Evaluation of Deformation Properties of Elastic Fibres in Threads

• Autorzy: Recabov Ilqar Saleh , Nuriyev Mahammadali Nuraddin

Identyfikatory

DOI

10.5604/01.3001.0014.9293

Warianty tytułu

PL

Ocena właściwości odkształceniowych włókien elastycznych w niciach

• Języki publikacji: EN

Abstrakty

EN

In the article, the change in the linear dimensions of tissues is analysed by the closure of the elastane threads in the tissue system under the influence of wet processing. It is found that standard techniques cover changes in linear dimensions only in the direction of the base and utka. However, for clothing design, it is necessary to know the change in linear dimensions in arbitrary directions. The empirical models used to calculate these dimensions do not have the required accuracy. The article proposes a model for calculating the change in linear dimensions in an arbitrary direction based on the analysis of the geometry of the fabric and describing the process of tissue shrinkage under the influence of wet processing, which allows to obtain results with sufficient accuracy.

PL

W artykule analizowano zmianę wymiarów tkanin pod wpływem obróbki na mokro. Przy projektowaniu odzieży konieczna jest znajomość zmian wymiarów liniowych w dowolnych kierunkach. Modele empiryczne użyte do obliczenia tych wymiarów nie mają wymaganej dokładności. W artykule zaproponowano model do obliczania zmiany wymiarów liniowych w dowolnym kierunku na podstawie analizy geometrii tkaniny i opisu procesu kurczenia się tkaniny pod wpływem obróbki na mokro, co pozwala na uzyskanie wyników z wystarczającą dokładnością.

Słowa kluczowe

EN

elastic fabric; deformation of threads; complex properties; shrinkage of fabric; shrinkage anisotropy; size stability

PL

dzianina elastyczna; odkształcenie nici; właściwości złożone; kurczenie się tkanin; anizotropia kurczenia się; stabilność rozmiaru

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2021
• Tom: Vol. 29, no. 5 (149)
• Strony: 34--36
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Recabov Ilqar Saleh

• Azerbaijan State Economic University (UNEC), Faculty of Engineering, Department of Engineering and Applied Sciences, Istiglaliyyat str. 6, Baku, Azerbaijan, AZ1001

• https://orcid.org/0000-0001-7934-4604

autor

Nuriyev Mahammadali Nuraddin

• Azerbaijan State Economic University (UNEC), Faculty of Engineering, Department of Engineering and Applied Sciences, Istiglaliyyat str. 6, Baku, Azerbaijan, AZ1001

• https://orcid.org/0000-0002-6729-4627

Bibliografia

• 1. Radzhabov IS. Theoretical Determination of Change Fabric Linear Size Depending on Directions. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti 2012; (6): 36-39.
• 2. Buhvits AV, Radzhabov IS. The Influence of Rigidity and Cross Shrinkage of Semilinen Extensible Tissues on the Texture of its Surface. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti 2012; (4): 30-33.
• 3. Rahnev I, Rimini G. Isotropy Equilibrium of the Double Woven Fabric with Cotton Face and Wool Reverse Fibrous Compositions. IOP Conference Series: Materials Science and Engineering, 2017 conference-paper DOI: 10.1088/1757-899X/254/9/092003EID:2-s2.0-85035002762.
• 4. Korolvova ML, Smirnova NA, Rudovsky PN, Mininkova IV. Influence of Elastic Combined Self-Twist on the Anizotropy of Shrinkage of Flax-Containing Fabrics. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti 2009; 1: 18-20.
• 5. Rudovskii PN, Koroleva ML, Mininkova IV. The Study of Width Change of Fabrics with three Component SK-Structure Threads in the Weft. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti 2009; (4C): 72-74.
• 6. Grechukhin AP, Seliverstov VY, Rudovskiy PN. The Method of Determination of Yarn Bending Rigidity and Friction Factor During Interaction of Fibers. The Journal of the Textile Institute 2017; 108(12): 2067-2072. DOI: 10.1080/00405000.2017.1312676.
• 7. Grechukhin A, Rudovskiy P, Sokova G, Korabelnikov A. Carbon Fabric 3D Modeling According to Nonlinear Bending Theory. Journal of the Textile Institute 2020; 111(10): 1511-1517. DOI: 10.1080/00405000.2019.1707935.
• 8. Nuriyev MN, Seydaliyev IM, Recebov IS, Dadashova KS, Musayeva TТ. Determining the Dependences for Calculating a Conversion Scale of Profile Height of the Controlled Packing Surface. Eastern-European Journal of Enterprise Technologies 2017; 2/1(86): 58-62 http://journals.uran.ua/eejet/article/view/96977/93919.
• 9. Nuriyev MN. Destructive Methods of Controlling the Density Distribution of the Winding Body. Progressive Technologies in Mechanical Engineering 2016; 4(55): 44-48.
• 10. Nuriyev MN. Jabbarova GZ. Construction of Algorithms to Automatically Determine Individual Indicators when Assessing the Shape Quality of Cross-Wound Packages. Eastern-European Journal of Enterprise Technologies 2019; 1/1 (97): 41-49 http://journals.uran.ua/eejet/article/view/154923/157067.