Influence of the suspension shape on the dynamic characteristics of the electrodynamic shakers

• Autorzy: Augustyn Damian , Fidali Marek

Identyfikatory

DOI

10.21008/j.0860-6897.2023.2.27

• Języki publikacji: EN

Abstrakty

EN

Electrodynamic shakers are being used for years in dynamic tests of machines and devices. One of the main components of electrodynamic shakers is the armature suspension. Suspension is one of the factors responsible for the dynamic characteristics of the shaker. Various types of suspensions are used in shakers [1, 2]. Their role is to ensure the correct stroke of the armature and to keep the coil concentrically in the magnetic gap. As part of the research, the influence of the shape of the suspension springs of the electrodynamic shaker on its dynamic characteristics was evaluated. During the research, self-designed electrodynamic shaker was used, in which a suspension consisting of two-disc springs made of glass fiber with a thickness of 0.5 mm was used. Eight different spring types were prepared for the study. The tests were carried out in laboratory conditions on a previously prepared test bench. For each of the springs tested, dynamic frequency characteristics were determined for three frequency ranges: 10 - 100 Hz with a step of 10 Hz, 100 Hz - 1000 Hz and 1000 Hz - 10000 Hz with a step of 100 Hz. Studies show a significant influence of the shape of the springs used on the dynamic characteristics of the modal shaker. For the preselected springs, tests were carried out without and with a load. The characteristics determined during the research were analyzed, which allowed to indicate the optimal shape of the spring, due to the values of the generated force and the linearity of the dynamic characteristics [3, 4].

Słowa kluczowe

EN

electrodynamic shaker; spring; dynamic characteristics; construction; experimental research

PL

wstrząsarka elektrodynamiczna; resor; charakterystyka dynamiczna; konstrukcja; badania eksperymentalne

• Wydawca: Poznan University of Technology. Institute of Applied Mechanics
• Czasopismo: Vibrations in Physical Systems
• Rocznik: 2023
• Tom: Vol. 34, nr 2
• Strony: art. no. 2023227
• Opis fizyczny: Bibliogr. 11 poz., il. kolor., fot., rys., wykr.

Twórcy

autor

Augustyn Damian

• Silesian University of Technology

• https://orcid.org/0000-0002-4896-4090

autor

Fidali Marek

• Silesian University of Technology

• https://orcid.org/0000-0002-3667-5582

Bibliografia

• 1. G. F. Lang, D. Snyder; Understanding the physics of electrodynamic shaker performance; Sound and Vibration, 2001, 35, 24-33
• 2. Sentek Dynamics; An introduction to Sentek Dynamics vibration testing systems; https://www.sentekdynamics.com/introduction-to-sentek-dynamics-vibration-testing-systems (accessed on 2023.12.06)
• 3. D. Augustyn; Wyznaczanie wybranych charakterystyk wzbudnika modalnego; Master's Thesis, Silesian University of Technology, Gliwice, 2021
• 4. D. Augustyn; Optymalizacja konstrukcji wzbudnika elektrodynamicznego; Transitional Work, Silesian University of Technology,Gliwice, 2021
• 5. G. D’Emilia, A. Gaspari, F. Mazzoleni, E. Natale, A. Schiavi; Calibration of tri-axial MEMS accelerometers in the low-frequency range - Part 1: Comparison among methods; Journal of Sensors and Sensor Systems, 2018, 7, 245-257; DOI: 10.5194/jsss-7-245-2018
• 6. M. Česnik, J. Slavič; Vibrational Fatigue and Structural Dynamics for Harmonic and Random Loads; Strojniški vestnik - Journal of Mechanical Engineering, 2015, 60, 339-348; DOI: 10.5545/sv-jme.2014.1831
• 7. G. R. Henderson, A. G. Piersol; Fatigue damage related descriptor for random vibration test environments; Sound and Vibration, 1995, 29, 20-2.
• 8. Dewesoft documentation; https://www.manualslib.com/manual/2054662/Dewesoft-Ds-Pm-20.html (accessed on 2023.12.06)
• 9. Material documentation; G10/FR-4 Glass Epoxy; https://www.curbellplastics.com/Research-Solutions/Materials/G10-FR-4-Glass-Epoxy (accessed on 2023.12.06)
• 10. P. Blaschke, S. Schneider, R. Kamenzky, D. J. Alarcón; Non-linearity identification of composite materials by scalable impact modal testing; In: Conference Proceedings of the Society for Experimental Mechanics Series, 2017, 5B, 7-14; DOI: 10.1007/978-3-319-54987-3_2
• 11. P. Czop, D. Slawik, D, Validation of Fatigue Model of a Hydraulic Shock Absorber Equipped with Shim Stack Valves. In Journal of Physics: Conference Series, 2022, 2184; DOI: 10.1088/1742-6596/2184/1/012057

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).