Synthesis of quasi-optimal motion crane’s control in the form of feedback

• Autorzy: Lovejkin V. , Romasevich Y. , Chovnuk Y.
• Języki publikacji: EN

Abstrakty

EN

The solution of the problem of optimal crane’s control is proposed in this article. The crane’s model is adopted as two-mass. The synthesized quasi-optimal control allows one to eliminate vibrations during braking load of the crane. Control is a function of phase coordinates of dynamic system ”truck-load“ and it’s limited in size. One may use for the solution of the problem the method of dynamic programming. The results are illustrated with the help of graphics which are bold on the phase planes.

Słowa kluczowe

EN

quasi-optimal control; crane; load vibrations; dynamic programming; control in the form of feedback

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2013
• Tom: Vol. 7, No. 3
• Strony: 31--36
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Lovejkin V.

• Chair of Machine Construction, National University of Life and Environmental Sciences of Ukraine, Heroyiv Oborony st., 15, Kyiv, 03041, Ukraine.

autor

Romasevich Y.

• Chair of Machine Construction, National University of Life and Environmental Sciences of Ukraine, Heroyiv Oborony st., 15, Kyiv, 03041, Ukraine.

autor

Chovnuk Y.

• Chair of Machine Construction, National University of Life and Environmental Sciences of Ukraine, Heroyiv Oborony st., 15, Kyiv, 03041, Ukraine.

Bibliografia

• [1] Sakawa Y., Shindo Y. “Optimal control of container cranes”, Automatica, vol. 18, no. 3, 1982, pp. 257–266.
• [2] Hanafy M. Omar, Control of Gantry and Tower Cranes. – Ph.D. Dissertation, Blacksburg, Virginia, Virginia Polytechnic Institute, 2003.
• [3] Mahdieh A., Zarabadipour H., Mahdi A. S., “Antiswing control of a double-pendulum-type overhead crane using parallel distributed fuzzy LQR controller“, International Journal of the Physical Sciences, vol. 6(35), 2011, pp. 7850–7856.
• [4] Chengyuan C., Shihwei H., Kuohung C., “A practical fuzzy controllers scheme of overhead crane“, Journal of Control Theory and Applications, vol 3, 2005, pp. 266–270.
• [5] Mohammad R., Akbarzadeh T., Amir H. “Fuzzy Modeling of Human Control Strategy for Head Crane”. In: IEEE International Fuzzy Systems Conference, 2001, pp. 1076–1079.
• [6] Kogure H., Tojo M. “Recent developments in crain control”, Hitachi Rev., vol 6, 1978, pp. 315–320.
• [7] SmartCrane™ Anti-Sway Crane Control Products, Product Descriptions, 2010 SmartCrane, LLC.
• [8] Siemens SIMOCRANE Crane Management System, System Manual, Valid for version 4.1, 2009.
• [9] Solihin M. I., Wahyudi “Sensorless Anti-swing Control for Automatic Gantry Crane System: Model-based Approach“, International Journal of Applied Engineering Research, vol. 2, no.1, 2007, pp. 147–161.
• [10] Ahmad M.A., Raja Ismail R.M.T., Ramli M.S., Abdul Ghani N.M. , Zawawi M.A., “Optimal Tracking with Sway Suppression Control for a Gantry Crane System“, European Journal of Scientific Research, vol. 3, no. 4, 2009, pp. 630–641.
• [11] Keum-Shik H., Quang Hieu N., “Port Automation: Modeling and Control of Container Cranes“. In: International Conference on Instrumentation,Control & Automation, Bandung, Indonesia, October, 2009, pp. 1076–1079.
• [12] Bellman R., Dreyfus E., Applied Dynamic Programming, Princeton University Press, Princeton, USA, 1962.
• [13] Kwakernaak H., Sivan R., Linear Optimal Control Systems, John Wiley & Sons Inc., New York, 1972