Preparation and Recycling of Carbon Containing Composites

• Autorzy: Zagórski K. , Rusek P.
• Języki publikacji: EN

Abstrakty

EN

Composites based on anthracite grains and carbon scrap containing also two mirror components were investigated. A milling machine allowing cutting speeds in the 100-400mm/min range connected to a piezoelectric dynamometer and a video camera was used. The debris formed was screened through sieves and chips with sizes larger than 1 mm can be recycled. Cutting resistance of the composite depends on the local distribution of the carbon scrap phase.

Słowa kluczowe

EN

carbon composites; machining; scrap recycling

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2013
• Tom: Vol. 13, No. 4
• Strony: 77--86
• Opis fizyczny: Bibliogr. 16 poz., rys., fot.

Twórcy

autor

Zagórski K.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Cracow, Poland

autor

Rusek P.

• The Institute of Advanced Manufacturing Technology, Cracow, Poland

Bibliografia

• [1] SZYMCZYK A., ROSLANIEC Z., ZENKER M., GARCIA-GUTIERREZ M.C., HERNANDEZ J.J, RUEDA D.R., NOGALES A. & EZQUERRA T.A., 2011, Preparation and characterization of nanocomposites based on COOH functionalized multi-walled carbon nanotubes and on poly (trimethylene terephthalate), Express Polymer Letters, 5, 977-995.
• [2] ROSLANIEC Z., BROZA G. and SCHULTE K., 2003, Nanocomposites based on multiblock polyester elastomers (PEE) and carbon nanotubes (CNT), Compos. Interfaces, 10, 95-102.
• [3] NOGALES A., BROZA G., ROSLANIEC Z., SCHULTE K., SICS I., HSIAO S., SANZ A., GARCIA- GUTIERREZ M.C., RUEDA D.R., DOMINGO C. & EZQUERRA T.A, 2004, Low percolation threshold in nanocomposites based on oxidized single wall carbon nanotubes and poly(butylene terephthalate), Macromolecules, 37, 7669-7672.
• [4] BROZA G. & SCHULTE K., 2008, Melt processing and filler/matrix interphase in carbon nanotube reinforced poly(ether-ester) thermoplastic elastomer, Polymer Eng. & Sci. 48, 2033-2038.
• [5] ARRIBAS A., BERMUDEZ M.D., BROSTOW W., CARRION-VILCHES F.J. & OLEA-MEJIA O., 2009, New epoxy-ionic liquid dispersions. Room temperature ionic liquid as lubricant of epoxy resin-stainless steel contacts Express Polymer Letters, 3, 621-269.
• [6] KOTA A.KA, B.H., CIPRIANO, POWELL D., RAGHAVAN S.R. and BRUCK H.A., 2007, Quantitative characterization of the formation of an interpenetrating phase composite in polystyrene from the percolation of multiwalled carbon nanotubes Nanotechnology, 18, 505705.
• [7] KRAMER R.H., RAZA M.A. & GEDDE U.W., 2007, Degradation of poly(ethylene-co-methacrylic acid)–calcium carbonate nanocomposites, Polymer Degrad. & Stab., 92, 1795-1802.
• [8] BROSTOW W., HAGG LOBLAND H.E. and NARKIS M., 2006, Sliding wear, viscoelasticity and brittleness of polymers, J. Mater. Res 21, 2422.
• [9] BROSTOW W. and HAGG LOBLAND H.E., 2010, Brittleness of materials: implications for composites and a relation to impact strength, Mater. Sci, 45, 242-250.
• [10] SKOCZKOWSKI K., 1998, Covers carbon-graphite, Śląskie Wydawnictwo Techniczne, Gliwice, (in Polish).
• [11] KOŁODZIEJ J., SKORUPA A., ZAGÓRSKI K., 2004, Investigation on the dispersion of chips in carbon materials cutting, Karbo, 4, 234-237, (in Polish).
• [12] BROSTOW W., DATASHVILI T., KAO D. & TOO J., 2010, Tribological properties of LDPE + boehmite composites, Polymer Compos., 31, 417-425.
• [13] ADHIKARI R., BROSTOW W., DATASHVILI T., HENIING S., MENARD B., MENARD K.P. & MICHLER G.H., 2012, Effect of surfactant treated boehmite nanoparticles on properties of block copolymers, Mater. Res. Innovat., 16, 19-24.
• [14] BILYEU B., BROSTOW W., CHUDEJ L., ESTEVEZ M., HAGG LOBLAND H.E., RODRIGUEZ J.R. & VARGAS S., 2007, Scratch resistance of different silica filled resins for obturation materials, Mater.Res. Innovat., 11, 181.
• [15] BROSTOW W., ESTEVEZ M., HAGG LOBLAND H.E., HOANG L., RODRIGUEZ J.R. & VARGAS S., 2008, Porous hydroxyapatite-based obturation materials for dentistry, J. Mater. Res. 23, 1587-1596.
• [16] GENCEL O., KOKSAL F. and BROSTOW W., 2012, Effect of high temperature on mechanical properties of lightweight concrete produced by using expanded vermiculite, J. Mater. Res., 16, 7-13.