Quality analysis of the mechanical lever and improvement of non-destructive testing process

• Autorzy: Siwiec Dominika , Pacana Andrzej , Dwornicka Renata

Identyfikatory

DOI

10.2478/czoto-2020-0037

• Języki publikacji: EN

Abstrakty

EN

The analysis of product quality is an indispensable action in developing enterprises. In case of mechanical products, the non-destructive tests (NDT) are effective way to make control. Non-destructive tests allow making assessing product quality with-out destroying it. Due to the dynamically growing requirements of customers and necessary, the improvement actions for demanding organizations important is to make a complex analysis of quality products. Such an action was proposed to a production and service company located in Podkarpacie region of Poland. The aim was to analyze the quality of the mechanical lever and improvement the process of non-destructive tests, in order to identify the source of nonconformity with using quality management techniques. These activities were to demonstrate that the sequence (NDT and selected quality management techniques) would allow the detection of unconformities on the product surface and also identify the source of this unconformity. In the enterprise, the quality research of the product using fluorescent and magnetic-powder methods was made. After identified the unconformity on the product the additional actions which could point the source of unconformity were not practicing. The proposition of improvement in the NTD was use appropriately selected quality management techniques (Ishi-kawa diagram and 5Why method) after identified the unconformity. The mechanical lever was tested, which its surface using the magnetic-powder method was analyzed. After identified unconformity (scratch) using the Ishikawa diagram, the potential causes were identified and four main causes were selected (i.e.: uncleaned pattern, impurities during production, poor molding mass, poorly carried out product production method). It has been shown that sequence of NDT, Ishikawa diagram and 5Why method allows to identify the unconformity on product surface and source its creation. This sequence could be practicing to analyze other product in production and services enterprises.

Słowa kluczowe

EN

mechanical engineering; mechanical product; quality; non-destructive test; magnetic-powder method

PL

inżynieria mechaniczna; produkt mechaniczny; jakość; testy nieniszczące; metoda magnetyczno proszkowa

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2020
• Tom: Vol. 2, nr 1
• Strony: 299--306
• Opis fizyczny: Bibliogr. 43 poz., rys.

Twórcy

autor

Siwiec Dominika

• Rzeszow University of Technology, Poland

autor

Pacana Andrzej

• Rzeszow University of Technology, Poland

autor

Dwornicka Renata

• Cracow University of Technology, Poland

Bibliografia

• [1] Anouncia S. M., 2018. Digital interferometry with image processing and computational techniques for NDT of composite materials, INSIGHT, 60(12), 685-696.
• [2] Barluenga G., Puentes J., Palomar I. et al., 2018. Methodology for monitoring Cement Based Materials at Early Age combining NDT techniques, Construction and Building Materials, 193, 373-383.
• [3] Bernieri A., Ferrigno L., Laracca M. et al., 2018. Ultrasonic NDT on aluminum bars: An experimental performance comparison of excitation and processing techniques, MEASUREMENT, 128, 393-402.
• [4] Chauveau D., 2018. Review of NDT and process monitoring techniques usable to pro-duce high-quality parts by welding or additive manufacturing, Welding In The World, 62(5), 1097-1118.
• [5] Doaei M., Tavallali M. S., 2018. Intelligent screening of electrofusion-polyethylene joints based on a thermal NDT method, infrared Physics & Technology, 90, 1-7.
• [6] Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110, (5), 51-58.
• [7] Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164.
• [8] Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc. ,5, 17-24.
• [9] Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
• [10] Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
• [11] Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
• [12] Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
• [13] Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
• [14] Gawlik, J., Kiełbus, A. and Karpisz, D., 2015. Application of an integrated database system for processing difficult materials. Solid State Phenomena, 223, 35-45.
• [15] Guo C., Xu C., Xiao D. et al., 2019. A tool centre point calibration method of a dual-robot NDT system for semi-enclosed workpiece testing, Industrial Robot-The Inter-national Journal of Robotics Research And Application, 46(2), 202-210.
• [16] Gurieva T., Marushin E., Mednikov A et al., 2018. NDT Status of PF1 Coil Welds, IEEE Transactions On Applied Superconductivity, 28(4).
• [17] Hejripour F., Aidun D. K., 2017. Consumable selection for arc welding between Stain-less Steel 410 and Inconel 718, Journal Of Materials Processing Technology, 245, 287-299.
• [18] Joshaghani A., 2019. Identifying the problematic areas with structural deficiencies of pavements using non-destructive tests (NDT), International Journal of Pavement Engineering, 20(11), 1359-1369.
• [19] Karpisz, D. and Kiełbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017.
• [20] Krysztofik J., Manaj W., 2011. Non-destructive testing technology application in aviation, Works of the Institute of Aviation, 211, 120-129.
• [21] Malindzak D. et al. 2017. An effective model for the quality of logistics and improvement of environmental protection in a cement plant, Przemysł Chemiczny, 96(9), 1958-1962.
• [22] Non-destructive testing - Magnetic powder testing. Part 1: General principles. PN-EN ISO 9934-1:2017-02.
• [23] Pacana A., Bednarova L., Liberko I. et al. 2014. Effect of selected production factors of the stretch film on its extensibility, Przemysł Chemiczny, 93(7), 1139-1140.
• [24] Pacana A., Radon-Cholewa A., Pacana J. et al. 2015. The study of stickiness of pack-aging film by Shainin method, Przemysł Chemiczny, 94(8), 1334-1336.
• [25] Pacana A., Siwiec D., Bednárová L., 2019. Analysis of the incompatibility of the product with fluorescent method, Metalurgija, 58(3-4), 337-340.
• [26] Pawłowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
• [27] Rentala V. K., Mylavarapu P., Gautam J. P., 2018. Issues in estimating probability of detection of NDT techniques - A model assisted approach, Ultrasonics, 87, 59-70.
• [28] Sangoju B., Ramanjaneyulu K., Sasmal S. et al., 2019. NDT For Condition Assessment Of IDCT RC Walls And Repair Measures For Long Term Durability, Construction and Building Materials, 218, 270-283.
• [29] Siwiec D. et al., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing, Przemysł Chemiczny, 98(10), 1594-1596.
• [30] Skotnicka-Zasadzień B., Wolniak R., Zasadzien M. 2017. Use of quality engineering tools and methods for the analysis of production processes - case study, Proc. of the 2nd Int. Conf. on Economic and Business Management, 33, 240-245.
• [31] Skrzypczak-Pietraszek, E., 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol., 33, 155-161.
• [32] Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.
• [33] Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
• [34] Son M., Kim M., 2019. Development and Validation of an NDT Based on Total Sound Signal Energy, journal Of Testing And Evaluation, 47(1), 87-103.
• [35] Sozański L., 2012. Welded joints magnetic-particle inspection standards, Przegląd Spawalnictwa, 10, 58-60.
• [36] Stone D. J., Alexandrov B. T., Penso J. A., 2018. Alloy Composition and Critical Tem-peratures in Type 410 Steel Welds, welding Journal, 97(10), 286S-300S.
• [37] Ulewicz R., 2003. Quality Control System in Production of the Castings from Spheroid Cast Iron, Metalurgija, 42(1),61-63.
• [38] Ulewicz R., 2018. Narzędzia jakości w praktyce. Poradnik dla biznesu, Oficyna Wydaw-nicza Stowarzyszenia Menedżerów Jakości i Produkcji, Częstochowa.
• [39] Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. Metal 2013 Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
• [40] Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant martensitic steel. Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.
• [41] Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
• [42] Wolniak R., 2017. Application methods for analysis car accident in industry on the ex-ample of power, Support Systems in Production Engineering, 6(4), 34-40.
• [43] Zientek P., 2016. Non-destructive testing methods for selected elements of small power turbogenerators, Electrical Machines - Problem Notebooks, 3, 115-120.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).