PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Upper-bound estimation of load-carrying capacity of perforated cold-formed thin-walled steel lipped channel columns under compression loading

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Oszacowanie górne nośności perforowanych zimno formowanych prętów cienkościennych poddanych ściskaniu
Języki publikacji
EN
Abstrakty
EN
Upper-bound estimation of the load-capacity of cold-formed steel sections (TWCFS) with perforations, subjected to axial compression is presented. The estimation is performed on the basis of the Yield Line Analysis ((YLA). TWCFS lipped channel sections with two sets of perforations (on the web and on the flanges) are under investigation. The comparison of experimental results, FE simulation results, European code ultimate strength predictions and upper-bound estimation based on YLA approach is carried out and presented. Some conclusions concerning an applicability of the YLA approach for ultimate strength prediction of perforated TWCFS structural members are derived.
PL
W artykule przedstawiono wyniki górnego oszacowania nośności cienkościennych prętów zimno formowanych z perforacjami, poddanych osiowemu ściskaniu. Oszacowanie to jest oparte na metodzie załomów plastycznych. Rozpatrywano dwa warianty perforacji (środnika i pasów) cienkościennych prętów ceowych z żebrami końcowymi. Przeprowadzono analizę porównawczą wyników eksperymentu, wyników symulacji numerycznych MES oraz wyników obliczeń wg wzorów normatywnych normy europejskiej z wynikami oszacowania górnego nośności opartego na metodzie załomów plastycznych. Sformułowano wnioski dotyczące możliwości zastosowania tej metody do szacowania nośności cienkościennych prętów zimno formowanych z perforacjami.
Rocznik
Strony
565--573
Opis fizyczny
Bibliogr. 39 poz., rys., tab.
Twórcy
  • Department of Strength of Materials Lodz University of Technology ul. Stefanowskiego, 90-924 Lodz, Poland
  • Department of Mechanical Engineering, School of Computing, Engineering & Built Environment Glasgow Caledonian University Cowcaddens Rd, Glasgow G4 0BA, UK
  • Department of Mechanical Engineering, School of Computing, Engineering & Built Environment Glasgow Caledonian University Cowcaddens Rd, Glasgow G4 0BA, UK
  • Department of Strength of Materials Lodz University of Technology ul. Stefanowskiego, 90-924 Lodz, Poland
Bibliografia
  • 1. ANSYS ANSYS Mechanical APDL Structural Analysis Guide: ANSYS Release 13.0. - 2010.
  • 2. Brockenbrough R. L. Highway Engineering Handbook. McGraw-Hill Education, 2009. - ISBN: 9780071597630LCCN: 2009002381.
  • 3. Cardoso F. System reliability-based criteria for the design of steel storage rack framesby advanced analysis: Part II - Reliability analysis and design applications. Thin-Walled Structures 2019; 141: 725-739, https://doi.org/10.1016/j.tws.2019.03.021.
  • 4. Camotim D. Local post-buckling behavior of cold-formed steel rack columns. Proceedings. of 3th CIMS Conference (CIMS2000), Lisbon, Imperial College Press 2000: 213-222, https://doi.org/10.1142/9781848160095_0025.
  • 5. Davies M. The design ofperforated cold-formed steel sections subject to axial load and bending. Thin-Walled Structures 1997; 29/1-4: 141-157, https://doi.org/10.1016/S0263-8231(97)00024-4.
  • 6. Falkowicz K. Numerical analysis of compressed plates with a cut-out operating in the geometrically non-linear range. Eksploatacja i Niezawodnosc - Maintenace and Reliability 2015; 17 (2): 222-227, https://doi.org/10.17531/ein.2015.2.8.
  • 7. Flockhart CJ, Murray NW, Grzebieta R H. Comparison of upper-bound rigid-plastic yield line mechanism analysis by the energy and equilibrium strip method. Proc. of the 2nd Australasia Congress of Applied Mechanics. Canberra, 1999.
  • 8. Grenda M, Paczos P. Experimental and numerical study of local stability of non-standard thin-walled channel beams. Journal of Theoretical and Applied Mechanics 2019; 57: 549-562, https://doi.org/10.15632/jtam-pl/109601.
  • 9. Hutton DV. Fundamentals of Finite Element Analysis - McGraw-Hill, 2004. - ISBN: 9780072395365LCCN: 2003048735.
  • 10. Institution British Standards BS5950 1998: British Standards for Structural Use of Steel Work in Buildings. Part 5: Code of Practice for Design of Cold Formed Thin Gauge Sections. 1998.
  • 11. Iron American i Institute Steel North American Specification for the Design of Cold-formed Steel Structural Members. American Iron and Steel Institute, 2016.
  • 12. Kolakowski Z. A semi-analytical method for the analysis of the interactive buckling of thin-walled elastic structures in the second order approximation., Int. J. Solids Structures 1996; 33(25): 3779-3090, https://doi.org/10.1016/0020-7683(95)00211-1.
  • 13. Kotełko M, Lis P, Macdonald M. Load-Capacity Probabilistic Sensitivity Analysis of Thin-Walled Beams. Proceedings of the 7th International Conference on Thin Walled Structures. Busan. 2014.
  • 14. Kotełko M. Load-capacity and mechanisms of failure of thin-walled structures (in Polish - Nośność i mechanizmy zniszczenia konstrukcji cienkościennych), Wydawnictwa Naukowo-Techniczne, 2011.
  • 15. Kotełko M. Load-capacity estimation and collapse analysis of thin-walled beams and columns-recent advances. Thin-Walled Structures 2004; 42: 153-175, https://doi.org/10.1016/S0263-8231(03)00055-7.
  • 16. Kotełko M, Mania R. Alternative solutions of the problem of load-capacity of thin-walled plated structures. Mechanics and Mechanical Engineering. 2008; 2: 323-336.
  • 17. Kulatunga M P. Load capacity of cold-formed column members of lipped channel cross-section with perforations subjected to compression loading - Part I: FE simulation and test results. Thin-Walled Structures 2014; 80: 1-12, https://doi.org/10.1016/j.tws.2014.02.017.
  • 18. Kulatunga M, Macdonald M. Investigation of cold-formed steel structural members with perforations of different arrangements subjected to compression loading. Thin-Walled Structures 2013; 67: 78-87, https://doi.org/10.1016/j.tws.2013.02.014.
  • 19. Kulatunga M, Macdonald M. Investigation of Cold-Formed Steel Structural Members With Perforations of Different Shapes Subjected to Compression Loading. Proceedings of the 6th International Conference on Couple Instabilities in Metal Structures. Busan 2012, https://doi.org/10.1016/j.tws.2013.02.014.
  • 20. Kulatunga M, Macdonald M. The Efficient Design of Cold-Formed Perforated Thin-Walled Steel Structural Member Subjected to Compression Loading. Proceedings of the 7th International Conference on Thin Walled Structures. Glasgow 2014.
  • 21. Liew JYR, Thevendran V, Shanmugam NE. Thin-Walled Structures: Research and Development. Elsevier Science, 1998.
  • 22. Macdonald M, Kulatunga M, Kotełko M. The effects of compression loading on perforated cold-formed thin-walled steel structural members of lipped-channel cross-section. AIP Conference Proceedings 2019, https://doi.org/10.1063/1.5086138.
  • 23. Magnucka-Blandzi E. Effective shaping of cold-formed thin-walled channel beams with double-box flanges in pure bending. Thin-Walled Structures 2011; 49: 121-128, https://doi.org/10.1016/j.tws.2010.08.013.
  • 24. Moen C, Schafer B. Direct Strength Method for Design of Cold-Formed Steel Columns with Holes. Journal of Structural Engineering-ASCE 2010; 137, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000310.
  • 25. Moen C, Schafer B. Experiments on cold-formed steel columns with holes. Thin-walled Structures - Thin Wall Structures 2008; 46: 1164-1182, https://doi.org/10.1016/j.tws.2008.01.021.
  • 26. Murray N W. Introduction to the Theory of Thin-Walled Structures. Clarendon Press, 1986.
  • 27. Murray N W, Khoo P. S. Some basic plastic mechanisms in the local buckling of thin-walled steel structures. International Journal of Mechanical Sciences 1981; 23: 703-713, https://doi.org/10.1016/0020-7403(81)90008-4.
  • 28. Nedelcu M. Buckling mode identification of perforated thin-walled members by using GBT and shell FEA. Thin-Walled Structures 2014, 82:67-81, https://doi.org/10.1016/j.tws.2014.04.005.
  • 29. Rhodes J. Design Cold Form Steel Members. Taylor & Francis, 1991.
  • 30. Schafer B. Review: The Direct Strength Method of cold-formed steel member design. Journal of Constructional Steel Research 2008; 64 (7-8): 766-778, https://doi.org/10.1016/j.jcsr.2008.01.022.
  • 31. Schafer B, Peköz T. Computational modeling of cold-formed steel: Characterizing geometric imperfections and residual stresses. Journal of Constructional Steel Research 1998; 47: 193-210, https://doi.org/10.1016/S0143-974X(98)00007-8.
  • 32. Standardization European Committee EN 1993-1-3:2006, Eurocode 3., 2009, Design of Steel Structures; Part 1.3: General Rules - Supplementary Rules for Cold Formed Thin Gauge Members and Sheeting. - Brussels : CEN, 2009.
  • 33. Teter A, Kołakowski Z. Lower bound estimation of load-carrying capacity of thin-walled structures with intermediate stiffeners. Thin-Walled Structures 2001; 39(8): 649-669, https://doi.org/10.1016/S0263-8231(01)00028-3.
  • 34. Ungureanu V. et all. Plastic mechanisms of thin-walled cold-formed steel members in eccentric compression. Thin-Walled Structures 2018; 63: 183-206, https://doi.org/10.1063/1.5019077.
  • 35. Ungureanu V, Kotełko M, Dubina D. Ultimate limit capacity of thin-walled cold-formed steel members. Ro. J. Techn. Sci. Appl. Mechanics 2018; 128: 184-192, https://doi.org/10.1016/j.tws.2017.09.029.
  • 36. Xiao-Ling Z. Yield line mechanism analysis of steel members and connections. Progress in Structural Engineering and Materials 2003; 5:252-262, https://doi.org/10.1002/pse.161.
  • 37. Yan Qi L. Analysis and design reliability of axially compressed members with high-strength cold-formed thin-walled steel. Thin-Walled Structures 2007; 45: 473-492, https://doi.org/10.1016/j.tws.2007.02.012.
  • 38. Yao Z, Rasmussen K. Inelastic local buckling behaviour of perforated plates and sections under compression. Thin-Walled Structures 2012; 61: 49-70, https://doi.org/10.1016/j.tws.2012.07.002.
  • 39. Yu W. W. Cold-Formed Steel Design. Wiley, 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-d7275a4c-7638-4546-971e-2494e139f29f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.