Numerical Analysis of Solid Particles Flow in Liquid Metal

• Autorzy: Szucki M. , Goraj T. , Lelito J. , Suchy J. S.
• Języki publikacji: EN

Abstrakty

EN

The aim of the study was to determine the influence of the solid particles density and size on their distribution in the solidified cast. As part of the work, a series of numerical simulations of filling and solidification process were made with the use of FLOW-3D software. The analysis was performed on pure aluminum and six chosen types of particles with different size and density. Obtained results may help to understand the behavior of solid particles in liquid metals.

Słowa kluczowe

EN

numerical analysis; solid particle; particle flow; metal matrix composite; FLOW-3D software

PL

analiza numeryczna; cząstka stała; przepływ cząstki; kompozyt metalowy; oprogramowanie FLOW-3D

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 3 spec.
• Strony: 161--166
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Szucki M.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland

autor

Goraj T.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland

autor

Lelito J.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland

autor

Suchy J. S.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland

Bibliografia

• [1] Hashim, J., Looney, L., Hashmi, M.S.J. (2002). Particle distribution in cast metal matrix composites-Part I. Journal of Materials Processing Technology, 123, 251-257 DOI: 10.1016/S0924-0136(02)00098-5.
• [2] Lelito, J., Żak, P.L., Greer, A.L., Suchy, J.S. Krajewski, W.K., Gracz, B., Szucki, M., Shirzadi, A.A. (2012). Crystallization model of magnesium primary phase in the AZ91/SiC composite. Composites Part B: Engineering, 43, 3306-3309. DOI: 10.1016/j.compositesb.2012.01.088.
• [3] Lelito, J., Żak, P.L., Shirzadi, A.A., Greer, A.L., Krajewski, W.K., Suchy, J.S., Haberl, K., Schumacher, P. (2012) Effect of SiC reinforcement particles on the grain density in a magnesium-based metal–matrix composite: Modelling and experiment. Acta Materialia, 60, 2950-2958. DOI: 10.1016/j.actamat.2012.01. 058.
• [4] Pasieka, A., Konopka, Z. (2013) The Influence of Pressure Die Casting Parameters on Distribution of Reinforcing Particles in the AlSi11/10% SiC Composite. Archives of Foundry Engineering, 13(3), 64-67. DOI: 10.2478/afe-2013-0061.
• [5] Xu, Z., Yan, J., Liu, J., Yang, S. (2008). Floating of SiC particles in a Zn–Al filler metal. Materials Science and Engineering A, 474, 157-164. DOI: 10.1016/j.msea.2007.05. 088.
• [6] Cetin, A., Kalkanli, A. (2009). Numerical simulation of solidification kinetics in A356/SiCp composites for assessment of as-cast particle distribution. Journal of Materials Processing Technology, 209, 4795-4801. DOI: 10.1016/j.jmatprotec.2008.12.007.
• [7] Reilly, C., Jolly, M.R., Green, N.R., Gebelin, J.C., (2010). Assessment of Casting Filling by Modeling Surface Entrainment Events Using CFD. In TMS Annual Meeting & Exhibition, 14-18 February, 2010. Seattle, Washington, USA.
• [8] Nath, D., Asthana, R., Rohatgi, P.K. (1987). Particle distribution control in cast aluminium alloy-mica composites. Journal of Material Science, 22(1), 170-176. DOI: 10.1007/BF01160567.