Improvement of Artistic Cast Production System

• Autorzy: Władysiak R. , Pacyniak T. , Trzoska J.

Identyfikatory

DOI

10.1515/afe-2017-0107

• Języki publikacji: EN

Abstrakty

EN

The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

Słowa kluczowe

EN

artistic casting; sand-piece moulding; improvement; Lean Manufacturing

PL

odlew artystyczny; formy odlewnicze; naprawy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2017
• Tom: Vol. 17, iss. 3
• Strony: 143--148
• Opis fizyczny: Bibliogr. 13 poz., il., rys., tab.

Twórcy

autor

Władysiak R.

• Department of Materials Engineering and Production Systems, Lodz University of Technology, 1/15 Stefanowskiego Street, 90-924 Lodz, Poland

autor

Pacyniak T.

• Department of Materials Engineering and Production Systems, Lodz University of Technology, 1/15 Stefanowskiego Street, 90-924 Lodz, Poland

autor

Trzoska J.

• Gliwickie Zakłady Urządzeń Technicznych GZUT S.A., 2 Robotnicza Street, 44-100 Gliwice, Poland

Bibliografia

• [1] Gawroński, J., Wojarski, T. (2007). Art Foundry. Forming and casting in Pieces. Gliwice: Silesian University Publishing House. (in Polish).
• [2] Grzejszczak, M. (2017). Improvement of Technology and Organization of Artistic Castings Manufacturing with Use of Computer Systems. Unpublished M.Sc. dissertation. Lodz University of Technology.
• [3] Szatkowski, K. (2014). Modern Production Management, Process Approach. Warszawa: PWN.
• [4] Antosz K., Pacyna A. (2016). Lean Manufacturing. Improvement of production. Rzeszów: Rzeszow University of Technology Publishing House.
• [5] Władysiak, R. (2006). Reengineering of Precision Casting production System. Archives of Foundry, 19, 413-424.
• [6] Jezierski, J. & Janerka, K. (2013). The Lean Manufacturing tools in polish foundries. Archives of Metallurgy and Materials. 58(3), 937-940.
• [7] Prasad. S., Khanduja. D. & Sharma, S.K. (2016). An empirical study on applicability of lean and green practices in foundry industry. Journal of Manufacturing Technology Management. 27, 408-426.
• [8] Torielli, R.M., Abrahams, R.A., Smillie, R.W., Voigt, R.C. (2010). Using lean metodologies for economically and envirimentally sustainable foundries. 69th World Foundry Congress, 2, 710-726.
• [9] Singh, V., Mani, V.G.S., Kollanus, J.(2010).Lean operations in a foundry trough a manufacturing oriented ERP software. 69th World Foundry Congress, 2, 791-797.
• [10] Nadolski, M., Konopka, Z., Łągiewka, M. & Zyska, A. (2010). Decorative Layers on Tin Bronzes, Archives of Foundry Engineering. 10(4), 153-156.
• [11] Władysiak, R., Kozuń, A. & Pacyniak, T. (2017). The Effect of Water Mist Cooling of Casting Die on the Solidification, Microstructure and Properties of AlSi20 Alloy. Archives of Metallurgy and Materials. 62(1), 187-194.
• [12] Bydałek, A.W. (2006). The influence of nitride on the melting Cu-Al alloys conductions. Metalurgija. 45(1), 41-44.
• [13] Rapiejko, C., Pisarek, B. & Pacyniak, T. (2017). Effect of intensive cooling of alloy AM60 with chromium and vanadium additions on cast microstructure and mechanical properties. Archives of Metallurgy and Materials. 62(1), 309-314.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)