sciences, Branch in Gdansk, 2005
• 6. A.Banaszek: Big power central hydraulic loading systems on board product and chemical tankers. The 19th International Conference on Hydraulics nad Pneumatics, Prague, Czech Republic, 30-31 May 2006
• 7. A.Banaszek: Central hydraulic loading systems used on board product and chemical tankers (in Polish). Hydraulika i Pneumatyka No. 4/2003
• 8. Herbert H., Uhlig E.: The corrosion handbook, John Wiley and Sons Inc. New York 1969
• 9. Sandwith C.J., Clark R.C. Marine Corrosion of Selected Small Wire Ropes and Strains, Journal IEEE Ocean ‘ 75 pp. 148-154
• 10. Bhandari J., Faisal Khan b, Rouzbeh Abbassi a, Vikram Garaniya a, Roberto Ojeda: Modelling of pitting corrosion in marine and offshore steel structures – a technical review. Journal of Loss Prevention in the Process Industries 37 (2015) pp.39-62
• 11. Maureen et al.: Corrosion related Accidents in Rafineries: Lessons Learned from Accidents in EU and OECD Countries. Publications Office in EU, 2013
• 12. Melchers R.: Corrosion Wastage in Aged Structures. Condition Assessment of Aged Structures, 2008
• 13. Velazquez et al.: Statistical modeling of pitting corrosion: extrapolation of the maximum pit depth growth. International Journal of Electrochemical Science, 9 (2014) pp.4129-4143
• 14. Board N.T.S.; Columbia Gas Transmission Corporation Pipeline Rupture, Raport 2014
• 15. Poopola et al.: Corrosion problems during oil and gas production and its mitigation. International Journal of India Chemicals 4 (2013) pp.35
• 16. Nesic S.: Key issues related to modelling of internal corrosion of oil and gas pipelines – a review, Corrosion Science, 49 (2007) pp.4308-4338
• 17. Mannesmann Rexroth GmbH, Vademecum of hydraulics. Volume 3, Design and structure of hydraulic systems (in Polish). Mannesmann Rexroth Verlag (Polish edition), RPL 00281/10.88, Lohr a. Main, Germany 1992
• 18. Hobbit, Karlsson, Soersen Inc.: ABAQUS ver.6.7 User’s manual, Pawtucket, USA 2006
• 19. Stocznia Szczecinska SA: Technical documentation of B578I/542-1 (Shipyard internal materials) (in Polish), Szczecin 1997
• 20. Kucheryavyi V. I., Mil’kov S. N.: Probabilistic prediction of the residual lifetime of a gas pipeline under pitting corrosion. Journal of Machinery Manufacture and Reliability 2011, vol. 40, No. 5, pp. 489-493.
• 21. Lloyds Register: Rules and Regulations for the Classification of Ships, Part 5, Chapter 12, Section 2, London 2012.
• 22. A joint publication, Banaś J. And Solarski W. Editors: Chemistry for engineers (in Polish), AGH OEN, Kraków 2000
• 23. Orszulok W.: Ship’s hull strength in exploitation (in Polish) Wyd. Morskie, Gdansk 1983.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).