Synthesis of multicomponent metallic layers during impulse plasma deposition

• Autorzy: Nowakowska-Langier K. , Chodun R. , Zdunek K.

Identyfikatory

DOI

10.1515/msp-2015-0077

• Języki publikacji: EN

Abstrakty

EN

Pulsed plasma in the impulse plasma deposition (IPD) synthesis is generated in a coaxial accelerator by strong periodic electrical pulses, and it is distributed in a form of energetic plasma packets. A nearly complete ionization of gas, in these conditions of plasma generation, favors the nucleation of new phase of ions and synthesis of metastable materials in a form of coatings which are characterized by amorphous and/or nanocrystalline structure. In this work, the Fe-Cu alloy, which is immiscible in the state of equilibrium, was selected as a model system to study the possibility of formation of a non-equilibrium phase during the IPD synthesis. Structural characterization of the layers was done by means of X-ray diffraction and conversion-electron Mossbauer spectroscopy. It was found that supersaturated solid solutions were created as a result of mixing and/or alloying effects between the layer components delivered to the substrate independently and separately in time. Therefore, the solubility in the Fe-Cu system was largely extended in relation to the equilibrium conditions, as described by the equilibrium phase diagram in the solid state.

Słowa kluczowe

EN

Fe-Cu alloy; metastable alloys; nanocrystalline films; physical vapor deposition; PVD; impulse plasma deposition; IPD

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2015
• Tom: Vol. 33, No. 4
• Strony: 841--846
• Opis fizyczny: Bibliogr. 34 poz., rys.

Twórcy

autor

Nowakowska-Langier K.

• Material Physics Department, National Centre for Nuclear Research, A. Soltana 7, 05-400 Otwock-Swierk, Poland

autor

Chodun R.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland

autor

Zdunek K.

• Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland

Bibliografia

• [1] Zdunek K., Surf. Coat. Tech., 201 (2007), 4813.
• [2] Zdunek K., J. Mater. Sci., 26 (1991), 4433.
• [3] Nowakowska-Langier K., Zdunek K., Kopcewicz M., Vacuum, 78 (2) (2005), 423.
• [4] Kashchiew D., J. Cryst. Growth, 13 – 14 (1972), 128.
• [5] Rusanow A., J. Colloid Inter. Sci., 68 (1972), 32.
• [6] Sokolowska A., Zdunek K., Grigoriew H., Romanowski Z., J. Mater. Sci., 21 (1986), 763.
• [7] Zdunek K., Vacuum, 47 (1996), 1437.
• [8] Nowakowska-Langier K., Zdunek K., Wierzbinski E., Surf. Coat. Tech., 204 (2010), 2564.
• [9] Nowakowska-Langier K., Zdunek K, Plasma Process. Polym., 6 (2009), S826.
• [10] Nowakowska-Langier K., Chodun R., Nietubyc R., Minikayev R., Zdunek K., Appl. Surf. Sci., 275 (2013), 14.
• [11] Massalski T.B., Binary Alloy Phase Diagrams, 2nd Edition, ASM International, Metals Park, Ohio, 1991.
• [12] Turchanin M.A., Agraval P.G., Nikolaenko I.V., J. Phase Equil. Diff., 24 (2003), 307.
• [13] Koziel T., Kedzierski Z., Zielinska-Lipiec A., Ziewie K., Scripta Mater., 54 (2006), 1991.
• [14] Qi M., Zhu M., Yang D.Z., J. Mater. Sci. Lett., 13 (1994), 966.
• [15] Jiang J.Z., Gente C., Bormann R., Mat. Sci. Eng. A-Struct., 242 (1998), 268.
• [16] Ueda Y., Ikeda S., Mori Y., Zaman H., Mat. Sci. Eng. A-Struct., 217 – 218 (1996), 371.
• [17] Umut S., Celalettin Baykul M., Adv. Mater. Sci. Eng., 2013 (2013), 1.
• [18] Almasi-Kashi M., Ramazani A., Kheyri F., Jafari-Khamse E., Mater. Chem. Phys., 144 (2014), 230.
• [19] Kneller E.F., J. Appl. Phys., 35 (1964), 2210.
• [20] Sumiyama K., Yoshitake T., Nakamura Y., Acta Metall. Sin., 33 (1985), 1785.
• [21] Sumiyama K., Nakamura Y., J. Magn. Magn. Mater., 35 (1983), 219.
• [22] Chen Y., Liu Y., Sun C., Yu K.Y., Song M., Wang H., Zhang X., Acta Mater., 60 (2012), 6312.
• [23] Uenishi K., Kobayashi K.F., Nasu S., Hatano H., Ishihara K.N., Shingu P.H., Z. Metallkd., 83 (1992), 132.
• [24] Yavari A.R., Desre P.J., Benameur T., Benameur, Phys. Rev. Lett., 68 (1992), 2235.
• [25] Majumdar B., Manivel R.M., Narayanasamy A., Chattopadhyay K., J. Alloy. Compd., 248 (1997), 192.
• [26] Ma E., Prog. Mater. Sci., 50 (2005), 413.
• [27] Zhang S., Gong H., Gao N., Wang Z., Li G., Comp. Mater. Sci., 85 (2014), 230.
• [28] Zhang S., Gong H., Chen X., Li G., Wang Z., Appl. Surf. Sci., 314 (2014), 433.
• [29] Gong H., Lu W., Wang L., Li G., Zhang S., Comp. Mater. Sci., 65 (2012), 230.
• [30] Cattaneo D., Foglio S., Casari C.S., Li Bassi A., Passoni M., Bottani C.E., Surf. Sci., 601 (2007), 1892.
• [31] Childress J.R., Chien C.L., Phys. Rev. B, 43 (1991), 8089.
• [32] Crespo P., Hernando A., Escorial G.A., Phys. Rev. B, 49 (1994), 3227.
• [33] Crespo P., Hernando A., Yavari R., Drbohlav O., Escorial G.A., Phys. Rev. B, 48 (1993), 7134.
• [34] Nowakowska-Langier K., Zdunek K., Lucinski T., Surf. Coat. Tech., 9 – 11 (2007), 5333.