Track planarity and verticality of the warehouse racks for the quality assessment of further operation

• Autorzy: Labant Slavomír , Bindzárová Gergel’ová Marcela , Rákay Štefan , Weiss Erik , Zuzik Jozef

Identyfikatory

DOI

10.24425/GAC.2019.131071

• Języki publikacji: EN

Abstrakty

EN

The content of this paper is dedicated to the analysis of the flat planarity of forklift stacker’s track and cross sections of lanes between racks in a warehouse. These results will serve as a basis for a possible reconstruction of the track and racks and shall contribute to the overall reduction of costs related to an unexpected bad technical condition. The contribution aims to assess the geometric parameters of warehouse racks at the selected company operation in terms of their suitability for further use. The choice of the selected topic represents a relevant issue, which can be possibly encountered in daily practice related to the storage and transport processes of products. The measurements and processing of longitudinal profiles and cross-sections were made in the local coordinate and local vertical system. Points on the lower, middle and upper level of racks were measured for good and correct interpretation of results. Testing the measured positional change of poles is on the end of this paper. The immediate readiness of interest groups of subjects for adopting necessary actions to ensure the stability and safe operation of the whole network of lanes of the warehouse spaces is the expected contribution of the presented results.

Słowa kluczowe

EN

longitudinal profiles and cross sections; poles of racks; regression analysis; safety of warehouse racks

PL

regał magazynowy; bezpieczeństwo regałów magazynowych; profil podłużny

• Wydawca: Komitet Geodezji PAN
• Czasopismo: Geodesy and Cartography
• Rocznik: 2019
• Tom: Vol. 68, no. 2
• Strony: 305--319
• Opis fizyczny: Bibliogr. 20 poz., fot., rys., wykr.

Twórcy

autor

Labant Slavomír

• Technical University of Košice, Faculty of Mining, Ecology, Process control and Geotechnologies, Institute of Geodesy, Cartography and GIS 9 Letna St., 042 00 Košice, Slovak Republic

autor

Bindzárová Gergel’ová Marcela

• Technical University of Košice, Faculty of Mining, Ecology, Process control and Geotechnologies, Institute of Geodesy, Cartography and GIS 9 Letna St., 042 00 Košice, Slovak Republic

autor

Rákay Štefan

• Technical University of Košice, Faculty of Mining, Ecology, Process control and Geotechnologies, Institute of Geodesy, Cartography and GIS 9 Letna St., 042 00 Košice, Slovak Republic

autor

Weiss Erik

• Technical University of Košice, Faculty of Mining, Ecology, Process control and Geotechnologies, Institute of Earth Resources 9 Letna St., 042 00 Košice, Slovak Republic

autor

Zuzik Jozef

• Technical University of Košice, Faculty of Mining, Ecology, Process control and Geotechnologies, Institute of Earth Resources 9 Letna St., 042 00 Košice, Slovak Republic

Bibliografia

• [1] Bernuzzi, C., Gobetti, A., Giammaria, G. and Simoncelli, M. (2015a). Unbraced pallet rack design in accordance with European practice–part 1: selection of the method of analysis. Thin-Walled Structures, 86, 185–207.
• [2] Bernuzzi, C., Gobetti, A., Gabbianelli, G. and Simoncelli, M. (2015b). Unbraced pallet rack design in accordance with European practice-part 2: essential verification checks. ThinWalled Structures, 86, 208–229.
• [3] Bonada, J., Pastor, M.M., Roure, F. and Casafont, M. (2016). Distortional influence of pallet rack uprights subject to combined compression and bending. Structures, 8(2), 275–285.
• [4] Dandoš, R., Stanková, H., Cernota, P. and Subiková, M. (2013). Spatial Visualisation of the Infantry Blockhouse OP – S 25 ”U trigonometru”. Advances in Military Technology, 8(1), 73–84. ISSN 1802-2308.
• [5] Drabiková, E. (2016). Quantitative method DEA for economic analysis of efficiency. Engineering education in the 21st century, (pp. 35–38). Košice, TU. ISBN 978-80-553-2570-5.
• [6] Elias, G.C., De Almeida Neiva, L.H., Sarmanho, A.M.C., Alves, V.N. and Barbosa e Castro, A.F. (2018). Ultimate load of steel storage systems uprights. Engineering Structures, 170, 53–62.
• [7] Gašinec, J., Gašincová, S., Cernota, P. and Stanková, H. (2012a). Uses of terrestrial laser sanning in monitoring of ground ice within Dobsinska Ice Cave. Inžinieria Mineralna, 13 (2 (30)), 31–42. ISSN 1640-4920.
• [8] Gašinec, J., Gašincová, S. and Trembeczká, E. (2014). Robust orthogonal fitting of plane. In˙zynieria Mineralna, 15 (1 (33)), 7–13. ISSN 1640-4920.
• [9] Gašinec, J., Rákay, Š., Rákay, Š. sr. and Šimcák, M. (2012b). Geodetic survey of tuff wine cellars in Vezká Trna. Acta Montanistica Slovaca, 17 (2), 189–194. ISSN 1335-1788.
• [10] Godley, M.H.R. (1991). Storage racking. In chapter 11: Design of cold Formed Steel Members. Ed. J. Rhodes. Elsevier Applied Science, pp. 361–399.
• [11] Izvoltova, J., Villim, A. and Kozak, P. (2014). Determination of Geometrical Track Position by Robotic Total Station. Procedia Engineering, 91, 322–327. ISSN: 1877-7058.
• [12] Ižvoltová, J. and Chromcák, J. (2015). Diagnostics of Systematic Errors in Angle Measurements. Procedia Engineering, 111, 339–343. ISSN: 1877-7058.
• [13] Kanbyilmaz, A., Castiglioni, C.A., Brambilla G. and Chiarelli, G.P. (2016). Experimental assessment of the seismic behavior of unbraced steel storage pallet racks. Thin-Walled Structures, 108, 391–405.
• [14] Labant, S., Gašinec, J., Rákay, Š. and Baran, M. (2019). Processing and analysis of measurements I. TU Košice, 88 p., ISBN 978-80-553-2845-6.
• [15] Pukanská, K., Bartoš, K., Gajdošík, J. and Marcian, M. (2014). Determination of deformations of a highcapacity tank using the technology of terrestrial laser scanning. American international journal of contemporary research, 4(4), 38–45. ISSN 2162-142X.
• [16] Rákay, Š., Rákay, Š. sr., Weiss, R. and Zuzik, J. (2012). Adjusting wheel alignment on machinery equipment. Acta Montanistica Slovaca, 17 (4), 348–353. ISSN 1335-1788.
• [17] Sokol, Š., Bajtala, M., Ježko, J. and Cernota, P. (2014). Testing the accuracy of determining threedimensional Cartesian coordinates using the universal measuring station S8 Trimble DR Plus Robotic. Inzynieria mineralna, 15 (1 (33)), 85–90. ISSN 1640-4920.
• [18] Sokol, Š., Lipták, M. and Bajtala, M. (2015). Comparison of a multiple regression model and a two-regime model of a vertical refraction. GeoScience Engineering, 61 (1), 32–41. ISSN 1802-5420.
• [19] Šíma, J., Ižvoltová, J. and Seidlová, A. (2011). Geodetic Measurements of Underground Gas Reservoirs. Acta Montanistica Slovaca, 16 (4), 307–311. ISSN 1335-1788.
• [20] Total stations – Leica TPS1200+, digital leveling devices – Leica DNA and accessories to geodetic instruments. [online, cit 2016.7.12].

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)